3 to 1 findings

What a great link! Thanks for posting it.

Deirdre

On Wed, 17 Sep 2003 09:34:31 -0400, Steve Guyot
wrote:

Tina- In the findings trade these are called end bars and what you are looking
for is a 3-strand end bar. If you go to http://www.mfma.net/ this is the webite
of the Metal Findings Manufacturers Association. They maintain a search engine
and data base that you might find helpful. If you enter at the search box end
bars I'm sure you'll get some kind of listing. Note though that these companies
are manufacturers and may or may not be able to sell in the quantity you need.
However, they maybe able you to a distributor or re-seller. Good Luck and I hope
this is helpful to you.

Thanks, Steve,

Great link. But isn't a 3 strand end bar a bar with three loops on one side
to attach strands, and a loop in the middle on the other side to attach a
clasp (or chain) to? I'm looking for something to put three threads (within
one strand) into one end that will come out the other side fanned out
through three holes.

Tina


"Steve Guyot" wrote in message
...
Tina- In the findings trade these are called end bars and what you are
looking
for is a 3-strand end bar. If you go to http://www.mfma.net/ this is the
webite
of the Metal Findings Manufacturers Association. They maintain a search
engine
and data base that you might find helpful. If you enter at the search box
end
bars I'm sure you'll get some kind of listing. Note though that these
companies
are manufacturers and may or may not be able to sell in the quantity you
need.
However, they maybe able you to a distributor or re-seller. Good Luck and
I hope
this is helpful to you.

Christina Peterson wrote:

I'm looking for a connector (?) that has one hole on one side (to put
three
strands in), and three holes on the other side (come out through a row
of
three holes) in gold filled. What is this thing called (so I can search
for
them)?

Tina

--
Steve Guyot
Guyot Brothers Co Inc
Decorative jewelry findings & ornamental stampings since 1904
http://guyotbrothers.com

Tina-Sorry, I misunderstood the 1st time around. You are correct about the end
bars. I can't say I've ever seen what your looking for. Unless maybe bullet
ends ?
Steve

Christina Peterson wrote:

Thanks, Steve,

Great link. But isn't a 3 strand end bar a bar with three loops on one side
to attach strands, and a loop in the middle on the other side to attach a
clasp (or chain) to? I'm looking for something to put three threads (within
one strand) into one end that will come out the other side fanned out
through three holes.

Tina

"Steve Guyot" wrote in message
...
Tina- In the findings trade these are called end bars and what you are
looking
for is a 3-strand end bar. If you go to http://www.mfma.net/ this is the
webite
of the Metal Findings Manufacturers Association. They maintain a search
engine
and data base that you might find helpful. If you enter at the search box
end
bars I'm sure you'll get some kind of listing. Note though that these
companies
are manufacturers and may or may not be able to sell in the quantity you
need.
However, they maybe able you to a distributor or re-seller. Good Luck and
I hope
this is helpful to you.

Christina Peterson wrote:

I'm looking for a connector (?) that has one hole on one side (to put
three
strands in), and three holes on the other side (come out through a row
of
three holes) in gold filled. What is this thing called (so I can search
for
them)?

Tina

--
Steve Guyot
Guyot Brothers Co Inc
Decorative jewelry findings & ornamental stampings since 1904
http://guyotbrothers.com



--
Steve Guyot
Guyot Brothers Co Inc
Decorative jewelry findings & ornamental stampings since 1904
http://guyotbrothers.com

Tina:
I think Village Originals has pics of what you want; I tried to send you an
email at yahoo with the pics, but it was returned.

Sorry.
Lisa
"Christina Peterson" wrote in message
news:1063859779.556989@prawn...
Thanks, Steve,

Great link. But isn't a 3 strand end bar a bar with three loops on one
side
to attach strands, and a loop in the middle on the other side to attach a
clasp (or chain) to? I'm looking for something to put three threads
(within
one strand) into one end that will come out the other side fanned out
through three holes.

Tina


"Steve Guyot" wrote in message
...
Tina- In the findings trade these are called end bars and what you are
looking
for is a 3-strand end bar. If you go to http://www.mfma.net/ this is
the
webite
of the Metal Findings Manufacturers Association. They maintain a search
engine
and data base that you might find helpful. If you enter at the search
box
end
bars I'm sure you'll get some kind of listing. Note though that these
companies
are manufacturers and may or may not be able to sell in the quantity you
need.
However, they maybe able you to a distributor or re-seller. Good Luck
and
I hope
this is helpful to you.

Christina Peterson wrote:

I'm looking for a connector (?) that has one hole on one side (to put
three
strands in), and three holes on the other side (come out through a row
of
three holes) in gold filled. What is this thing called (so I can
search
for
them)?

Tina

--
Steve Guyot
Guyot Brothers Co Inc
Decorative jewelry findings & ornamental stampings since 1904
http://guyotbrothers.com

Thanks Lisa,

Could you please send it again at my personal email?

Tina


"Lisa" wrote in message
news
Tina:
I think Village Originals has pics of what you want; I tried to send you
an
email at yahoo with the pics, but it was returned.

Sorry.
Lisa
"Christina Peterson" wrote in message
news:1063859779.556989@prawn...
Thanks, Steve,

Great link. But isn't a 3 strand end bar a bar with three loops on one
side
to attach strands, and a loop in the middle on the other side to attach
a
clasp (or chain) to? I'm looking for something to put three threads
(within
one strand) into one end that will come out the other side fanned out
through three holes.

Tina


"Steve Guyot" wrote in message
...
Tina- In the findings trade these are called end bars and what you are
looking
for is a 3-strand end bar. If you go to http://www.mfma.net/ this is
the
webite
of the Metal Findings Manufacturers Association. They maintain a
search
engine
and data base that you might find helpful. If you enter at the search
box
end
bars I'm sure you'll get some kind of listing. Note though that these
companies
are manufacturers and may or may not be able to sell in the quantity
you
need.
However, they maybe able you to a distributor or re-seller. Good Luck
and
I hope
this is helpful to you.

Christina Peterson wrote:

I'm looking for a connector (?) that has one hole on one side (to
put
three
strands in), and three holes on the other side (come out through a
row
of
three holes) in gold filled. What is this thing called (so I can
search
for
them)?

Tina

--
Steve Guyot
Guyot Brothers Co Inc
Decorative jewelry findings & ornamental stampings since 1904
http://guyotbrothers.com

I have many many three strand end bars in Gold, also 5-strand and two
strand. In silver I have lots of 5-strand in smaller sizes. You can see
the gold 3-strand if you go to my tutorial at:
http://www.sculpey.com/projects/Proj...tianChoker.htm

If you mail me I can tell you more and send you a photo.

Amanda
http://www.picturetrail.com/amandarose1

Thanks, but it's not a connector bar I'm looking for. I'm looking for a a
finding in which you put 3 threads in one hole and fan them out through
three different holes. A three to one finding or connector.

Thanks for trying.

Tina


"Bead Sprite" wrote in message
...


I have many many three strand end bars in Gold, also 5-strand and two
strand. In silver I have lots of 5-strand in smaller sizes. You can see
the gold 3-strand if you go to my tutorial at:
http://www.sculpey.com/projects/Proj...tianChoker.htm

If you mail me I can tell you more and send you a photo.

Amanda
http://www.picturetrail.com/amandarose1

tina, it's probably too late, but I am hosting a bali bulk buy which has
some of these.

lmk if you are interested...

Mary
mary at meijhanadesigns dot com

--
Joy multiplies when it is shared among friends, but grief diminishes with
every division. That is life.
Drizzt Do'Urden (Exile - R.A. Salvatore)
================
MeijhanaDesigns - Unique Earrings and More!
http://www.meijhanadesigns.com
"Christina Peterson" wrote in message
news:1063859779.556989@prawn...
Thanks, Steve,

Great link. But isn't a 3 strand end bar a bar with three loops on one
side
to attach strands, and a loop in the middle on the other side to attach a
clasp (or chain) to? I'm looking for something to put three threads
(within
one strand) into one end that will come out the other side fanned out
through three holes.

Tina


"Steve Guyot" wrote in message
...
Tina- In the findings trade these are called end bars and what you are
looking
for is a 3-strand end bar. If you go to http://www.mfma.net/ this is
the
webite
of the Metal Findings Manufacturers Association. They maintain a search
engine
and data base that you might find helpful. If you enter at the search
box
end
bars I'm sure you'll get some kind of listing. Note though that these
companies
are manufacturers and may or may not be able to sell in the quantity you
need.
However, they maybe able you to a distributor or re-seller. Good Luck
and
I hope
this is helpful to you.

Christina Peterson wrote:

I'm looking for a connector (?) that has one hole on one side (to put
three
strands in), and three holes on the other side (come out through a row
of
three holes) in gold filled. What is this thing called (so I can
search
for
them)?

Tina

--
Steve Guyot
Guyot Brothers Co Inc
Decorative jewelry findings & ornamental stampings since 1904
http://guyotbrothers.com

Thanks, but it's gold filled I need.

Tina


"meijhana" wrote in message
...
tina, it's probably too late, but I am hosting a bali bulk buy which has
some of these.

lmk if you are interested...

Mary
mary at meijhanadesigns dot com

--
Joy multiplies when it is shared among friends, but grief diminishes with
every division. That is life.
Drizzt Do'Urden (Exile - R.A. Salvatore)
================
MeijhanaDesigns - Unique Earrings and More!
http://www.meijhanadesigns.com
"Christina Peterson" wrote in message
news:1063859779.556989@prawn...
Thanks, Steve,

Great link. But isn't a 3 strand end bar a bar with three loops on one
side
to attach strands, and a loop in the middle on the other side to attach
a
clasp (or chain) to? I'm looking for something to put three threads
(within
one strand) into one end that will come out the other side fanned out
through three holes.

Tina


"Steve Guyot" wrote in message
...
Tina- In the findings trade these are called end bars and what you are
looking
for is a 3-strand end bar. If you go to http://www.mfma.net/ this is
the
webite
of the Metal Findings Manufacturers Association. They maintain a
search
engine
and data base that you might find helpful. If you enter at the search
box
end
bars I'm sure you'll get some kind of listing. Note though that these
companies
are manufacturers and may or may not be able to sell in the quantity
you
need.
However, they maybe able you to a distributor or re-seller. Good Luck
and
I hope
this is helpful to you.

Christina Peterson wrote:

I'm looking for a connector (?) that has one hole on one side (to
put
three
strands in), and three holes on the other side (come out through a
row
of
three holes) in gold filled. What is this thing called (so I can
search
for
them)?

Tina

--
Steve Guyot
Guyot Brothers Co Inc
Decorative jewelry findings & ornamental stampings since 1904
http://guyotbrothers.com