If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Curious about Jade appraisal
Recently visited China (Canton, or Guangzhou) and got pressured into
buying two jade bangles. The short story is that I wanted to buy some Jade, and wanted the two bangles to be cut from the same stone; one for me and one for a certain other person. I am somewhat naive and expected US prices of $100 or so each, but was surprised when I had to negotiate for over two hours to get two bangles for almost 3700RMB (about $520) and a smallish "gold happiness jade" charm. I was drawn to the pieces because they clearly are "twins" and they are whitish with flecks of green. They also have "purple" shadows when held up to the light; supposedly that is very good and the sales person used terms like "mature" and "smooth" to sell the virtues of these pieces. I am almost certain I was ripped off although the pieces are supposedly "A" grade, I supposedly have a guarantee (in Chinese, not even sure what it says), and the dealer is supposedly very respectable. How do I find out if these two are worth anything even close to what I paid? I assumed that buying Jade directly in China would give me steep discounts; if I paid 3700RMB in China, does that really mean these two are worth, say, over $2000 back here in the states? I highly doubt it, I wouldn't buy these for anything like that. Clearly I'm no expert, however. Even if they appraise for close to the price I paid in China that would be OK, but again, I highly doubt it as I see bangles for $100 and much much less. How can I get a fair appraisal, more for curiosity and learning than anything else? |
Ads |
#2
|
|||
|
|||
Curious about Jade appraisal
|
#3
|
|||
|
|||
Curious about Jade appraisal
On Mar 2, 3:32 am, "Peter W.. Rowe,"
wrote: On Sun, 02 Mar 2008 03:04:19 -0800, in rec.crafts.jewelry wrote: How do I find out if these two are worth anything even close to what I paid? I assumed that buying Jade directly in China would give me steep discounts; why would you assume you'd get steep discounts on jade, in the country where it is valued higher than almost anywhere else in the world? In the U.S., and much of the rest of the western world where you can buy jade, the majority of buyers are not all that picky. If it's pretty, they're happy, which is why so much of the jade sold here is cheap junk, either low quality, or outright dyed, or just not actually jade. In China, while the cheap stuff is still available, it's You've made some excellent points that I hadn't thought through properly. These aren't like the shoes we were buying for 40RMB (US $5.50) which sell here for US$90. There's no "real" Jade market in the US that I'm aware of, unlike the shoes. Secondly, you're right, this was a retail establishment in the "real" consumer market of Jade, not wholesale, which seems obvious now, but needed your insight to help me figure out. I suppose I shouldn't have spent so much if I didn't realise the value of what I was purchasing. On the other hand, every time I appreciate and admire my and my other's bangles, I do get a better feeling for Jade; and also asking questions like this and reading this and other articles has helped deepen my knowledge. I'm sure I'll enjoy these pieces for a very long time and I'm now pretty sure I paid a fair price for some good Jade, probably better than I would have gotten here in the states, even though it's not as much as I would have spent (former implies the latter). And I probably would have missed out. I wasn't buying it for an investment or to flip it, after all. Incidentally, the dealer did tell me about the "Burma" Jade and supposedly this is Burma Jade, A-grade stuff. I don't know about nephrite and jadeite, etc., his English wasn't perfect, obviously. It's white, as I said, with green flakes, purple shadows and the more I wear it, the more I like it. Thanks! |
#4
|
|||
|
|||
Curious about Jade appraisal
On Mar 5, 3:58 pm, wrote:
Incidentally, the dealer did tell me about the "Burma" Jade and supposedly this is Burma Jade, A-grade stuff. I don't know about nephrite and jadeite, etc., his English wasn't perfect, obviously. It's white, as I said, with green flakes, purple shadows and the more I wear it, the more I like it. From your description it's clearly jadeite and not nephrite. And thanks to Peter for the elaborations, I think I bought the right material beads, going for jadeite rather than nephrite. Maren HiloBeads: Beads - Beading Supplies - Hand-made Jewelry http://www.hilobeads.com/ (yes, I know, I shouldn't call that jewelry here, I'm just a bead person) |
#5
|
|||
|
|||
Curious about Jade appraisal
On Thu, 06 Mar 2008 20:50:11 -0800, in rec.crafts.jewelry Maren at google
wrote: On Mar 5, 3:58 pm, wrote: Incidentally, the dealer did tell me about the "Burma" Jade and supposedly this is Burma Jade, A-grade stuff. I don't know about nephrite and jadeite, etc., his English wasn't perfect, obviously. It's white, as I said, with green flakes, purple shadows and the more I wear it, the more I like it. From your description it's clearly jadeite and not nephrite. And thanks to Peter for the elaborations, I think I bought the right material beads, going for jadeite rather than nephrite. Neither is right or wrong, they each have their respective strengths. Nephrite, for example, is less "crystaline" looking, and for some uses, that's nice. Also the usually much lower price makes it attractive in some instances. It's also tougher and harder to break, though both types of jade (nephrite or jadeite) are quite tough as far as gem materials go. Jadeite is of course, the more highly valued in it's finest qualites, but as I say, for some uses, nephrite may be the preferred choice. Which is right, depends on your use and tastes. Maren HiloBeads: Beads - Beading Supplies - Hand-made Jewelry http://www.hilobeads.com/ (yes, I know, I shouldn't call that jewelry here, I'm just a bead person) If it's jewelry, call it so. Jewelry does not mean it must be metal. I'm writing this now from the annual meeting of the Society of North American Goldsmiths (SNAG). Lots of wonderfully creative jewelers here. I had dinner with, among others, a nice lady who, in her midlife age range, went back to school learned jewelry making, and is now just finishing up her well deserved Masters degree. None of the wonderful jewelry she was wearing was made of metal. Paper, bone, porcelain, and other things, but little if any metal. Another lady at the table showed off an absolutely stunning and sumptuous necklace made of fabric, to which she'd stiched some 60 thousand seed beeds. An amazing piece of work, which she says took her over 200 hours. Again, no metal, mostly bead work, and clearly deserving of the term jewelry. Jewelry is jewelry. Whether its metal or some other material, the key to whether it deserves respect for it's craftsmanship, and/or for it's aesthetics and are, are not dependent on the material, but rather how, and how well, those materials have been used. There are people who, never having had any art training (either self taught or in school), who see some cute bracelets at some cheap crafts fair, and figure, correctly, that they could do that. So the buy some beads and string up their own, are proud of themselves and think they've made art. Sometimes, rarely, they have. Usually they've just copied someone elses work. Still, this is a start. with practice, they can get creative, and explore the material. If they get past the stage of doing things they've already seen elsewhere, and start doing their own explorations with a material, and explore pushing it in directions that may be new to them or better, new to the material in general, then that creative effort can well deserve the respect as, and the term, fine art. Doesn't matter if it's beads, or silver, or paper mache. These are just the "paint". It's the picture and the creative thought and work that determine it's worthyness and identity. This group, while mostly a tradition of metalworkers, welcomes discussion about jewelry making itself, both the craft skills and craft level, and the fine art level of working. Those who are just beginning are encouraged to keep at it, keep exploring, keep learning. Now, it's true that bead workers don't spend as much time here. That's mostly because there are several other newsgroups spec ifically devoted to bead work. And this group has some members who have occasionall shown little patience with people who find a new hobby doing some very simple beading projects that amount to little more that basic hobby crafting with little skill or creativity, but who are now convined that their new website selling their simple things will bring the world to their door and the dollars to follow, with acclaim as artists closely behind. Understandably, some people are unkind to such grandiose expectations, as they tend to discount and degrade the higher levels of experience and excellence that many professional and serious amateurs try to achieve. But even if you're a beginner, if your work is sincere, your desire to learn and advance also real, you'll find plenty of people to welcome you. No apologies needed. cheers Peter |
#6
|
|||
|
|||
OT, thanks to Peter. was: Curious about Jade appraisal
First of all, thanks for taking the time for such a long and nice
reply. I'm one of the more-or-less regulars on rec.craft.beads and I come here to learn other stuff. I just felt that my .sig is almost inappropriate for this newsgroup :-) (comments in text) On Mar 6, 7:14 pm, "Peter W.. Rowe," wrote: On Thu, 06 Mar 2008 20:50:11 -0800, in rec.crafts.jewelry Maren at google wrote: On Mar 5, 3:58 pm, wrote: And thanks to Peter for the elaborations, I think I bought the right material beads, going for jadeite rather than nephrite. Neither is right or wrong, they each have their respective strengths. Nephrite, for example, is less "crystaline" looking, and for some uses, that's nice. Also the usually much lower price makes it attractive in some instances. It's also tougher and harder to break, though both types of jade (nephrite or jadeite) are quite tough as far as gem materials go. Jadeite is of course, the more highly valued in it's finest qualites, but as I say, for some uses, nephrite may be the preferred choice. Which is right, depends on your use and tastes. Most of the bangles and carved things I see here are nephrite. I'm not a carver, and other than beads and wire and such things I don't resell stuff (I have recently turned into a bit of a bead store, but mostly to supply myself and other people locally with things that either can't be found here or are very expensive, before that I wasn't reselling anything, and I probably wouldn't have gotten into buying as much jadeite as I did). To me jadeite has more character, and being tougher is more appropriate to what I make. (it almost hurts to cut what Peter wrote, but for brevity I'm just going to keep what I'm commenting on) If it's jewelry, call it so. Well, it is and it isn't. A lot of it is farmers market stuff for tourists. Locally made in Hawaii, and, I admit that I actually like most of it. Jewelry is jewelry. Whether its metal or some other material, the key to whether it deserves respect for it's craftsmanship, and/or for it's aesthetics and are, are not dependent on the material, but rather how, and how well, those materials have been used. There are people who, never having had any art training (either self taught or in school), who see some cute bracelets at some cheap crafts fair, and figure, correctly, that they could do that. I run into that a lot. My craftsmanship isn't great, my manual dexterity isn't great and I probably need new glasses (but just for that, and with a full time job and being able to read both paper and computer it hasn't hit the priority list yet). A lot of people think they can make what I make, and then there's the remarks on the other side "Did you make that? That's gorgeous" - people at work know I make things and wear the things I make. It's the picture and the creative thought and work that determine it's worthyness and identity. I have a bead customer who makes really unique things. Yet, I think it's a matter of taste, I'd rather wear mine than hers any time. Those who are just beginning are encouraged to keep at it, keep exploring, keep learning. Thank you Peter, and that's why I come here. And this group has some members who have occasionally shown little patience with people who find a new hobby doing some very simple beading projects that amount And some of those people are very very good. If somebody can't see past the very little patience they might as well not be here. But even if you're a beginner, if your work is sincere, your desire to learn and advance also real, you'll find plenty of people to welcome you. No apologies needed. Thanks again, Aloha, Maren (posting this rather than replying by email, because this isn't just to Peter) |
#7
|
|||
|
|||
Curious about Jade appraisal
Hi,
I have a wonderful Jade Jar that I inherited from my father. It is complete with lid, and has hand carved rings that are carved out of the original body. My father was in the merchant marine for 40 years and he picked up a lot of things from overseas like this. He also picked up trees made of jade and pocke****ches made of silver that say "siam" on the bodies... This "vessel" is really the nicest thing I own... It's one solid piece, except for the lid, and there's these rings that are free hanging that are carved out of the side of the vessel... Unfortunately,in this age of 10.2% unemployment, I'm looking to findout how much I can get for things like this. I have easy access to San Francisco and Salt Lake City, do you have any leads on peope that can give me an HONEST appraisal of my items? Thanks, Pete |
#8
|
|||
|
|||
with modern tools and methods, yes. Doing it with starting raw materials and
tools available to the 7th century byzantine goldsmith might be a bit more daunting. A ring like that, for example, likely was not cast, so one would need to have some skill with chisels or engraving tools to do the carving, and the steel back then wasn't as good, not to mention the fact that the goldsmith would have had to make his own tools beforehand. Remember, files for shaping metal were not yet available either. Most forming would be with hammers... And you couldn't just go to your metals dealer and buy ready to use sheet or wire... Also, the niello (black) inlay isn't quite as simple to do as might seem, especially with ancient technologies. Doable? certainly. But I think I'd take the word "very" out from your sentance... |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Textile Appraisal | missmaddies | Marketplace | 0 | February 23rd 05 03:13 PM |
Ring Appraisal | Cobalt | Jewelry | 1 | July 12th 04 03:56 AM |
best place for appraisal? | Bob Devine | Jewelry | 1 | December 22nd 03 04:00 PM |
Honest appraisal | Jim McLaughlin | Carving | 0 | August 28th 03 03:07 AM |
Just curious | Ophelia | Yarn | 4 | August 14th 03 04:15 AM |