If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
hi Ann,
always add at least 7/8" to the finished size of the hst you need. this will also give you enough for the seam. so for a 2inch hst when its in the quilt, start with 2 7/8" sqs of fabric. two different fabrics back to back, draw diagonal line across and sew a scant 1/4" either side of the line, then cut on the line. press towards the darker fabric. you can start with strips of 2 7/8" wide or bigger sqs/rectangles of an appropriate size. i'm off to find some of the urls i got in my favs folder with pix of some of the various ways. http://www.cottonwoodquilts.com/hst.htm http://ttsw.com/Blocks/TrianglePapers/Triangles.html geez, half the sites i got bookmarked dont exist any longer, how rude!!! hopefully these two, arghhh only two sorry bout that, will show you an easy way for you. by the way if you dont trust your scant 1/4" or just want to err on the side of caution, cut your starting sqs at one full inch bigger than you need. then you can/might have to trim afterwards. hope this all works out for you. good luck, jeanne* -- RCTQ Houston 2004 Party Animals A good friend will come and bail you out of jail.... but, a true friend will be sitting next to you saying, "Damn...that was fun!" i'll be there!!! will you??? "Ann" wrote... | When making HST, can you do it by sewing the 2 strips together, seam down | both sides.....then using your ruler cut on the 45 degree angle, flip ruler, | cut 45 degree again, all the way on your strip?? | | If you needed 2" hst block would you cut your strips 2 1/4"? | Thanks | | Ann --- Outgoing mail is certified Virus Free by AVG. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.507 / Virus Database: 304 - Release Date: 4/08/03 |
Ads |
#12
|
|||
|
|||
I add 7/8ths too thats how I was taught
Flossy Malvern England ***** Queen of Plaids ****** http://photos.yahoo.com/flossy3353 |
#13
|
|||
|
|||
Thanks everyone for your insight!!
I was wanting to "mass produce" hst so was curious about the strip method. Then I remebered I had bought a package of Thangles. They were 2" finished size so I worked with those last night. Turned out great. Now if only I was happier with my colour choice. I started doing the tumbling blocks using the hst pattern. I am doing it mainly in purples and the one colour is too dark. However, it's only a lapsize and I wanted to do something in hst before I start on the Barrister Block pattern that I really want to do. So all is not lost. Ann "nzl*" wrote in message ... hi Ann, always add at least 7/8" to the finished size of the hst you need. this will also give you enough for the seam. so for a 2inch hst when its in the quilt, start with 2 7/8" sqs of fabric. two different fabrics back to back, draw diagonal line across and sew a scant 1/4" either side of the line, then cut on the line. press towards the darker fabric. you can start with strips of 2 7/8" wide or bigger sqs/rectangles of an appropriate size. i'm off to find some of the urls i got in my favs folder with pix of some of the various ways. http://www.cottonwoodquilts.com/hst.htm http://ttsw.com/Blocks/TrianglePapers/Triangles.html geez, half the sites i got bookmarked dont exist any longer, how rude!!! hopefully these two, arghhh only two sorry bout that, will show you an easy way for you. by the way if you dont trust your scant 1/4" or just want to err on the side of caution, cut your starting sqs at one full inch bigger than you need. then you can/might have to trim afterwards. hope this all works out for you. good luck, jeanne* -- RCTQ Houston 2004 Party Animals A good friend will come and bail you out of jail.... but, a true friend will be sitting next to you saying, "Damn...that was fun!" i'll be there!!! will you??? "Ann" wrote... | When making HST, can you do it by sewing the 2 strips together, seam down | both sides.....then using your ruler cut on the 45 degree angle, flip ruler, | cut 45 degree again, all the way on your strip?? | | If you needed 2" hst block would you cut your strips 2 1/4"? | Thanks | | Ann --- Outgoing mail is certified Virus Free by AVG. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.507 / Virus Database: 304 - Release Date: 4/08/03 |
#14
|
|||
|
|||
DORTER!!!!!!!!!!
You're back!!!!!!!! been perty quiet wif you'ze not posting love Mom (when ya comin ta help deadhead roses--in time for the fall flush?) Lynne in Toronto wrote: The strip method works great...you get really nice, neat HST's. I use it whenever I have to make multiple HST's using multiple fabrics. There is some waste, but it is worth it to get perfect squares. If you still need advice about how wide to make the strips, I can look it up tonight in Fons and Porter. Cheers, Lynne in Toronto ......................... Ann wrote: Thanks Kathy But if you need a lot of HST the same, does the strip method work or not? Thought I would ask. Will probably play around and experiment with the strip method to get the right size of hst Ann "Ann" wrote in message news:QVwZa.29718$%T.8394@edtnps84... When making HST, can you do it by sewing the 2 strips together, seam down both sides.....then using your ruler cut on the 45 degree angle, flip ruler, cut 45 degree again, all the way on your strip?? If you needed 2" hst block would you cut your strips 2 1/4"? Thanks Ann |
#15
|
|||
|
|||
Ann, if you are doing a Barrister's Block, please consider using the strip method. I made a basket quilt last year with LOTS of HST's in it, and the strip method saved my bacon! And the answer to your original question is: make the bias strips one inch wider than the finished width of the square...so for your 2" finished sqs you would cut 3" bias strips. I also recommend the Fons and Porter book "Quilter's Complete Guide". It is really quite excellent. Only criticism...the table of contents could be a lot better! Cheers, Lynne in Toronto .................................. Ann wrote: Thanks everyone for your insight!! I was wanting to "mass produce" hst so was curious about the strip method. Then I remebered I had bought a package of Thangles. They were 2" finished size so I worked with those last night. Turned out great. Now if only I was happier with my colour choice. I started doing the tumbling blocks using the hst pattern. I am doing it mainly in purples and the one colour is too dark. However, it's only a lapsize and I wanted to do something in hst before I start on the Barrister Block pattern that I really want to do. So all is not lost. Ann "nzl*" wrote in message ... hi Ann, always add at least 7/8" to the finished size of the hst you need. this will also give you enough for the seam. so for a 2inch hst when its in the quilt, start with 2 7/8" sqs of fabric. two different fabrics back to back, draw diagonal line across and sew a scant 1/4" either side of the line, then cut on the line. press towards the darker fabric. you can start with strips of 2 7/8" wide or bigger sqs/rectangles of an appropriate size. i'm off to find some of the urls i got in my favs folder with pix of some of the various ways. http://www.cottonwoodquilts.com/hst.htm http://ttsw.com/Blocks/TrianglePapers/Triangles.html geez, half the sites i got bookmarked dont exist any longer, how rude!!! hopefully these two, arghhh only two sorry bout that, will show you an easy way for you. by the way if you dont trust your scant 1/4" or just want to err on the side of caution, cut your starting sqs at one full inch bigger than you need. then you can/might have to trim afterwards. hope this all works out for you. good luck, jeanne* -- RCTQ Houston 2004 Party Animals A good friend will come and bail you out of jail.... but, a true friend will be sitting next to you saying, "Damn...that was fun!" i'll be there!!! will you??? "Ann" wrote... | When making HST, can you do it by sewing the 2 strips together, seam down | both sides.....then using your ruler cut on the 45 degree angle, flip ruler, | cut 45 degree again, all the way on your strip?? | | If you needed 2" hst block would you cut your strips 2 1/4"? | Thanks | | Ann --- Outgoing mail is certified Virus Free by AVG. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.507 / Virus Database: 304 - Release Date: 4/08/03 |
#16
|
|||
|
|||
I'm back and will commence rabble rousing tomorrow! Cheers, lynne in Toronto (yer darlin' dotter) ....................................... Butterfly wrote: DORTER!!!!!!!!!! You're back!!!!!!!! been perty quiet wif you'ze not posting love Mom (when ya comin ta help deadhead roses--in time for the fall flush?) Lynne in Toronto wrote: The strip method works great...you get really nice, neat HST's. I use it whenever I have to make multiple HST's using multiple fabrics. There is some waste, but it is worth it to get perfect squares. If you still need advice about how wide to make the strips, I can look it up tonight in Fons and Porter. Cheers, Lynne in Toronto ......................... Ann wrote: Thanks Kathy But if you need a lot of HST the same, does the strip method work or not? Thought I would ask. Will probably play around and experiment with the strip method to get the right size of hst Ann "Ann" wrote in message news:QVwZa.29718$%T.8394@edtnps84... When making HST, can you do it by sewing the 2 strips together, seam down both sides.....then using your ruler cut on the 45 degree angle, flip ruler, cut 45 degree again, all the way on your strip?? If you needed 2" hst block would you cut your strips 2 1/4"? Thanks Ann |
#17
|
|||
|
|||
Lynne, have you made the Barrister Block? I saw the pattern a couple years
ago and knew I had to make it My colours are pink and burgundy.....very subtle pattern. The Thangles are a hst template. Cut at 2 1/2" wide (same width you would cut your strips) with cutting and stitching lines right there for you. They are really slick However, I will probably try the bias strip method when I start the Barrister Block. Maybe this winter when I have more time to work on quilting. Ann "Lynne in Toronto" wrote in message ... Ann, if you are doing a Barrister's Block, please consider using the strip method. I made a basket quilt last year with LOTS of HST's in it, and the strip method saved my bacon! And the answer to your original question is: make the bias strips one inch wider than the finished width of the square...so for your 2" finished sqs you would cut 3" bias strips. I also recommend the Fons and Porter book "Quilter's Complete Guide". It is really quite excellent. Only criticism...the table of contents could be a lot better! Cheers, Lynne in Toronto ................................. Ann wrote: Thanks everyone for your insight!! I was wanting to "mass produce" hst so was curious about the strip method. Then I remebered I had bought a package of Thangles. They were 2" finished size so I worked with those last night. Turned out great. Now if only I was happier with my colour choice. I started doing the tumbling blocks using the hst pattern. I am doing it mainly in purples and the one colour is too dark. However, it's only a lapsize and I wanted to do something in hst before I start on the Barrister Block pattern that I really want to do. So all is not lost. Ann "nzl*" wrote in message ... hi Ann, always add at least 7/8" to the finished size of the hst you need. this will also give you enough for the seam. so for a 2inch hst when its in the quilt, start with 2 7/8" sqs of fabric. two different fabrics back to back, draw diagonal line across and sew a scant 1/4" either side of the line, then cut on the line. press towards the darker fabric. you can start with strips of 2 7/8" wide or bigger sqs/rectangles of an appropriate size. i'm off to find some of the urls i got in my favs folder with pix of some of the various ways. http://www.cottonwoodquilts.com/hst.htm http://ttsw.com/Blocks/TrianglePapers/Triangles.html geez, half the sites i got bookmarked dont exist any longer, how rude!!! hopefully these two, arghhh only two sorry bout that, will show you an easy way for you. by the way if you dont trust your scant 1/4" or just want to err on the side of caution, cut your starting sqs at one full inch bigger than you need. then you can/might have to trim afterwards. hope this all works out for you. good luck, jeanne* -- RCTQ Houston 2004 Party Animals A good friend will come and bail you out of jail.... but, a true friend will be sitting next to you saying, "Damn...that was fun!" i'll be there!!! will you??? "Ann" wrote... | When making HST, can you do it by sewing the 2 strips together, seam down | both sides.....then using your ruler cut on the 45 degree angle, flip ruler, | cut 45 degree again, all the way on your strip?? | | If you needed 2" hst block would you cut your strips 2 1/4"? | Thanks | | Ann --- Outgoing mail is certified Virus Free by AVG. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.507 / Virus Database: 304 - Release Date: 4/08/03 |
#18
|
|||
|
|||
That's the one. I bought the bias-rectangle ruler a few years ago, but the
instructions were missing. I dug out that book and found I already had all the instructions I needed. -- Ruth in Happy Camp "Ocean Gypsy" wrote in message ... In article , "Ruth in Happy Camp" wrote: Thanks for the web site, which I saved as a "favorite." (I just hope it is still there when I need it.) I have a book (title forgotten) with chapters by four (five?) different quiltmakers--Martin is one and her cohort (McSomebody) is another. It covers both this method and the one for bias rectangles. The book I think you're referring to is Quick & Easy Quiltmaking by Mary Hickey, Nancy J. Martin, Marsha McCloskey & Sara Nephew. It's a That Patchwork Place book with 26 projects in it. I've got stickies on 12 of those projects. :-) Looks like a great book - I picked it up at a garage sale and just finished going through it yesterday. It's divided into Bias Squares, bias rectangles, square two and equilateral triangle quilts sections.It looks very thorough in the explanations of the process as well as individual instructions for the projects. Can't wait to try some of them. But first I've got some WIPs going through the hopper now. My "Daft Delft" Ocean Waves WUH just needs the binding finished and a sleeve - a new experience for me, but I saved someone's very logical description (Ragmop, I think) from a while ago and will do that tomorrow. I have a baby quilt that was originally intended for St. Jude's, but due to my slowing down with my foot injury and going away so much this month, it didn't get completed in time for me to hand it in. However, good friends just had a baby 6 weeks ago so it will find a good home there. It's all laid out in a sandwich, waiting to be safety pinned and machine quilted later this afternoon. Crystal, catching up on reading in between gardening and quilting |
#19
|
|||
|
|||
Hullo Mardi
The strips are intended to be cut on the bias themselves. Then the triangles are all right. .. In article , M. Wetmore writes On Sun, 10 Aug 2003 19:20:16 GMT, "Ann" wrote: When making HST, can you do it by sewing the 2 strips together, seam down both sides.....then using your ruler cut on the 45 degree angle, flip ruler, cut 45 degree again, all the way on your strip?? If you needed 2" hst block would you cut your strips 2 1/4"? Thanks Ann The problem with this method would be that all the outside edges of the HST units will be bias edges. Are you sure you want to do that? Mardi Real e-mail address spelled out to prevent spam. mardi at mardiweb dot com. ____________________ My Quilting page: http://www.mardiweb.com/quilts/MardiQuilts.html Paint Shop Pro tutorials: http://www.mardiweb.com/web Low-Fat Lifestyle Forum: http://www.mardiweb.com/lowfat -- Best Regards pat on the hill |
#20
|
|||
|
|||
When I need a lot of the same HST I use Triangles-on-a-Roll. Very easy and no
guess work. (Thangles or Triangle Paper would also work.) If you do the strip method, you should cut bias strips so that the cut edges are straight grain. And for 2" finished squares you need more than 2 1/2" I think................... Pati, in Phx Ann wrote: Thanks Kathy But if you need a lot of HST the same, does the strip method work or not? Thought I would ask. Will probably play around and experiment with the strip method to get the right size of hst Ann "Kathy in CA" wrote in message ... If I am making up my own pattern--for hst cut 2 1/2" sqs; place 2 sqs right side togther; draw line diagonally and sew 1/4" on each side of line and cut in half and press. Each blco should measure 2" if not trim down. Better to have too much than not enough -- Kathy in CA Quilting Stuff: http://photos.yahoo.com/bc/kathys1068 "Ann" wrote in message news:QVwZa.29718$%T.8394@edtnps84... When making HST, can you do it by sewing the 2 strips together, seam down both sides.....then using your ruler cut on the 45 degree angle, flip ruler, cut 45 degree again, all the way on your strip?? If you needed 2" hst block would you cut your strips 2 1/4"? Thanks Ann |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vintage Making Simple Wooden Toys 1945 ending today | Sally | Marketplace | 0 | September 19th 04 01:49 AM |
Few questions about saws, soldering, chain making | Nicki | Jewelry | 4 | August 24th 04 04:44 AM |
Boston Area Jewelry Making classes! Yippee! | lgreene | Beads | 2 | August 11th 04 11:23 PM |
making molds...progress report! | Sjpolyclay | Beads | 10 | July 17th 04 07:59 AM |
woohoo...making progress!! | CNYstitcher | Quilting | 0 | July 30th 03 12:39 PM |