If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
OT sort of but sewing question rugs
OK, about a year ago, maybe longer I bought a woollen floor rug at a
charity sale. The edge binding is worn in places, so needs covering. Today I found bargain bias binding for 60 cts for 5 metres instead of 2 euros, so have bought loads! OK, what I thought was, if I use this to re-bind the edge I could use it double thickness, to give it a bit of strength. How would you do this? Would you (a) sew 2 thicknesses on at the same time or (b) go around twice? It is 3 yds x 2 yds. I think probably (a), but when I come to join in a new length of bias, would it be better that I have one joining seam that goes through both layers or join each layer separately and smooth down. It is a lovely rug and there was no way that I could afford to buy a new one, so make do and mend. We have parquet floors which are lovely in the summer, but a bit cool in the winter. Also, does anyone know of anyone that still makes or sells linoleum mats to go in front of fireplaces? Ours is ancient, but real linoleum, not plastic, so is naturally fireproof so if any sparks fall out we shouldn't be in trouble. Thanks Janner France |
Ads |
#3
|
|||
|
|||
OT sort of but sewing question rugs
"Janner" wrote in message ( Snip) Also, does anyone know of anyone that still makes or sells linoleum mats to go in front of fireplaces? Ours is ancient, but real linoleum, not plastic, so is naturally fireproof so if any sparks fall out we shouldn't be in trouble. Thanks Janner France Think maybe you might find a fireplace screen to go in front of the fireplace to prevent sparks from flying onto you floor? Over here I sometimes see them at a thrift store or a yard sale? Sometimes the household catalogs will have the linoleum to go on the floor in front of the fireplace. That's all I can think of. Maybe they would be at a farm type store? Good luck with both projects. Barbara in SC |
#4
|
|||
|
|||
OT sort of but sewing question rugs
I would think to join ends as for a quilt binding, and then stagger the
joins, before sewing them down at the same time. I might even consider fusing the layers together before sewing them down. So far as the linoleum, I looked around the last time we had to replace the vinyl junk our landlord puts down. The guy at the flooring store said he could get some from a Dutch company called Forbo, but it would cost the earth. He suggested I think about asphalt flooring. This Forbo company might be a starting place for you anyway. Aren't you glad my purse in a bag of holding that I don't clean out nearly often enough? LOL! Me, I would price stone tiles. Granite or marble looks fine in front of a fireplace, and you probably would not need more than half a dozen or so depending on how big your fire place is. Last time I was at the closeout building supplies store, you could get 10, 1 square foot, black granite tiles for US$10. I grant you don't find a price like that every day, but they are not all that much more expensive bought at the regular store, at least that is so here. Sometimes if you go in on the right day you can get thin slabs of nice looking stone at a good price from places that make gravestones. It is scrap for them, and often they will polish it for you for a nominal price. Might be worth looking into if you want to go the stone route. NightMist On Thu, 29 Aug 2013 19:41:09 +0200, Janner wrote: OK, about a year ago, maybe longer I bought a woollen floor rug at a charity sale. The edge binding is worn in places, so needs covering. Today I found bargain bias binding for 60 cts for 5 metres instead of 2 euros, so have bought loads! OK, what I thought was, if I use this to re-bind the edge I could use it double thickness, to give it a bit of strength. How would you do this? Would you (a) sew 2 thicknesses on at the same time or (b) go around twice? It is 3 yds x 2 yds. I think probably (a), but when I come to join in a new length of bias, would it be better that I have one joining seam that goes through both layers or join each layer separately and smooth down. It is a lovely rug and there was no way that I could afford to buy a new one, so make do and mend. We have parquet floors which are lovely in the summer, but a bit cool in the winter. Also, does anyone know of anyone that still makes or sells linoleum mats to go in front of fireplaces? Ours is ancient, but real linoleum, not plastic, so is naturally fireproof so if any sparks fall out we shouldn't be in trouble. Thanks Janner France -- I'm raising a developmentally disabled child. What's your superpower? |
#5
|
|||
|
|||
OT sort of but sewing question rugs
Interesting....I put Forbo into our kitchen (love it by the way) and it
was far less expensive than carrying the wood flooring into the kitchen or doing the tile floor the contractor recommended. marcella In article , NightMist wrote: I would think to join ends as for a quilt binding, and then stagger the joins, before sewing them down at the same time. I might even consider fusing the layers together before sewing them down. So far as the linoleum, I looked around the last time we had to replace the vinyl junk our landlord puts down. The guy at the flooring store said he could get some from a Dutch company called Forbo, but it would cost the earth. He suggested I think about asphalt flooring. This Forbo company might be a starting place for you anyway. Aren't you glad my purse in a bag of holding that I don't clean out nearly often enough? LOL! Me, I would price stone tiles. Granite or marble looks fine in front of a fireplace, and you probably would not need more than half a dozen or so depending on how big your fire place is. Last time I was at the closeout building supplies store, you could get 10, 1 square foot, black granite tiles for US$10. I grant you don't find a price like that every day, but they are not all that much more expensive bought at the regular store, at least that is so here. Sometimes if you go in on the right day you can get thin slabs of nice looking stone at a good price from places that make gravestones. It is scrap for them, and often they will polish it for you for a nominal price. Might be worth looking into if you want to go the stone route. NightMist On Thu, 29 Aug 2013 19:41:09 +0200, Janner wrote: OK, about a year ago, maybe longer I bought a woollen floor rug at a charity sale. The edge binding is worn in places, so needs covering. Today I found bargain bias binding for 60 cts for 5 metres instead of 2 euros, so have bought loads! OK, what I thought was, if I use this to re-bind the edge I could use it double thickness, to give it a bit of strength. How would you do this? Would you (a) sew 2 thicknesses on at the same time or (b) go around twice? It is 3 yds x 2 yds. I think probably (a), but when I come to join in a new length of bias, would it be better that I have one joining seam that goes through both layers or join each layer separately and smooth down. It is a lovely rug and there was no way that I could afford to buy a new one, so make do and mend. We have parquet floors which are lovely in the summer, but a bit cool in the winter. Also, does anyone know of anyone that still makes or sells linoleum mats to go in front of fireplaces? Ours is ancient, but real linoleum, not plastic, so is naturally fireproof so if any sparks fall out we shouldn't be in trouble. Thanks Janner France |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I'm just a bit excited...... sorta Off Topic, but about sewing...sort of. | Pati C. | Quilting | 21 | May 5th 08 06:55 PM |
sort of a newbie with a question | Jean Early | Yarn | 27 | May 19th 04 11:42 PM |
Question (sort of ON topic) | Sindir | Quilting | 5 | May 6th 04 02:16 AM |
Question (sort of AD) | Kandice Seeber | Beads | 8 | February 21st 04 01:02 AM |
Direct source for handmade Needlepoint rugs, Aubusson rugs and Tapestries | Eli Tcha | Needlework | 0 | October 3rd 03 08:29 AM |