Printing out the SAL

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word
document. You can then save and print it.

Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.

MargW

On 3/19/09 9:11 AM, "MargW" wrote:

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word
document. You can then save and print it.

Good hint for people.

Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.

MargW

FWIW, there are a bunch of threads that will work in lieu of the 1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the photos I took
of 8 colorways, with a couple of sub-variations. Instead of ribbon floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays, and
1/16 Kreinik ribbon. Personally, I just don't like working with the riboon
floss, and find the PSR nicer to work with.

Ellice

ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote:

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word
document. You can then save and print it.

Good hint for people.

Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.

MargW

FWIW, there are a bunch of threads that will work in lieu of the 1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the photos I took
of 8 colorways, with a couple of sub-variations. Instead of ribbon floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays, and
1/16 Kreinik ribbon. Personally, I just don't like working with the riboon
floss, and find the PSR nicer to work with.

Ellice



Thanks, Ellice:

I suspect that is what I'll end up doing. I have lots of different
fibers to play with, so I'm sure I can come up with something that works.

MargW

On 3/19/09 3:41 PM, "MargW" wrote:

ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote:

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word
document. You can then save and print it.

Good hint for people.

Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.

MargW

FWIW, there are a bunch of threads that will work in lieu of the 1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the photos I took
of 8 colorways, with a couple of sub-variations. Instead of ribbon floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays, and
1/16 Kreinik ribbon. Personally, I just don't like working with the riboon
floss, and find the PSR nicer to work with.

Ellice



Thanks, Ellice:

I suspect that is what I'll end up doing. I have lots of different
fibers to play with, so I'm sure I can come up with something that works.

MargW

You're welcome. I've no doubt you'll find something fun!

Also, I just uploaded into the files section a 2 page file of the various
colorways I pulled. Supposedly, Yahoo is sending a message to the group,
but who knows. I'm still having trouble uploading the photos.

ellice

"ellice" wrote in message
...
On 3/19/09 3:41 PM, "MargW" wrote:

ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote:

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a
Word
document. You can then save and print it.

Good hint for people.

Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.

MargW

FWIW, there are a bunch of threads that will work in lieu of the 1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the photos I
took
of 8 colorways, with a couple of sub-variations. Instead of ribbon
floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays,
and
1/16 Kreinik ribbon. Personally, I just don't like working with the
riboon
floss, and find the PSR nicer to work with.

Ellice



Thanks, Ellice:

I suspect that is what I'll end up doing. I have lots of different
fibers to play with, so I'm sure I can come up with something that works.

MargW

You're welcome. I've no doubt you'll find something fun!

Also, I just uploaded into the files section a 2 page file of the various
colorways I pulled. Supposedly, Yahoo is sending a message to the group,
but who knows. I'm still having trouble uploading the photos.

ellice

I only saw one photo and when I tried to get the PDF file I got a message
saying it wasn't "Accessible."

On Mar 19, 4:24 pm, "lucille" wrote:
"ellice" wrote in message

...



On 3/19/09 3:41 PM, "MargW" wrote:

ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote:

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a
Word
document. You can then save and print it.

Good hint for people.

Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.

MargW

FWIW, there are a bunch of threads that will work in lieu of the 1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the photos I
took
of 8 colorways, with a couple of sub-variations. Instead of ribbon
floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays,
and
1/16 Kreinik ribbon. Personally, I just don't like working with the
riboon
floss, and find the PSR nicer to work with.

Ellice

Thanks, Ellice:

I suspect that is what I'll end up doing. I have lots of different
fibers to play with, so I'm sure I can come up with something that works.

MargW

You're welcome. I've no doubt you'll find something fun!

Also, I just uploaded into the files section a 2 page file of the various
colorways I pulled. Supposedly, Yahoo is sending a message to the group,
but who knows. I'm still having trouble uploading the photos.

ellice

I only saw one photo and when I tried to get the PDF file I got a message
saying it wasn't "Accessible."



I can view the photos, but the files come up as unaccessible.

Donna in Virginia

wrote in message
...
On Mar 19, 4:24 pm, "lucille" wrote:
"ellice" wrote in message

...



On 3/19/09 3:41 PM, "MargW" wrote:

ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote:

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a
Word
document. You can then save and print it.

Good hint for people.

Looking at the instructions, I think I'm going to have to buy some
of
the ribbon floss since I only have a couple of colours in my stash,
and
they aren't the ones I want to use.

MargW

FWIW, there are a bunch of threads that will work in lieu of the
1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the photos I
took
of 8 colorways, with a couple of sub-variations. Instead of ribbon
floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon
Rays,
and
1/16 Kreinik ribbon. Personally, I just don't like working with the
riboon
floss, and find the PSR nicer to work with.

Ellice

Thanks, Ellice:

I suspect that is what I'll end up doing. I have lots of different
fibers to play with, so I'm sure I can come up with something that
works.

MargW

You're welcome. I've no doubt you'll find something fun!

Also, I just uploaded into the files section a 2 page file of the
various
colorways I pulled. Supposedly, Yahoo is sending a message to the
group,
but who knows. I'm still having trouble uploading the photos.

ellice

I only saw one photo and when I tried to get the PDF file I got a message
saying it wasn't "Accessible."



I can view the photos, but the files come up as unaccessible.

Donna in Virginia

I can only view one photo and the files come up inaccessible for me too.

L

wrote:
On Mar 19, 4:24 pm, "lucille" wrote:
"ellice" wrote in message

...



On 3/19/09 3:41 PM, "MargW" wrote:
ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote:
I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site.
Maybe I missed the instructions for selecting just one pattern.
If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a
Word
document. You can then save and print it.
Good hint for people.
Looking at the instructions, I think I'm going to have to buy some of
the ribbon floss since I only have a couple of colours in my stash, and
they aren't the ones I want to use.
MargW
FWIW, there are a bunch of threads that will work in lieu of the 1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the photos I
took
of 8 colorways, with a couple of sub-variations. Instead of ribbon
floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays,
and
1/16 Kreinik ribbon. Personally, I just don't like working with the
riboon
floss, and find the PSR nicer to work with.
Ellice
Thanks, Ellice:
I suspect that is what I'll end up doing. I have lots of different
fibers to play with, so I'm sure I can come up with something that works.
MargW
You're welcome. I've no doubt you'll find something fun!
Also, I just uploaded into the files section a 2 page file of the various
colorways I pulled. Supposedly, Yahoo is sending a message to the group,
but who knows. I'm still having trouble uploading the photos.
ellice
I only saw one photo and when I tried to get the PDF file I got a message
saying it wasn't "Accessible."



I can view the photos, but the files come up as unaccessible.

Donna in Virginia

I just found the same thing. I am leaning towards the "meadow" one with
the pinks and greens.

Gill

lucille wrote:

wrote in message
...
On Mar 19, 4:24 pm, "lucille" wrote:
"ellice" wrote in message

...



On 3/19/09 3:41 PM, "MargW" wrote:

ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote:

I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the
site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern you
want, ^C (control+C for copy), and paste it (^V - Control+V) into a
Word
document. You can then save and print it.

Good hint for people.

Looking at the instructions, I think I'm going to have to buy
some of
the ribbon floss since I only have a couple of colours in my
stash, and
they aren't the ones I want to use.

MargW

FWIW, there are a bunch of threads that will work in lieu of the
1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the
photos I
took
of 8 colorways, with a couple of sub-variations. Instead of ribbon
floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger),
Neon Rays,
and
1/16 Kreinik ribbon. Personally, I just don't like working with the
riboon
floss, and find the PSR nicer to work with.

Ellice

Thanks, Ellice:

I suspect that is what I'll end up doing. I have lots of different
fibers to play with, so I'm sure I can come up with something that
works.

MargW

You're welcome. I've no doubt you'll find something fun!

Also, I just uploaded into the files section a 2 page file of the
various
colorways I pulled. Supposedly, Yahoo is sending a message to the
group,
but who knows. I'm still having trouble uploading the photos.

ellice

I only saw one photo and when I tried to get the PDF file I got a
message
saying it wasn't "Accessible."



I can view the photos, but the files come up as unaccessible.

Donna in Virginia

I can only view one photo and the files come up inaccessible for me too.

L
LUcille,

I clicked on the one picture, and the rest came up for me.

G

"Gillian Murray" wrote in message
...
lucille wrote:

wrote in message
...
On Mar 19, 4:24 pm, "lucille" wrote:
"ellice" wrote in message

...



On 3/19/09 3:41 PM, "MargW" wrote:

ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote:

I found when I went to Laura Perin's freebies, that only the
latest
freebie would print out when following the instructions on the
site.
Maybe I missed the instructions for selecting just one pattern.

If you encounter the same problem, simply highlight the pattern
you
want, ^C (control+C for copy), and paste it (^V - Control+V) into
a
Word
document. You can then save and print it.

Good hint for people.

Looking at the instructions, I think I'm going to have to buy
some of
the ribbon floss since I only have a couple of colours in my
stash, and
they aren't the ones I want to use.

MargW

FWIW, there are a bunch of threads that will work in lieu of the
1/16"
ribbon floss. I'm in the midst of getting Yahoo to load the
photos I
took
of 8 colorways, with a couple of sub-variations. Instead of ribbon
floss I
used either Petite Sparkle Rays, Fyrewerks (slightly bigger),
Neon Rays,
and
1/16 Kreinik ribbon. Personally, I just don't like working with
the
riboon
floss, and find the PSR nicer to work with.

Ellice

Thanks, Ellice:

I suspect that is what I'll end up doing. I have lots of different
fibers to play with, so I'm sure I can come up with something that
works.

MargW

You're welcome. I've no doubt you'll find something fun!

Also, I just uploaded into the files section a 2 page file of the
various
colorways I pulled. Supposedly, Yahoo is sending a message to the
group,
but who knows. I'm still having trouble uploading the photos.

ellice

I only saw one photo and when I tried to get the PDF file I got a
message
saying it wasn't "Accessible."



I can view the photos, but the files come up as unaccessible.

Donna in Virginia

I can only view one photo and the files come up inaccessible for me too.

L
LUcille,

I clicked on the one picture, and the rest came up for me.

G

Yep--I tried again a moment ago and they all came up like good little
soldiers. I still couldn't get into the file.