If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Atlas motor usage
Hi, and Happy New Year to all.
I wrote a month or so ago, and didn't get any responses, so I'll try this again. I got an Atlas pasta machine motor, and in the accompanying literature it said not to run the motor for longer than 15 minutes. Is that just what they say, or do most people only use the pasta machine with motor for 15 minutes, and then switch to the hand crank? I haven't used mine yet, because I'm worried about damaging it, but if others have had no problems running the motor for longer periods of time, then I'm all ready to dive in and get some conditioning done without having to use it the "old fashioned" way. Thanks in advance, TheDormouse |
Ads |
#2
|
|||
|
|||
Atlas motor usage
I turn mine on and off as needed, I never just let it run w/o it being
in use - too noisy. What you can do is get a floor pedal (like for a sewing machine) and plug the machine into that. Then you can just turn it on and off as you need it, w/o having to mess with the switch. Barbara Bead & Polymer Clay Votary There is a very fine line between a hobby and mental illness. (Dave Barry) http://www.penguintrax.com and http://www.backseatgrammarian.com NEW! http://www.polymerclayworkshops.com TheDormouse wrote: Hi, and Happy New Year to all. I wrote a month or so ago, and didn't get any responses, so I'll try this again. I got an Atlas pasta machine motor, and in the accompanying literature it said not to run the motor for longer than 15 minutes. Is that just what they say, or do most people only use the pasta machine with motor for 15 minutes, and then switch to the hand crank? I haven't used mine yet, because I'm worried about damaging it, but if others have had no problems running the motor for longer periods of time, then I'm all ready to dive in and get some conditioning done without having to use it the "old fashioned" way. Thanks in advance, TheDormouse |
#3
|
|||
|
|||
Atlas motor usage
15 minutes is actually a pretty long time in
standing-there-feeding-clay-into-the-slot terms. Most times, even when doing a skinner blend with a lot of clay or doing bulk conditioning, its only five-10 minutes then you turn it off to get the next huge lump flattened and ready to feed. Just let it rest once in a while, particularly if you feel it and its getting hot. -- Sarajane's Polyclay Gallery Beads-Dolls-Wearable Art http://www.polyclay.com See the progress at "Pieces" http://www.polyclay.com/store.htm "TheDormouse" wrote in message ... Hi, and Happy New Year to all. I wrote a month or so ago, and didn't get any responses, so I'll try this again. I got an Atlas pasta machine motor, and in the accompanying literature it said not to run the motor for longer than 15 minutes. Is that just what they say, or do most people only use the pasta machine with motor for 15 minutes, and then switch to the hand crank? I haven't used mine yet, because I'm worried about damaging it, but if others have had no problems running the motor for longer periods of time, then I'm all ready to dive in and get some conditioning done without having to use it the "old fashioned" way. Thanks in advance, TheDormouse |
#4
|
|||
|
|||
Atlas motor usage
Little mouse...don't let your fear of damaging your motor stop you from
playing with it! Since the motor and actual machine was developed for making pasta, the warning makes sense that you could actually burn the motor out if you tried to do "production" pasta making. I totally agree with both Barbara and Sarajane...I can't imagine running the motor non-stop for more than a few minutes at a time. The motor is an awesome time (and wrist/elbow) saver not having to use the crank on the machine...but BOY! is it noisy!!! Lori "Sarajane Helm" wrote in message ... 15 minutes is actually a pretty long time in standing-there-feeding-clay-into-the-slot terms. Most times, even when doing a skinner blend with a lot of clay or doing bulk conditioning, its only five-10 minutes then you turn it off to get the next huge lump flattened and ready to feed. Just let it rest once in a while, particularly if you feel it and its getting hot. -- Sarajane's Polyclay Gallery Beads-Dolls-Wearable Art http://www.polyclay.com See the progress at "Pieces" http://www.polyclay.com/store.htm "TheDormouse" wrote in message ... Hi, and Happy New Year to all. I wrote a month or so ago, and didn't get any responses, so I'll try this again. I got an Atlas pasta machine motor, and in the accompanying literature it said not to run the motor for longer than 15 minutes. Is that just what they say, or do most people only use the pasta machine with motor for 15 minutes, and then switch to the hand crank? I haven't used mine yet, because I'm worried about damaging it, but if others have had no problems running the motor for longer periods of time, then I'm all ready to dive in and get some conditioning done without having to use it the "old fashioned" way. Thanks in advance, TheDormouse |
#5
|
|||
|
|||
Atlas motor usage
That fifteen minutes refers to continuous operation. On and off
operation can go on for sometime. I have use mine that way for several hours when working on projects. Hope that helps. NWPC On Thu, 4 Jan 2007 22:29:17 -0500, "TheDormouse" wrote: Hi, and Happy New Year to all. I wrote a month or so ago, and didn't get any responses, so I'll try this again. I got an Atlas pasta machine motor, and in the accompanying literature it said not to run the motor for longer than 15 minutes. Is that just what they say, or do most people only use the pasta machine with motor for 15 minutes, and then switch to the hand crank? I haven't used mine yet, because I'm worried about damaging it, but if others have had no problems running the motor for longer periods of time, then I'm all ready to dive in and get some conditioning done without having to use it the "old fashioned" way. Thanks in advance, TheDormouse |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Atlas Pasta Machine Motor and 15min limitation | TheDormouse | Polymer Clay | 1 | December 1st 06 02:53 PM |
Atlas Marcato 180 and pastadrive....where? | [email protected] | Polymer Clay | 1 | April 28th 06 07:12 PM |
Atlas sewing machine help | Debra | Quilting | 2 | September 1st 04 05:09 PM |
Atlas 150 Pasta Machine Instruction Book | Kimma Rock | Polymer Clay | 2 | January 6th 04 04:31 PM |
AD: Atlas Pasta Machine up for Auction | Rachel | Polymer Clay | 0 | November 5th 03 08:47 PM |