If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Another newbie with questions....
Hi folks! I've been a member of a couple of other newsgroups for a
while, and just discovered this one. I've been doing sculpting and glass wrapping for about 4 years now, after abandoning my artistic side (at least the sculptor part of it) for about 20 years. I'm loving this new world... A couple of questions for those with more long-term experience: I've notice a lot of people write about using acrylic glazes and brand names for finishing the baked polymer, but I started with lacquer and then moved over to polyurethane. I enjoy the high gloss and especially the slightly rubbery texture (my pieces tend toward the slightly alien-esque....). But are there long-term problems with polyurethane that I don't know about yet? I've sold several pieces and I'm frightened of a rash of phone calls down the road with complaints of disentegrating art.... I particulartly enjoy playing with the metallic and stone clays put out by Fimo and Sculpey, but I'm not finding the stone (particularly black) in the Sculpey line except for their little sampler packs. Has it been discontinued? If so, does anybody have a stockpile that they're black-marketing? All for now, any help would be appreciated. |
Ads |
#2
|
|||
|
|||
Another newbie with questions....
Of all the finishing products out there, varathane is still considered
by most to be the best. I believe that Sarajane Holm has done quite a bit of testing of it's durability. You have to get it at a place like Home Depot, but if you are doing sculptures it's great because it comes in a large quantity unlike Fimo or Sculpey glaze which comes in those tiny bottles. I use Future floor polish on my pieces and so far have not had any problems with it. I often work with a mixed media technique which includes embossing powders, and a few coats of the Future keeps the embossing powder from scratching and becoming dull. As far as stone colored clays, have you tried Cernit's stone colors? If not, I recommend you get a sampler pack and see how you like them. I think they are awesome. They come in several colors and mixed with the regular clay, a little goes a long way. One artist who uses them alot in her work is Christi Friesen (www.cforiginals.com) and it yields some awesome results. Happy Claying! Cheryl www.cherylsart.net |
#3
|
|||
|
|||
Another newbie with questions....
Oops! Typo! It's Sarajane Helm, not Holm! Sorry Sarajane!
Cheryl |
#5
|
|||
|
|||
Another newbie with questions....
Thanks folks!
I'm currently looking around for Cernit clay, I'll order online if I have to.... And I'll give the Varathane a try. I'm still curious as to whether or not there are any potential problems with the pieces that I've already polyurethaned. If anyone has any horror stories about it, I'd like to hear them. Another question What can be done about fingerprints? I know some people kind of like them, but they make me a little crazy.... |
#6
|
|||
|
|||
Another newbie with questions....
Wear latex gloves.
Sand. Sand. Sand. Some people sand up to 1500 and 2000 grits (available in automotive supply places, for touching up). Others find just 400 grit and 600 grit adequate. "Emmett" wrote in message oups.com... snip What can be done about fingerprints? I know some people kind of like them, but they make me a little crazy.... |
#7
|
|||
|
|||
Another newbie with questions....
Hi Emmett,
The Varathane version of polyurethane that's used on polymer clay is generally the water-washup one. I've never heard of real problems with it unless it applied incorrectly and bubbles or brush-marks occur, etc., but I don't think that's what you mean. You can read all about using Varathane with polymer clay and any problems clayers have had (as well as about using Future and other compatible liquids and waxes) on this page, if you're interested: http://www.glassattic.com/polymer/finishes.htm As for fingerprints and clay, check out this page in particular: http://www.glassattic.com/polymer/sculpture.htm (click on "Fingerprints, Smoothing") There have been several "stone-look" polymer clays over the years... unfortunately some of the best IMO are no longer made (before being discontinued, they were in the FimoSoft line but originally they were just plain old Fimo before it became two lines). The stone clays by Sculpey called Granitex are quite different in from those in that they're more like lint mixed into one of several colors of opaque clay. The Cernit stone clays (called "Nature Colors") now come in a range of types, but some of them are much more like the old Fimo ones than like Granitex. You should be able to mail order Cernit from several of the clay suppliers listed on this page: http://www.glassattic.com/polymer/supplysources.htm And there's more on the different types and brands of stone clays he http://www.glassattic.com/polymer/Characteristics.htm (click on "Special Colors...Stone"...) It's also fun to make your own stone-looks and stone-clays by mixing various inclusions into the clay, or by doing things to the clay after shaping or baking. See these pages for much more on both of those ideas: http://www.glassattic.com/polymer/Faux--many.htm (...click on "Rocklike Rock & Stone"...) http://www.glassattic.com/polymer/inclusions.htm HTH! Diane B. http://www.glassattic.com/polymer/contents.htm --polymer clay "encyclopedia" |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Newbie with a couple of questions | Jo Pender | Quilting | 38 | December 24th 05 07:17 PM |
Newbie questions about polymer clay | Mark Pors | Polymer Clay | 8 | January 14th 05 02:47 AM |
newbie questions | Umberto Ramirez | Polymer Clay | 3 | December 29th 03 05:02 PM |
Newbie and dumb question(s) | NoSpam | Pottery | 3 | October 1st 03 09:40 PM |
AD and dumb questions from a newbie | Nathalie Lebreux | Beads | 7 | September 9th 03 09:45 PM |