If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Plackets again
I was just looking in my Reader's Digest sewing guide, and it shows another
placket style. I think its a faced placket that is used with French cuffs. I'm wondering how it would look if I used a regular cuff, not a folded over French Cuff, and, instead of having two button holes for cufflinks, have a button on one cuff edge, and a buttonhole on the other cuff edge, but it would not button with the cuff edges overlapped, but "pinched" together, as in a regular French cuff. I guess the answer is "Do one and find out". |
Ads |
#2
|
|||
|
|||
On Tue, 02 Sep 2003 05:44:48 +0000, duh who wrote:
French Cuff, and, instead of having two button holes for cufflinks, have a button on one cuff edge, and a buttonhole on the other cuff edge, but it would not button with the cuff edges overlapped, but "pinched" together, as in a regular French cuff. Hi there, I have two (RTW I must admit) blouses with this cuff finish. Its a bit fiddly to button, but much less so than trying to thread a cufflink. They look fine - just like a cufflink shirt, and without the bulk of the cufflink to annoy you when it bangs against the desk or gets in your way! HTH, Sarah |
#3
|
|||
|
|||
"Sarah Dale" wrote in message news On Tue, 02 Sep 2003 05:44:48 +0000, duh who wrote: French Cuff, and, instead of having two button holes for cufflinks, have a button on one cuff edge, and a buttonhole on the other cuff edge, but it would not button with the cuff edges overlapped, but "pinched" together, as in a regular French cuff. Hi there, I have two (RTW I must admit) blouses with this cuff finish. Its a bit fiddly to button, but much less so than trying to thread a cufflink. They look fine - just like a cufflink shirt, and without the bulk of the cufflink to annoy you when it bangs against the desk or gets in your way! Is the cuff a folded double layer, or single layer? I was wondering how annoying it might be to button. |
#4
|
|||
|
|||
On Tue, 02 Sep 2003 17:39:31 +0000, duh who wrote:
Is the cuff a folded double layer, or single layer? I was wondering how annoying it might be to button. Well, I rate it as 5-10% more fiddly than a normal cuff and 90% less fiddly than a cufflink! And yes, I do own a cuff link shirt - in the last couple of years the fasion for ladies blouses (in the UK) is for them to have male type style details like double cuffs, cuff links etc.. Now - this is going to be hard to do in words (goes to get blouse for reference)- you make your double cuff, and attach to sleeves as normal. Fold each cuff in half, press and pin or tack. Mark button and button hole positions on the inside of the folded double cuff. Button goes on the side with the short distance to the underseam (1 piece sleeve) and the hole goes on long side. The button hole is sewn through both halves of the cuff together, so they are permanently fixed together. The button is sewn on on the inside, and on to the inner layer only, and then from the outside, catch stitch the outer cuff at the corresponding button position to the threads at the back of the button - catch the inner layer of cuff material only - there should be no threads showing on the 'public' side of the cuff - this catch stitching holds the folded cuff together so it doesn't gape or flap around. You fasten by oputting the button through the hole from the inside to the outside, with both cuff ends pointing outwards away from the wrist, so the button is on public view, just like the top of the cufflink would be. You could do this very quickly with a single layer cuff - just stitch the button on the inside rather than the outside, and fasten with cuffs pointing out rather than folded over - it will give you the general idea of what it looks and feels like, and how easy it is to button. The saving grace of the design of my blouse is that the two layers are sewn together whilst making the button hole - 2 separate holes, whilst feasible, would be a real pig to fasten in a hurry in the morning! HTH, Sarah P.S. Email me from your real address (i.e. no spam blocking) if you'd like a picture of my blouse cuffs to help. N.B. Our firewall will block you if you are posting from a hotmail account. |
#5
|
|||
|
|||
Sarah Dale wrote:
The saving grace of the design of my blouse is that the two layers are sewn together whilst making the button hole - 2 separate holes, whilst feasible, would be a real pig to fasten in a hurry in the morning! I think the trade-off would be in ironing--it must be a real pig to iron with the single hole through both halves. :-( I hate to iron, and about the only things I do iron are the nice dressy blouses with details like French cuffs or lots of tucks.w -- Kathy |
#6
|
|||
|
|||
On Thu, 04 Sep 2003 04:26:42 -0800, Kathy Morgan wrote:
Sarah Dale wrote: The saving grace of the design of my blouse is that the two layers are sewn together whilst making the button hole - 2 separate holes, whilst feasible, would be a real pig to fasten in a hurry in the morning! I think the trade-off would be in ironing--it must be a real pig to iron with the single hole through both halves. :-( I hate to iron, and about the only things I do iron are the nice dressy blouses with details like French cuffs or lots of tucks. Hi Kathy, I just iron it as it is held by the buttonhole and button - i.e. already folded in half - dead easy, and does no harm Sarah |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
*&%^%@$*&^ Plackets | Pat | Sewing | 14 | September 4th 03 02:34 PM |