If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
stiches problem HELP
ok i am not a good sew person but i do like the idea of sewing..does
that make sense? haha i have a sewing machine my aunt gave me with everything i need to sew but when i begin to sew i stitch a few times and i think all is ok and then BAM the stitches arent sewing on the fabric or they are bulking up and are a big bundle of th reads and i have to go back and rip it apart...i cant seem to get my sewing machine to just sew a straight simple stictch..i seem to have this problem often..i think maybe its the way im threading the needle or maybe the tension but i dont know what it should be on..im an idiot to this sort of stuff..i have so much material and threads and embellishmetns my aunt gave me and im wasting it by it sitting there.. any suggestions why my thread bundles or doesnt sew at all on the material? fustrated...cathy |
Ads |
#2
|
|||
|
|||
stiches problem HELP
You are correct in that it is the threading or the tension. What make
and model is your machine, which side do they bunch up on, and are you absolutely sure you are threading it properly? Maybe we can find a threading diagram for you -- there are some sites that post a lot of them for free. The other thing to try is to hold both threads when you start sewing so that they don't pull back into the seam line and make a mess. If you don't have a cheap piece-of-junk machine that won't hold its tension (been there, done that, trashed the machine and got my son an old machine from the 50s that works far better than the other one did even when brand new) you may not be able to permanently solve the problem without getting another machine, though. chatty cathy wrote: ok i am not a good sew person but i do like the idea of sewing..does that make sense? haha i have a sewing machine my aunt gave me with everything i need to sew but when i begin to sew i stitch a few times and i think all is ok and then BAM the stitches arent sewing on the fabric or they are bulking up and are a big bundle of th reads and i have to go back and rip it apart...i cant seem to get my sewing machine to just sew a straight simple stictch..i seem to have this problem often..i think maybe its the way im threading the needle or maybe the tension but i dont know what it should be on..im an idiot to this sort of stuff..i have so much material and threads and embellishmetns my aunt gave me and im wasting it by it sitting there.. |
#3
|
|||
|
|||
stiches problem HELP
When I read the machine was a gift the "cheap machine theory" was the first
thing that went through mind as well. Think I'll wait for answer on the make/model before making comments or suggestions. "Samantha Hill - remove TRASH to reply" wrote in message ... You are correct in that it is the threading or the tension. What make and model is your machine, which side do they bunch up on, and are you absolutely sure you are threading it properly? Maybe we can find a threading diagram for you -- there are some sites that post a lot of them for free. The other thing to try is to hold both threads when you start sewing so that they don't pull back into the seam line and make a mess. If you don't have a cheap piece-of-junk machine that won't hold its tension (been there, done that, trashed the machine and got my son an old machine from the 50s that works far better than the other one did even when brand new) you may not be able to permanently solve the problem without getting another machine, though. chatty cathy wrote: ok i am not a good sew person but i do like the idea of sewing..does that make sense? haha i have a sewing machine my aunt gave me with everything i need to sew but when i begin to sew i stitch a few times and i think all is ok and then BAM the stitches arent sewing on the fabric or they are bulking up and are a big bundle of th reads and i have to go back and rip it apart...i cant seem to get my sewing machine to just sew a straight simple stictch..i seem to have this problem often..i think maybe its the way im threading the needle or maybe the tension but i dont know what it should be on..im an idiot to this sort of stuff..i have so much material and threads and embellishmetns my aunt gave me and im wasting it by it sitting there.. |
#4
|
|||
|
|||
stiches problem HELP
Is there any way you can take a couple of photos of the problems you're seeing when you're sewing and post them someplace like picturetrail or flicker so we can see them, too? Are you getting loops on the back of the fabric? If so, that's probably due to a dirty upper tension or incorrect threading. When you thread the upper part of the machine, you need to raise the presser foot -- that opens the tension disks and lets the thread between the tension disks. If you've been playing with the upper tension knob, try setting it back to 4. When's the last time this machine was cleaned and oiled? That may have a lot to do with it. Kay |
#5
|
|||
|
|||
stiches problem HELP
My sewing machine is a kenmore table top with a case..my aunt kept this
oiled and cleaned cause she was a seamstress and so i dont have the guts to call her up and tell her my problem..she thinks i can sew well and although i didnt tell her that she just assumes.. the stitches i do are just a big bundle of knots and instead of sewing along the fabric they stay in one place and gather up till it gets too tight to do anymore or until i catch it.. i usually catch it cause im looking out for it.. i can try and take some photos but i will just attach them to the email here cause i dont have a place to take them..and dont know how.. this machine has many attachments and zig zags on it but heck i just like the straight stitch..i am simple..haha thanks all...cathy |
#6
|
|||
|
|||
stiches problem HELP
chatty cathy wrote:
My sewing machine is a kenmore table top with a case.. Model number/name? my aunt kept this oiled and cleaned cause she was a seamstress and so i dont have the guts to call her up and tell her my problem.. She might love the opportunity to help you out! ;-) She gave you the machine to love and care for, she surely wants you to enjoy using it. she thinks i can sew well and although i didnt tell her that she just assumes.. the stitches i do are just a big bundle of knots and instead of sewing along the fabric they stay in one place and gather up till it gets too tight to do anymore or until i catch it.. i usually catch it cause im looking out for it.. Sounds very much like a threading tension issue. Do you have the manual? If not, take a look here to see if they have a threading diagram for your machine: http://www.sewusa.com/Sewing_Machine...g_Diagrams.htm Also, be sure you have a new needle *inserted* correctly. i can try and take some photos but i will just attach them to the email here cause i dont have a place to take them..and dont know how.. You cannot attach photos to alt.sewing, this is a non-binary newsgroup not e-mail. You can upload photos to several online sites, then post the *URL* here. http://photobucket.com/ http://www.kodakgallery.com/Welcome....romlogo= true this machine has many attachments and zig zags on it You really need the manual, you'll want to properly maintain the machine. If a manual did not come with the machine, try locating one (either download or hardcopy). They have many manuals he http://www.sewusa.com/Sewing_Machine...on_Manuals.htm HTH, Beverly |
#7
|
|||
|
|||
stiches problem fixed!!!
i finally had mom take a look at it and me and her tinkered with it and
finally i took the bobbin apart..wow lots of dust bunnies in there..plus i had the tension wrong and also the wrong pressure foot..[good grief] then i also had it threaded wrong so i guess most of it was all my fault except for the bobbin part..but now all is fixed and im sewing a straight stitch and very happy... im learning to not be afraid of the machine and just get more involved with it..if i do that i can learn more.. thanks all for your help cathy |
#8
|
|||
|
|||
stiches problem fixed!!!
YAY!!!!! Happy sewing!
chatty cathy wrote: i finally had mom take a look at it and me and her tinkered with it and finally i took the bobbin apart..wow lots of dust bunnies in there..plus i had the tension wrong and also the wrong pressure foot..[good grief] then i also had it threaded wrong so i guess most of it was all my fault except for the bobbin part..but now all is fixed and im sewing a straight stitch and very happy... |
#9
|
|||
|
|||
stiches problem fixed!!!
chatty cathy wrote:
i finally had mom take a look at it and me and her tinkered with it and finally i took the bobbin apart..wow lots of dust bunnies in there..plus i had the tension wrong and also the wrong pressure foot..[good grief] then i also had it threaded wrong so i guess most of it was all my fault except for the bobbin part..but now all is fixed and im sewing a straight stitch and very happy... im learning to not be afraid of the machine and just get more involved with it..if i do that i can learn more.. thanks all for your help cathy Now that you have successfully solved these problems, you know that you can solve any future ones. Happy sewing to you! -- Joanne stitches @ singerlady.reno.nv.us.earth.milky-way.com http://members.tripod.com/~bernardschopen/ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sewing machine making very small stiches | Ed from AZ | Quilting | 8 | January 9th 08 06:07 AM |
Little Problem | Shillelagh | Yarn | 20 | October 27th 04 02:50 PM |
A few common Middle Eastern Stiches | Mirjam Bruck-Cohen | Needlework | 0 | January 23rd 04 06:09 AM |
Picking up heel stiches | Peggy Rogers | Yarn | 5 | September 22nd 03 12:14 AM |
MQ problem | DebsPrintOnIt | Quilting | 2 | July 14th 03 12:39 PM |