If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Knitting machines?
Okay, I'm sure this topic may have come up in the past, but if it did, I would have skipped it, because I don't have one, and in fact have never even seen one out of the box, and know nothing about them. I will probably go wade through google when I go out to where I have better internet access this week, but in the meantime, I thought I'd ask here. I saw a machine at JoAnn Fabrics the other day. I think it was called "Ultimate Knitting Machine". They didn't have one set up, so all I saw was what was on the box. It was the only brand or kind they had. So from a totally machine-ignorant person to those of you who know them and use them or have used them: Are there major differences between them? What CAN'T you machine knit? Are they only good for straight knitting, or can you do things like alternate knit/purl, cables, etc? Do they require attachments? Are there limits to what kind of yarn you can use? I'm guessing that time it takes to do something is a MAJOR advantage to a machine -- but what other advantages/disadvantages over handknitting are there? Thanks in advance. Karen in MN |
Ads |
#2
|
|||
|
|||
http://www.bond-america.com/help/help_usm_faq.html
This is a page that might answer a lot of your questions. My DM bought me the Incredible sweater machine about 9 years ago back when they had an infomercial for it. I have used it but not in the last 5 years or so. I found that I had to buy extra needle beds to extend the amount of stitches. I also found that a stitch counter was very helpful in keeping track. I also pruchased a special table for it because the clamp was marking up my dining room table. I have done fair isle and intarsia with it. Things came out nice. I don't hand knit, though, so a comparison is hard for me to say. One thing that I did not like was the lack of patterns at that time. I could not easily convert a hand knit pattern to the machine. But that was the only drawback. Seaspray |
#3
|
|||
|
|||
In article , "seaspray" seaside
stitcher @ Yahoo. com wrote: http://www.bond-america.com/help/help_usm_faq.html This is a page that might answer a lot of your questions. My DM bought me the Incredible sweater machine about 9 years ago back when they had an infomercial for it. I have used it but not in the last 5 years or so. I found that I had to buy extra needle beds to extend the amount of stitches. I also found that a stitch counter was very helpful in keeping track. I also pruchased a special table for it because the clamp was marking up my dining room table. I have done fair isle and intarsia with it. Things came out nice. I don't hand knit, though, so a comparison is hard for me to say. One thing that I did not like was the lack of patterns at that time. I could not easily convert a hand knit pattern to the machine. But that was the only drawback. Seaspray Helen is the person to talk to she uses her knitting machines a lot. I do have a machine, but I do not use it a lot, only for the odd item that can be knitted quickly. Mine is a Brother. I can change the knitting set up by exchanging the divider beds. ( between the knitting needles) One is for regular knitting the other for bulky. I find it a nice machine, and I even knitted on the bulky setting a loosly knitted bag from heavy yarn for felting. It worked very well. When the kids were small I had a Knitking and it had a fine setting only. I knitted many sweaters, scarves and caps. Once the kids were bigger, my mother in law did all the knitting for the girls. I gave the Knitking away to a friend. Karen if you are interested in getting a machine, go and look at the major brands and let someone give you a demo, so you understand what you are looking at. Try it out and see if you like knitting on a machine. They are dear to buy. I do know that we have a knitting machine group here, so maybe you may find a Guild as well in your location. That would also be a very good place to go and visit and learn all about it. Els -- I have added a trap for spammers......niet..... |
#4
|
|||
|
|||
On Sun, 14 Dec 2003 12:34:03 -0600, Karen MN wrote:
Okay, I'm sure this topic may have come up in the past, but if it did, I would have skipped it, because I don't have one, and in fact have never even seen one out of the box, and know nothing about them. I will probably go wade through google when I go out to where I have better internet access this week, but in the meantime, I thought I'd ask here. I saw a machine at JoAnn Fabrics the other day. I think it was called "Ultimate Knitting Machine". They didn't have one set up, so all I saw was what was on the box. It was the only brand or kind they had. So from a totally machine-ignorant person to those of you who know them and use them or have used them: Are there major differences between them? What CAN'T you machine knit? Are they only good for straight knitting, or can you do things like alternate knit/purl, cables, etc? Do they require attachments? Are there limits to what kind of yarn you can use? I'm guessing that time it takes to do something is a MAJOR advantage to a machine -- but what other advantages/disadvantages over handknitting are there? Thanks in advance. Karen in MN Karen, I'm going to discuss this with you off-list, as I have loads to say! Hugs, Noreen who HAD a Bond, and got rid of it for my Artisan..... -- STRIP * tease * to email me. |
#6
|
|||
|
|||
Speaking of knitting machines, is there a way to convert a pattern from
"knitting machine" to "hand knit?" Janise "Helen "Halla" Fleischer" wrote in message ... | On Sun, 14 Dec 2003 16:03:35 -0800, (Els van Dam) wrote: In article , "seaspray" seaside stitcher @ Yahoo. com wrote: http://www.bond-america.com/help/help_usm_faq.html This is a page that might answer a lot of your questions. Good advice, Seaspray. Helen is the person to talk to she uses her knitting machines a lot. Oddly enough, no. I don't know diddly about the Bond machines. I have never knitted on a plastic bed machine of any sort. I do have a machine, but I do not use it a lot, only for the odd item that can be knitted quickly. Mine is a Brother. I can change the knitting set up by exchanging the divider beds. ( between the knitting needles) One is for regular knitting the other for bulky. I find it a nice machine, and I even knitted on the bulky setting a loosly knitted bag from heavy yarn for felting. It worked very well. Ooh, I've heard about that one but never used it. I have a couple of flat bed machines that I use regularly; a Brother standard gauge and a Knitking Bulky gauge -- both with punch card patterning and ribbers. Karen if you are interested in getting a machine, go and look at the major brands and let someone give you a demo, so you understand what you are looking at. Try it out and see if you like knitting on a machine. They are dear to buy. I do know that we have a knitting machine group here, so maybe you may find a Guild as well in your location. That would also be a very good place to go and visit and learn all about it. More excellent advice. I learned so much from the guild I belonged to. I only wish that it wasn't such a nightmare drive round the DC beltway in rush hour to get it. I had to quit going because of that drive. Helen "Halla" Fleischer, Fantasy & Fiber Artist in Fairland, MD USA http://home.covad.net/~drgandalf/halla/ |
#7
|
|||
|
|||
go to this site
http://www.cara4webshopping.com/cara_free/convert.htm good luck.Stella "Janise Ross" wrote in message ... Speaking of knitting machines, is there a way to convert a pattern from "knitting machine" to "hand knit?" Janise "Helen "Halla" Fleischer" wrote in message ... | On Sun, 14 Dec 2003 16:03:35 -0800, (Els van Dam) wrote: In article , "seaspray" seaside stitcher @ Yahoo. com wrote: http://www.bond-america.com/help/help_usm_faq.html This is a page that might answer a lot of your questions. Good advice, Seaspray. Helen is the person to talk to she uses her knitting machines a lot. Oddly enough, no. I don't know diddly about the Bond machines. I have never knitted on a plastic bed machine of any sort. I do have a machine, but I do not use it a lot, only for the odd item that can be knitted quickly. Mine is a Brother. I can change the knitting set up by exchanging the divider beds. ( between the knitting needles) One is for regular knitting the other for bulky. I find it a nice machine, and I even knitted on the bulky setting a loosly knitted bag from heavy yarn for felting. It worked very well. Ooh, I've heard about that one but never used it. I have a couple of flat bed machines that I use regularly; a Brother standard gauge and a Knitking Bulky gauge -- both with punch card patterning and ribbers. Karen if you are interested in getting a machine, go and look at the major brands and let someone give you a demo, so you understand what you are looking at. Try it out and see if you like knitting on a machine. They are dear to buy. I do know that we have a knitting machine group here, so maybe you may find a Guild as well in your location. That would also be a very good place to go and visit and learn all about it. More excellent advice. I learned so much from the guild I belonged to. I only wish that it wasn't such a nightmare drive round the DC beltway in rush hour to get it. I had to quit going because of that drive. Helen "Halla" Fleischer, Fantasy & Fiber Artist in Fairland, MD USA http://home.covad.net/~drgandalf/halla/ |
#8
|
|||
|
|||
here is another site
http://www.knitting-crochet.com/exchange/ Good luck.Stella "Janise Ross" wrote in message ... Speaking of knitting machines, is there a way to convert a pattern from "knitting machine" to "hand knit?" Janise "Helen "Halla" Fleischer" wrote in message ... | On Sun, 14 Dec 2003 16:03:35 -0800, (Els van Dam) wrote: In article , "seaspray" seaside stitcher @ Yahoo. com wrote: http://www.bond-america.com/help/help_usm_faq.html This is a page that might answer a lot of your questions. Good advice, Seaspray. Helen is the person to talk to she uses her knitting machines a lot. Oddly enough, no. I don't know diddly about the Bond machines. I have never knitted on a plastic bed machine of any sort. I do have a machine, but I do not use it a lot, only for the odd item that can be knitted quickly. Mine is a Brother. I can change the knitting set up by exchanging the divider beds. ( between the knitting needles) One is for regular knitting the other for bulky. I find it a nice machine, and I even knitted on the bulky setting a loosly knitted bag from heavy yarn for felting. It worked very well. Ooh, I've heard about that one but never used it. I have a couple of flat bed machines that I use regularly; a Brother standard gauge and a Knitking Bulky gauge -- both with punch card patterning and ribbers. Karen if you are interested in getting a machine, go and look at the major brands and let someone give you a demo, so you understand what you are looking at. Try it out and see if you like knitting on a machine. They are dear to buy. I do know that we have a knitting machine group here, so maybe you may find a Guild as well in your location. That would also be a very good place to go and visit and learn all about it. More excellent advice. I learned so much from the guild I belonged to. I only wish that it wasn't such a nightmare drive round the DC beltway in rush hour to get it. I had to quit going because of that drive. Helen "Halla" Fleischer, Fantasy & Fiber Artist in Fairland, MD USA http://home.covad.net/~drgandalf/halla/ |
#9
|
|||
|
|||
Karen,
I have only 3 knitting machines (working on getting a 4th)!!! Mine have all been Empisal/Knitmaster/Silver Reed - since 1970 I could not LIVE without them!!!!! Knitting machines stay with you longer than kids (and they don't back-chat). The ONLY drawback I have found is making tiny thinks like baby bootees. Because they are so small it is quicker to knit by hand. Oh - one other drawback - you can't use them on a train or plane!! But I find that if I take pencil and paper around with me, there is always someone wearing something that I can "secretly draw now & knit when I get back home". OK, so it may not be identical but it will be UNIQUE. Take a look at my wedding dress on Martin's site. My motto is:- "if you can draw it - I can knit it". Shape, stitch pattern, yarn type/thickness. I have attachments galore that didn't cost much and added endless possibilities to the things that my Babies can do! I better stop now - before you have proof that I am INSANELY in love with my Machines. -- Kari (in the UK) SpamTrap: I will have "no spam" emailed to me! "Karen MN" wrote in message ... Okay, I'm sure this topic may have come up in the past, but if it did, I would have skipped it, because I don't have one, and in fact have never even seen one out of the box, and know nothing about them. I will probably go wade through google when I go out to where I have better internet access this week, but in the meantime, I thought I'd ask here. I saw a machine at JoAnn Fabrics the other day. I think it was called "Ultimate Knitting Machine". They didn't have one set up, so all I saw was what was on the box. It was the only brand or kind they had. So from a totally machine-ignorant person to those of you who know them and use them or have used them: Are there major differences between them? What CAN'T you machine knit? Are they only good for straight knitting, or can you do things like alternate knit/purl, cables, etc? Do they require attachments? Are there limits to what kind of yarn you can use? I'm guessing that time it takes to do something is a MAJOR advantage to a machine -- but what other advantages/disadvantages over handknitting are there? Thanks in advance. Karen in MN |
#10
|
|||
|
|||
| On Tue, 16 Dec 2003 06:10:21 -0000, "Kari" wrote:
I could not LIVE without them!!!!! Knitting machines stay with you longer than kids (and they don't back-chat). Yet, I could have sworn my first CSM was snickering at me during the learning curve/breaking in period. None of my flat bed machines have been that cranky, though. Well, maybe the Studio fine gauge that convinced me I'd need serious bifocal help to knit with it. One thinks standard gauge is mighty fine until one deals with one of those puppies. It still sits there going neener-neener at me. Helen "Halla" Fleischer, Fantasy & Fiber Artist in Fairland, MD USA http://home.covad.net/~drgandalf/halla/ |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
knitting machines | ToniB | Machine Knit | 2 | March 8th 04 04:54 PM |
My Book Report for Cactus Needles Knitting Guild!!! | Slick Hippy chick | Yarn | 2 | November 21st 03 09:23 PM |
Great Tapestry Knitting Bags and Knitting Needle Cases | Accessories by Bettz Designs | Marketplace | 0 | November 2nd 03 02:58 AM |
Knitting Machines For Sale | Keetza | Machine Knit | 0 | October 15th 03 02:41 PM |