If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Microwave Kilns
Seems they were around some years back. Anybody know anything about them?
Jack http://www.glasterpiece.com |
Ads |
#2
|
|||
|
|||
Microwave Kilns
"nJb" wrote in message ... Seems they were around some years back. Anybody know anything about them? Jack I seem to remember some years back - maybe 10 or more - that I saw a promotion at a conference for a method to fire pottery in a microwave oven. It turned out to be a refractory container coated inside with some metallic substance which could attain a chamber temperature of 1000 + degrees C when placed in a microwave oven on high. Only trouble was that the container for a domestic microwave was tiny and almost useless - you would need an industrial strength and sized microwave to provide enough power to heat a decent sized chamber, which would probably cost more than a kiln anyway. I suspect the idea died a deserving death. Dave |
#3
|
|||
|
|||
Microwave Kilns
David Coggins wrote:
"nJb" wrote in message ... Seems they were around some years back. Anybody know anything about them? Jack I seem to remember some years back - maybe 10 or more - that I saw a promotion at a conference for a method to fire pottery in a microwave oven. It turned out to be a refractory container coated inside with some metallic substance which could attain a chamber temperature of 1000 + degrees C when placed in a microwave oven on high. Only trouble was that the container for a domestic microwave was tiny and almost useless - you would need an industrial strength and sized microwave to provide enough power to heat a decent sized chamber, which would probably cost more than a kiln anyway. I suspect the idea died a deserving death. Dave In addition to that, what my friend have experimented there is very little if any control of the temperature. She said it had to make a pair of earrings identical. One possible use might be PMC clay. With that price for material, miniature size is a blessing. -lauri |
#4
|
|||
|
|||
Microwave Kilns
I first started fusing with my little microwave kiln, got it maybe 20/25
years ago? (How long have microwaves been around?) any way, it was fun to play with and i still have one for museum puposes but there was no control and i do not recomend trying to learn on it. m "Lauri Levanto" wrote in message ... David Coggins wrote: "nJb" wrote in message ... Seems they were around some years back. Anybody know anything about them? Jack I seem to remember some years back - maybe 10 or more - that I saw a promotion at a conference for a method to fire pottery in a microwave oven. It turned out to be a refractory container coated inside with some metallic substance which could attain a chamber temperature of 1000 + degrees C when placed in a microwave oven on high. Only trouble was that the container for a domestic microwave was tiny and almost useless - you would need an industrial strength and sized microwave to provide enough power to heat a decent sized chamber, which would probably cost more than a kiln anyway. I suspect the idea died a deserving death. Dave In addition to that, what my friend have experimented there is very little if any control of the temperature. She said it had to make a pair of earrings identical. One possible use might be PMC clay. With that price for material, miniature size is a blessing. -lauri |
#5
|
|||
|
|||
Microwave Kilns
"nJb" wrote in message ... Seems they were around some years back. Anybody know anything about them? Jack http://www.glasterpiece.com They really worked great for small stuff. Where can you get to 1200 degrees in a few minutes? The reason they were pulled off the market was potenial contamination lawsuits from using it in a microwave that was also used for food. -- JK Sinrod www.SinrodStudios.com www.MyConeyIslandMemories.com |
#6
|
|||
|
|||
Microwave Kilns
On Nov 5, 11:09 pm, "glassman" wrote:
"nJb" wrote in message ... Seems they were around some years back. Anybody know anything about them? Jack http://www.glasterpiece.com They really worked great for small stuff. Where can you get to 1200 degrees in a few minutes? The reason they were pulled off the market was potenial contamination lawsuits from using it in a microwave that was also used for food. -- JK Sinrodwww.SinrodStudios.comwww.MyConeyIslandMemori es.com They're selling them here in the UK so I guess we're not so worried about contamination ;o) |
#7
|
|||
|
|||
Microwave Kilns
"Icxxi" wrote in message ups.com... On Nov 5, 11:09 pm, "glassman" wrote: "nJb" wrote in message ... Seems they were around some years back. Anybody know anything about them? Jack http://www.glasterpiece.com They really worked great for small stuff. Where can you get to 1200 degrees in a few minutes? The reason they were pulled off the market was potenial contamination lawsuits from using it in a microwave that was also used for food. -- They're selling them here in the UK so I guess we're not so worried about contamination ;o) Sleazier lawyers over here I'm thinking? -- JK Sinrod www.SinrodStudios.com www.MyConeyIslandMemories.com |
#8
|
|||
|
|||
Microwave Kilns
Sleazier lawyers over here I'm thinking? Is that some kind of pun ? or oxymoron ?? Ive melted doing a casting in a microwave. The trick is in the annealling. It does melt a handfull of glass in a brick/frax mold/enclosure. Used no metal. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
OT Microwave ovens | Karen C in California | Needlework | 1 | September 26th 07 11:10 PM |
sweet break -- microwave snack cake | Mary | Quilting | 6 | May 29th 07 04:03 AM |
Poll: curing polymer clay in the microwave? | Ferfal | Polymer Clay | 11 | October 19th 06 07:50 PM |
Microwave pot holders & 'Hi again' | RMcC | Quilting | 2 | October 16th 03 08:38 PM |
microwave drying services | Dirk | General Crafting | 0 | July 9th 03 12:12 PM |