If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Intarsia Carriage
Hi Shannon
The yarns are laid across the needles manually then knitted with the carriage so there are no floats. I thought the SK150 carriage had the intarsia setting built in to the carriage. There is a plastic one for the SK155 Brenda in NZ |
Ads |
#2
|
|||
|
|||
Brenda Smith wrote:
Hi Shannon The yarns are laid across the needles manually then knitted with the carriage so there are no floats. I thought the SK150 carriage had the intarsia setting built in to the carriage. There is a plastic one for the SK155 Brenda in NZ Yes, the only reason that there are no floats is because you lay the thread in by hand and don't carry it across the bed, but only in the area you want it. You do have to twist it with the next color to prevent holes. -- Joanne http://members.tripod.com/~bernardschopen/ |
#3
|
|||
|
|||
Ok. That's what I wanted to know. Both my machines have the Intarsia built
in and that's what I've been using. I couldn't understand how an Intarsia carriage would do any different. Thanks, Shannon |
Thread Tools | |
Display Modes | |
|
|