If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Cleaning my old Singer sm
My poor ol' 1950 Singer 15-91 spent 3 years in the garage with Missouri's
heat and cold and high humidity. It has this thick, brown-ish colored, sticky, greasy feeling film on it- it's much like the cooked-on grease you sometimes see on the bottom of frying pans. Any thoughts on some thing safe to clean it- that won't mess up the lovely decals or the black paint? I usually start with dish liquid and water, applied and wiped off a few times. Then I follow with sewing machine oil. Works well on all sorts of grime. Apply, let set, wipe off. See if that gets you very far. Avoid ammonia-containing cleaners, as they'll silver the decals. How far do you intend to go with the cleaning? You might want to check in at the yahoo group "wefixit", which has a lot of good files on machine restoration. There's also a Singer 15-91 adjuster's manual in the files section of that group, a subfile of "Leo's Manual Database". You can get the parts lists/diagrams from Singer, too. Kay |
Ads |
#12
|
|||
|
|||
Cleaning my old Singer sm
On Sep 15, 2:09*pm, "Leslie& The Furbabies in MO."
wrote: My poor ol' 1950 Singer 15-91 spent 3 years in the garage with Missouri's heat and cold and high humidity. *It has this thick, brown-ish colored, sticky, greasy feeling film on it- it's much like the cooked-on grease you sometimes see on the bottom of frying pans. *Any thoughts on some thing safe to clean it- that won't mess up the lovely decals or the black paint? Also, I hear y'all talking about cleaning and lubing the old machines to get them running well. * Can somebody tell me *exactly* how to do it? * Not just 'clean it well' but how do you get up into the innards, what do you use for wiping and for removing the gunk, and how do you know if something up in there needs help or special attention? *What product do you use to lube it and where? *All the research I did some time ago really didn't say how to get to the stuff- just a broad 'clean it' and 'lubricate it' statement. * I need very detailed specific instructions, *please. *Help? Leslie & The Furbabies in MO Leslie, can't help you with preserving the decals while de-gunking, but wanted to lend a tip about what happened to my aunt's 15-91 after spending a couple years in the garage in humid Dallas. Apparently she got some rust issues in some important places (happens to the best of us, ha). She had to have a good going-over by a pro. Hope this isn't a problem for the innards of your 15-91. Best of luck with it. I have such an affinity for those old girls. Sherry |
#13
|
|||
|
|||
Cleaning my old Singer sm
On Sep 15, 4:24*pm, "Polly Esther" wrote:
Leslie, don't do much until you hear from Irene too. *She may want to toss in some other ideas. *And beggin' Miss Nancy's pardon, but antique and vintage Singers are both valuable and beloved. *Tread gently. *Polly ... On 15/09/2010 20:09, Leslie& The Furbabies in MO. wrote: My poor ol' 1950 Singer 15-91 spent 3 years in the garage with Missouri's heat and cold and high humidity. It has this thick, brown-ish colored, sticky, greasy feeling film on it- it's much like the cooked-on grease you sometimes see on the bottom of frying pans. Any thoughts on some thing safe to clean it- that won't mess up the lovely decals or the black paint? Also, I hear y'all talking about cleaning and lubing the old machines to get them running well. Can somebody tell me *exactly* how to do it? Not just 'clean it well' but how do you get up into the innards, what do you use for wiping and for removing the gunk, and how do you know if something up in there needs help or special attention? What product do you use to lube it and where? All the research I did some time ago really didn't say how to get to the stuff- just a broad 'clean it' and 'lubricate it' statement. I need very detailed specific instructions, please. Help? Leslie & The Furbabies in MO- Hide quoted text - - Show quoted text - ....not according to my local market or my antiqueing peers. A few are; 90% are not. Typewriters fall into the same iffy category. But, if she treasures it, that's all that counts. ;-) N. |
#14
|
|||
|
|||
Cleaning my old Singer sm
On Sep 15, 4:30*pm, "J*" wrote:
In fact, most Singer sewing machines have no value at all (in terms of being "vintage" or "antique" - the term "boat anchor" comes up frequently). no value??? boat anchor???? so i guess they dont float your boat then. the mind boggles. boing boing j. "Nancy2" * wrote ... I have a "de-gunking" product from my local Ace hardware store that removes baked-on gunk without removing a colored coating (like on my electric frypan). *It might be called, "Goop," but I'm not sure of the name. * You could try mineral spirits first. Whatever, I'd hesitate to use it over the logo, if that's important to you. *In fact, most Singer sewing machines have no value at all (in terms of being "vintage" or "antique" - the term "boat anchor" comes up frequently). *If you like it and can use it, that to me would be where the value is, and you don't need the logo in order for it work for you. *That's just my opinion. As to the innards, I'd take it to a pro....it may need some fine- tuning and adjustments that you just aren't able to do yourself. N. * "Leslie& The Furbabies in MO." * wrote: My poor ol' 1950 Singer 15-91 spent 3 years in the garage with Missouri's heat and cold and high humidity. It has this thick, brown-ish colored, sticky, greasy feeling film on it- it's much like the cooked-on grease you sometimes see on the bottom of frying pans. Any thoughts on some thing safe to clean it- that won't mess up the lovely decals or the black paint? Also, I hear y'all talking about cleaning and lubing the old machines to get them running well. Can somebody tell me *exactly* how to do it? Not just 'clean it well' but how do you get up into the innards, what do you use for wiping and for removing the gunk, and how do you know if something up in there needs help or special attention? What product do you use to lube it and where? All the research I did some time ago really didn't say how to get to the stuff- just a broad 'clean it' and 'lubricate it' statement. I need very detailed specific instructions, please. Help? Leslie & The Furbabies in MO- Hide quoted text - - Show quoted text - Antique sewing machines don't actually float my boat, but I'm speaking of a general antique market, not just me. Believe what you like. I guess if you find a market, that's great for all concerned....if you want to sell one, that is. My impression was that she wanted to use it herself, in which case, make it usable, whatever that involves. We can agree to disagree. ;-) N. |
#15
|
|||
|
|||
Cleaning my old Singer sm
i know little about antiques of any kind. it may be a small market but there is a market for these, of that i am sure. i just made a simple statement on my view of old singer sewing machines. i'd love to have an old treadle. i actually have a handturn but it needs some work and finding what i need here in nz aint gonna happen. so i'll just hang on to my grandmas or my aunts, i'm not sure who owned it, just for the sentimental value. i'm not sewing anyhow so makes no difference. i'm curious now why you replied to my reply when i really have no knowledge of the issue. i just know they are highly prized by a lot of us quilters in cyberspace from what i've read and a few chats with a few of them. so why me? surely replying to Irene makes more sense, she is a restorer/reseller of those wee beautys. ya know what, dont even reply to this, just reply to Irenes reply. going back to facebook now. j. "Nancy2" wrote ... Antique sewing machines don't actually float my boat, but I'm speaking of a general antique market, not just me. Believe what you like. I guess if you find a market, that's great for all concerned....if you want to sell one, that is. My impression was that she wanted to use it herself, in which case, make it usable, whatever that involves. We can agree to disagree. ;-) N. "J*" wrote: In fact, most Singer sewing machines have no value at all (in terms of being "vintage" or "antique" - the term "boat anchor" comes up frequently). no value??? boat anchor???? so i guess they dont float your boat then. the mind boggles. boing boing j. "Nancy2" wrote ... I have a "de-gunking" product from my local Ace hardware store that removes baked-on gunk without removing a colored coating (like on my electric frypan). It might be called, "Goop," but I'm not sure of the name. You could try mineral spirits first. Whatever, I'd hesitate to use it over the logo, if that's important to you. In fact, most Singer sewing machines have no value at all (in terms of being "vintage" or "antique" - the term "boat anchor" comes up frequently). If you like it and can use it, that to me would be where the value is, and you don't need the logo in order for it work for you. That's just my opinion. As to the innards, I'd take it to a pro....it may need some fine- tuning and adjustments that you just aren't able to do yourself. N. "Leslie& The Furbabies in MO." wrote: My poor ol' 1950 Singer 15-91 spent 3 years in the garage with Missouri's heat and cold and high humidity. It has this thick, brown-ish colored, sticky, greasy feeling film on it- it's much like the cooked-on grease you sometimes see on the bottom of frying pans. Any thoughts on some thing safe to clean it- that won't mess up the lovely decals or the black paint? Also, I hear y'all talking about cleaning and lubing the old machines to get them running well. Can somebody tell me *exactly* how to do it? Not just 'clean it well' but how do you get up into the innards, what do you use for wiping and for removing the gunk, and how do you know if something up in there needs help or special attention? What product do you use to lube it and where? All the research I did some time ago really didn't say how to get to the stuff- just a broad 'clean it' and 'lubricate it' statement. I need very detailed specific instructions, please. Help? Leslie & The Furbabies in MO- Hide quoted text - |
#16
|
|||
|
|||
Cleaning my old Singer sm
For cleaning and restoring the innards and other working parts, look he http://www.tfsr.org/publications/tec...machine_manual It's the clearest and most comprehensive set of instructions for restorung this type of machine to use that I've seen. I second that link, Kate. If I find old round bobbin machines they go to TFSR, a very worthy cause. I've got a bit addicted to old sewing machines; no built in obsolesence and they actually get better and better over time. I'm in awe of the engineering and the stitch is perfect, albeit only straight stitch. Now I just need an old Singer overlocker....... and a bigger house! Carrie |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Singer 401 and 500 and Singer CG-500 | McIntoshDonnie | Sewing | 0 | October 12th 06 09:01 PM |
Cleaning SM | MAmadurk | Quilting | 11 | May 30th 05 10:34 PM |
cleaning out | Gail M. | Quilting | 5 | February 29th 04 11:53 PM |
Cleaning Out | Vanessa Stern | Needlework | 0 | January 26th 04 05:22 PM |
Vintage Singer OT More singer advice needed | Pat in Virginia | Quilting | 1 | December 9th 03 12:41 PM |