A crafts forum. CraftBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CraftBanter forum » Craft related newsgroups » Pottery
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

skutt 1227



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old July 7th 09, 05:58 AM posted to rec.crafts.pottery
stan
external usenet poster
 
Posts: 1
Default skutt 1227

Hi, all.

I recently aquired a skutt 1227, but it is 3-phase 208 at 31 Amps. For
those who don't know, 3-phase is 208 volt times 3, and the skutt 1227
has 3 sections, so each section could draw 31 amps.

Naturally, I am in a residential area, so I only have access to single-
phase 230 volt at perhaps 50 amps. Fortunately, I am not interested in
getting the whole thing running. If I could get even one section
running would be fine.

I think that I can remove two sections and run just one section on
single-phase 230. 230v is only 11% more voltage than 208, so it should
have a good chance of working, right?
I figure that I will start with high and see if the coils get too hot
too quickly. If that seems good, I can try low and see what it temp it
gets up to, then medium and last high.

Has anyone tried such an experiment?
Any advice for a noob? *grin*
Thanks in advance.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
1027 Skutt for sale in SC Randy[_2_] Pottery 0 December 21st 07 02:15 PM
Skutt Kiln Brick replacement Jim Pottery 0 January 28th 07 07:11 PM
Help with price of Skutt model 181 bakerhillpins Pottery 5 October 16th 06 07:35 PM
Skutt kiln Deborah M Riel Pottery 4 July 15th 05 07:23 PM
Skutt & Son Pottery Wheel? Pete Wolcott Pottery 2 July 5th 04 02:50 AM


All times are GMT +1. The time now is 01:56 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CraftBanter.
The comments are property of their posters.