If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
High-loft Poly batting! Argh!
Oh wow, it's getting late.... I'm gonna be fun getting up with the kids
for their first day back at school from Winter break. ;-) My mom gave me a package of this batting (Polyfil brand, 81"x96") for Christmas. Great, sez I, because DH wanted me to make him a quilt because his blanket is on its last legs, and he said he wanted puffy...I'll use it for him. This stuff is awful! It's all wrinkly and sorta lumpy in spots next to thin spots, and I can't seem to smooth it out. Eventually, I did a half-assed job of pinning it in the center, and then wrestled with it for a half hour to work it under the foot of my machine for some freehand quilting. The quilting was awful. Skipped stitches and huge difficulty maneuvering the fabric around because so much of it was jammed under the arm... it's all getting ripped out in the morning. So I know that I should pin it or baste it better. How do I do that if I don't have the floorspace to lay it out (and outside isn't an option)? I do have a folding table that I use for my SM and iron... it's about 2 1/2' x 6' but can't figure a way to use that for pinning. And once I get the quilt pinned (or basted if I must, but I really prefer pinning) better, how do I machine quilt it? How do I get it to *move* with the stitches once I've got so much squeezed under the arm of the machine? I rolled it into a tube-shape, but that still didn't work well. And should I just give up on freeform quilting (which I've become addicted to) and stick with a basic grid? I really want to get this done by the 14th, which is DH's birthday! Cina, staggering bleary-eyed off to bed (who reallyreallyreally likes W&N cotton batting and has to figure some subtle way to point it out to my mom) |
Ads |
#2
|
|||
|
|||
I feel your pain. I really do...btdt! I finally got all the poly batting out of my
house, or at least shredded up so i can use it to make my own pillow forms. It is nearly impossible to freemotion quilt on higher loft batting...at least for me. How disappointed you must be. I would probably go ahead and quilt it in a grid as you suggest, or in the ditch. As for mom, invite her over and have her watch you struggle with the batting...LOL. Then when she asks about it, tell her that Warm N Natural is great for machine quilting, and you can do so much more with it. She'll get the hint, i'm sure...my mom did. They're well intentioned, but sometimes people just don't get it. Hugs to you, and good luck -- Jalynne - Keeper of the Quilt for ME club list Queen Gypsy (snail mail available upon request) see what i've been up to at www.100megsfree4.com/jalynne "Cina" wrote in message ... Oh wow, it's getting late.... I'm gonna be fun getting up with the kids for their first day back at school from Winter break. ;-) My mom gave me a package of this batting (Polyfil brand, 81"x96") for Christmas. Great, sez I, because DH wanted me to make him a quilt because his blanket is on its last legs, and he said he wanted puffy...I'll use it for him. This stuff is awful! It's all wrinkly and sorta lumpy in spots next to thin spots, and I can't seem to smooth it out. Eventually, I did a half-assed job of pinning it in the center, and then wrestled with it for a half hour to work it under the foot of my machine for some freehand quilting. The quilting was awful. Skipped stitches and huge difficulty maneuvering the fabric around because so much of it was jammed under the arm... it's all getting ripped out in the morning. So I know that I should pin it or baste it better. How do I do that if I don't have the floorspace to lay it out (and outside isn't an option)? I do have a folding table that I use for my SM and iron... it's about 2 1/2' x 6' but can't figure a way to use that for pinning. And once I get the quilt pinned (or basted if I must, but I really prefer pinning) better, how do I machine quilt it? How do I get it to *move* with the stitches once I've got so much squeezed under the arm of the machine? I rolled it into a tube-shape, but that still didn't work well. And should I just give up on freeform quilting (which I've become addicted to) and stick with a basic grid? I really want to get this done by the 14th, which is DH's birthday! Cina, staggering bleary-eyed off to bed (who reallyreallyreally likes W&N cotton batting and has to figure some subtle way to point it out to my mom) |
#3
|
|||
|
|||
Cina wrote:
Oh wow, it's getting late.... I'm gonna be fun getting up with the kids for their first day back at school from Winter break. ;-) My mom gave me a package of this batting (Polyfil brand, 81"x96") for Christmas. Great, sez I, because DH wanted me to make him a quilt because his blanket is on its last legs, and he said he wanted puffy...I'll use it for him. What high loft poly batting is best for is tied quilts. This also leaves them nice and puffy. I have used it for the t-shirt quilt that I made for my friend. It simply is a nightmare to quilt by hand or by machine, unless you like doing the one stitch at a time method. I can quilt anything if I pull through every time I insert the needle into the fabric, but it's SLOW. As for a good place to lay out the quilt and baste, have you tried asking your LQS when is a good time for you to borrow the classroom and its tables? Sometimes the local school will let you use the cafeteria. Who else do you know with large tables- perhaps your church. I'm lucky- my kitchen floor is big enough to baste on, and my mother has offered to let me use her quilting frame to baste on. Her quilting frame is simply to large to actually use every day. -georg |
#4
|
|||
|
|||
|
#5
|
|||
|
|||
Cina, if you are going to remove the batting from your quilt, let's just put
it away. Smash it in a plastic bag and squash it way up high in a closet.If you don't have a closet, put it in the trunk of the car. No car? Put it in somebody else's trunk. One day when you have the wild urge to make decorator pillows for the bed or sofa (or dog), you can use the batting for stuffing. They say you pick your battles. This is not a worthwhile battle to pick. I did make a biscuit quilt with a high-loft batt. You just tear off small handfuls and puff up the biscuits. Maybe the kids will want to help. Polly "georg" wrote in message ... Cina wrote: Oh wow, it's getting late.... I'm gonna be fun getting up with the kids for their first day back at school from Winter break. ;-) My mom gave me a package of this batting (Polyfil brand, 81"x96") for Christmas. Great, sez I, because DH wanted me to make him a quilt because his blanket is on its last legs, and he said he wanted puffy...I'll use it for him. What high loft poly batting is best for is tied quilts. This also leaves them nice and puffy. I have used it for the t-shirt quilt that I made for my friend. It simply is a nightmare to quilt by hand or by machine, unless you like doing the one stitch at a time method. I can quilt anything if I pull through every time I insert the needle into the fabric, but it's SLOW. As for a good place to lay out the quilt and baste, have you tried asking your LQS when is a good time for you to borrow the classroom and its tables? Sometimes the local school will let you use the cafeteria. Who else do you know with large tables- perhaps your church. I'm lucky- my kitchen floor is big enough to baste on, and my mother has offered to let me use her quilting frame to baste on. Her quilting frame is simply to large to actually use every day. -georg |
#6
|
|||
|
|||
Cina,
My daughter also wanted a puffy quilt instead of a flat one so I used extra high loft poly batt for hers. I feel your pain because I swore I would NEVER use that again! I had all the problems that you are having. I ended up just putting hand tack marks every 6 inches or so. I couldn't even do that by machine... I will never use high loft poly batt again... Cina wrote in message ... Oh wow, it's getting late.... I'm gonna be fun getting up with the kids for their first day back at school from Winter break. ;-) My mom gave me a package of this batting (Polyfil brand, 81"x96") for Christmas. Great, sez I, because DH wanted me to make him a quilt because his blanket is on its last legs, and he said he wanted puffy...I'll use it for him. This stuff is awful! It's all wrinkly and sorta lumpy in spots next to thin spots, and I can't seem to smooth it out. Eventually, I did a half-assed job of pinning it in the center, and then wrestled with it for a half hour to work it under the foot of my machine for some freehand quilting. The quilting was awful. Skipped stitches and huge difficulty maneuvering the fabric around because so much of it was jammed under the arm... it's all getting ripped out in the morning. So I know that I should pin it or baste it better. How do I do that if I don't have the floorspace to lay it out (and outside isn't an option)? I do have a folding table that I use for my SM and iron... it's about 2 1/2' x 6' but can't figure a way to use that for pinning. And once I get the quilt pinned (or basted if I must, but I really prefer pinning) better, how do I machine quilt it? How do I get it to *move* with the stitches once I've got so much squeezed under the arm of the machine? I rolled it into a tube-shape, but that still didn't work well. And should I just give up on freeform quilting (which I've become addicted to) and stick with a basic grid? I really want to get this done by the 14th, which is DH's birthday! Cina, staggering bleary-eyed off to bed (who reallyreallyreally likes W&N cotton batting and has to figure some subtle way to point it out to my mom) |
#7
|
|||
|
|||
Poor you! Tie it. Or if this top has to be quilted, go buy your good old
W&N. Poly batting, even the thin stuff, is not easy to machine quilt. Personally, I'd use it for stuffed animals and save myself the aggravation. Roberta in D "Cina" wrote in message ... Oh wow, it's getting late.... I'm gonna be fun getting up with the kids for their first day back at school from Winter break. ;-) My mom gave me a package of this batting (Polyfil brand, 81"x96") for Christmas. Great, sez I, because DH wanted me to make him a quilt because his blanket is on its last legs, and he said he wanted puffy...I'll use it for him. This stuff is awful! It's all wrinkly and sorta lumpy in spots next to thin spots, and I can't seem to smooth it out. Eventually, I did a half-assed job of pinning it in the center, and then wrestled with it for a half hour to work it under the foot of my machine for some freehand quilting. The quilting was awful. Skipped stitches and huge difficulty maneuvering the fabric around because so much of it was jammed under the arm... it's all getting ripped out in the morning. So I know that I should pin it or baste it better. How do I do that if I don't have the floorspace to lay it out (and outside isn't an option)? I do have a folding table that I use for my SM and iron... it's about 2 1/2' x 6' but can't figure a way to use that for pinning. And once I get the quilt pinned (or basted if I must, but I really prefer pinning) better, how do I machine quilt it? How do I get it to *move* with the stitches once I've got so much squeezed under the arm of the machine? I rolled it into a tube-shape, but that still didn't work well. And should I just give up on freeform quilting (which I've become addicted to) and stick with a basic grid? I really want to get this done by the 14th, which is DH's birthday! Cina, staggering bleary-eyed off to bed (who reallyreallyreally likes W&N cotton batting and has to figure some subtle way to point it out to my mom) |
#8
|
|||
|
|||
Hi there,
I've had your same experiences with high loft batting which is why, if you want to make a nice and fluffy quilt with it, the preferred method is to tie it vs. quilting. Trying to quilt high loft is very frustrating, you have to have it basted very well and even then puckers are a big risk. I have used it for my lap quilts which are primarily tied, but then I try and add a bit of quilting, just something simple to give it the depth that only quilting can do. Only tying the quilt, in my book, is kinda boring. If you want to use that table you mentioned, tape a toothpick at the half-way points on it and align the quilt up with them. Then move on to a different area. Good luck! quiltkitty |
#9
|
|||
|
|||
In article ,
Cina wrote: Oh wow, it's getting late.... I'm gonna be fun getting up with the kids for their first day back at school from Winter break. ;-) My mom gave me a package of this batting (Polyfil brand, 81"x96") for Christmas. Great, sez I, because DH wanted me to make him a quilt because his blanket is on its last legs, and he said he wanted puffy...I'll use it for him. This stuff is awful! It's all wrinkly and sorta lumpy in spots next to thin spots, and I can't seem to smooth it out. Eventually, I did a half-assed job of pinning it in the center, and then wrestled with it for a half hour to work it under the foot of my machine for some freehand quilting. The quilting was awful. Skipped stitches and huge difficulty maneuvering the fabric around because so much of it was jammed under the arm... it's all getting ripped out in the morning. Lots of people have given you great advice on tying or tacking instead of quilting puffy quilts. So I know that I should pin it or baste it better. How do I do that if I don't have the floorspace to lay it out (and outside isn't an option)? I do have a folding table that I use for my SM and iron... it's about 2 1/2' x 6' but can't figure a way to use that for pinning. OK. Fold the backing in half, place a big visible pin on each side to mark the fold, and place the fold along the center of the table. Open out the backing so that the wrong side is facing you and the backing should be centered on the table with the rest hanging off the sides. Some people like to use the biggest binder clips they can find to clamp the backing to the table. Now, fold your batting in half, mark the fold with big pins, and place it on the table matching the pins in the batting with the pins in the backing. Finally, fold the top in half and mark the fold. Match the pins and smooth the part of the quilt that is on top of the table. Re-clamp all three layers to the table. Now, get out those safety pins and pin away. (or just tie the quilt). You should have LOTS of pins. I use my four fingers to measure distance so a pin every 4-5 inches in each direction. When all that is basted, unclamp the quilt and slide to a new section. Keep pinning then sliding until you have done the whole quilt. And once I get the quilt pinned (or basted if I must, but I really prefer pinning) better, how do I machine quilt it? How do I get it to *move* with the stitches once I've got so much squeezed under the arm of the machine? I rolled it into a tube-shape, but that still didn't work well. And should I just give up on freeform quilting (which I've become addicted to) and stick with a basic grid? I really want to get this done by the 14th, which is DH's birthday! Some people have better success with fan folding the quilt to get it to fit. Others simply wad things up and go with the flow. Some do roll their quilts but then use bicycle clips (like to keep your pant leg from getting caught in the chain) to hold and help compress the quilt a bit to get it to fit. I think if I were going to quilt a puffy quilt (god forbid I ever set myself up for that one, but I digress) I would at least grid quilt in the ditch between the blocks before doing anything else to help stabilize things and keep the layers from shifting. But you don't want too dense of quilting or you will lose the "puffy" factor that your husband wants. Personally. I love machine tacking. You either set your machine to zig-zag in place (like a bar tack at the end of a buttonhole) or if you have a fancy machine that will do single motifs like a star or somesuch and sew one every say, 5 inches or so in a grid pattern across the quilt. Just sew a tack, move the quilt, sew the next tack and so on. Trim up the threads at the end. Puffy quilt, won't shift and your sanity is intact. Hang in there! marcella |
#10
|
|||
|
|||
marcella wrote:
Lots of people have given you great advice on tying or tacking instead of quilting puffy quilts. Indeed, they have! This newsgroup rocks! OK. Fold the backing in half, place a big visible pin on each side to mark the fold, and place the fold along the center of the table. Open out the backing so that the wrong side is facing you and the backing should be centered on the table with the rest hanging off the sides. Some people like to use the biggest binder clips they can find to clamp the backing to the table. Now, fold your batting in half, mark the fold with big pins, and place it on the table matching the pins in the batting with the pins in the backing. Finally, fold the top in half and mark the fold. Match the pins and smooth the part of the quilt that is on top of the table. Re-clamp all three layers to the table. Now, get out those safety pins and pin away. (or just tie the quilt). You should have LOTS of pins. I use my four fingers to measure distance so a pin every 4-5 inches in each direction. When all that is basted, unclamp the quilt and slide to a new section. Keep pinning then sliding until you have done the whole quilt. Wow, that sounds like something I could do! I've never done one this large, and so far I've gotten away with taping the layers to the floor (blue painters tape is *fantastic* for this!) and crawling around as I pin... trying to do that with such a large quilt and not enough floor space was driving me bananas. But I'm wondering... I've never done a tied quilt before. How far apart should they be? Will embroidery floss work? How tightly do I tie it? snip more good stuff Personally. I love machine tacking. You either set your machine to zig-zag in place (like a bar tack at the end of a buttonhole) or if you have a fancy machine that will do single motifs like a star or somesuch and sew one every say, 5 inches or so in a grid pattern across the quilt. Just sew a tack, move the quilt, sew the next tack and so on. Trim up the threads at the end. Puffy quilt, won't shift and your sanity is intact. Ooooooh! I want a new machine now! I like the idea of a puffy quilt with little embroidered stars, but sadly my machine is a straight-stitch only. Soon, though... Hang in there! Thanks for the help! Cina |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sturdiest batting | CHARLES MURPHY | Quilting | 12 | December 21st 03 11:12 PM |
Batting Scraps | Tia Mary-remove nekoluvr to reply | Quilting | 13 | October 11th 03 04:50 PM |
Batting mini-rant: Poly v. Cotton | Tia Mary-remove nekoluvr to reply | Quilting | 2 | September 16th 03 06:01 PM |