OT Studio baby steps

So now that I know that I'm not moving to Atlanta I decided I need to get on
with setting up my lampworking stuff properly

I bought and awesome stainless steel table around Christmas and after
holidays, travel, new relationship, end of relationship, travel, I just
finished getting it put together. It's very cool but a little high. The top
is totally stainless steel and it has a shelf on the bottom. I got it at
Sam's club.

My AIM kiln is in and is downstairs - but not set up yet. I found I do have
an appropriate outlet (yay- since this is a rental house that could have
been a real problem). I need to do some major moving around of stuff in the
basement (old doors, railing, other crap that really is my landlady's etc)
to get it's place ready.

I had a dream about glass last night - I had bunches and bunches - all
types - types I don't even have a torch that would melt, and I was arranging
the glass getting ready to take it somewhere. Then all of the sudden people
were there telling me it was time to go (escape) and were helping me carry
the glass.

So hopefully very soon I can get back at it AND be able to anneal my beads!

Kathy K

KDK wrote:
snippity
I bought and awesome stainless steel table around Christmas and after
holidays, travel, new relationship, end of relationship, travel, I just
finished getting it put together. It's very cool but a little high. The top
is totally stainless steel and it has a shelf on the bottom. I got it at
Sam's club.

Is there any way you can get the legs sawed off a little so the table sits at
the right height?

snippity
So hopefully very soon I can get back at it AND be able to anneal my beads!

Ok, I'm ashamed..I had no clue you even made beads. Now I wanna see!!!!!!!!!



~Candace~

Kathy -- good luck with it, and may your dreams NOT come true! LOL

I had a really bad dream about the man I left in Ohio, night before last. Took
me all day to shake it. It reminded me again, however, that I am glad I am not
around him anymore.


Becki
"In between the moon and you, the angels have a better view of the crumbling
difference between wrong and right." -- Counting Crows

On Wed, 26 May 2004 23:28:54 -0400, "KDK"
wrote:


So hopefully very soon I can get back at it AND be able to anneal my beads!

Good luck and have fun with it, Kathy. Please do a show and tell.

--
Margie
http://www.picturetrail.com/margiek

Oooh, you have the same table I have... :-) Works great, but I also
have to figure out what to do about the height - the stool I'm using
right now is too high, and I end up all slouched over.

Karin

KDK wrote:

So now that I know that I'm not moving to Atlanta I decided I need to get on
with setting up my lampworking stuff properly

I bought and awesome stainless steel table around Christmas and after
holidays, travel, new relationship, end of relationship, travel, I just
finished getting it put together. It's very cool but a little high. The top
is totally stainless steel and it has a shelf on the bottom. I got it at
Sam's club.

My AIM kiln is in and is downstairs - but not set up yet. I found I do have
an appropriate outlet (yay- since this is a rental house that could have
been a real problem). I need to do some major moving around of stuff in the
basement (old doors, railing, other crap that really is my landlady's etc)
to get it's place ready.

I had a dream about glass last night - I had bunches and bunches - all
types - types I don't even have a torch that would melt, and I was arranging
the glass getting ready to take it somewhere. Then all of the sudden people
were there telling me it was time to go (escape) and were helping me carry
the glass.

So hopefully very soon I can get back at it AND be able to anneal my beads!

Kathy K

Don't know about sawing off the legs - they are metal also- and I don't;
have anything to cut them with

I'm picking up some good tall bar stools this weekend - wuth a back so that
might work. I'll let ya know as the progress continues.

Oh - I haven't made any beads since you started posting. I took a class
last summer then a worskhop with Tink in the fall, then was waiting on the
kiln, then waitng to get someone to move the kiln downstairs, yada yada
yada.

But it seems that things (and me) are coming together finally.

Kathy K

Thanks!

Actually I saw the dream as good sign - the glass was coming with me! Maybe
it was foreshadowing

Kathy K
"BeckiBead" wrote in message
...
Kathy -- good luck with it, and may your dreams NOT come true! LOL

I had a really bad dream about the man I left in Ohio, night before last.
Took
me all day to shake it. It reminded me again, however, that I am glad I
am not
around him anymore.


Becki
"In between the moon and you, the angels have a better view of the
crumbling
difference between wrong and right." -- Counting Crows

Thanks and as soon as I'm up and ,melting stuff again I'll be happy to do
S&T!

Kathy K
"Margie" wrote in message
...
On Wed, 26 May 2004 23:28:54 -0400, "KDK"
wrote:


So hopefully very soon I can get back at it AND be able to anneal my
beads!

Good luck and have fun with it, Kathy. Please do a show and tell.

--
Margie
http://www.picturetrail.com/margiek

I'm picking up some good tall bar stools this weekend - wuth a back so that
might work.

And if they're too tall, you can more easily saw their legs off a bit (usually
they're wood).
~~
Sooz
-------
"Those in the cheaper seats clap. The rest of you rattle your jewelry." John
Lennon (1940 - 1980) Royal Varieties Performance
~ Dr. Sooz's Bead Links
http://airandearth.netfirms.com/soozlinkslist.html

oh I can't wait to see something of yours, Kathy.

And yeah, it would be loads easier to get high stools than to saw the table
legs down.

Don't know about sawing off the legs - they are metal also- and I don't;
have anything to cut them with

I'm picking up some good tall bar stools this weekend - wuth a back so that
might work. I'll let ya know as the progress continues.

Oh - I haven't made any beads since you started posting. I took a class
last summer then a worskhop with Tink in the fall, then was waiting on the
kiln, then waitng to get someone to move the kiln downstairs, yada yada
yada.

But it seems that things (and me) are coming together finally.

Kathy K