If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
I need to buy a 'Rolling Mill', any suggestions ?
Need to get a new Rolling Mill. I don't really want to spend any more
than about $700.00 as my use for it will be VERY basic (texturing metal, flattening out small ingots). I know nothing about 'rolling mills' so any suggestions or information would be very welcome. Thanks, /FC.... |
#2
|
|||
|
|||
I need to buy a 'Rolling Mill', any suggestions ?
FC... wrote:
Need to get a new Rolling Mill. I don't really want to spend any more than about $700.00 as my use for it will be VERY basic (texturing metal, flattening out small ingots). I know nothing about 'rolling mills' so any suggestions or information would be very welcome. Thanks, /FC.... You're not going to get much for $700.00. I found a beautiful electric Dinkel for you on eBay. Unfortunately it is in Germany. http://tinyurl.com/ahv879 I found another one on the US eBay site at http://tinyurl.com/dhv24f The seller wants $800.00 for it. He claims the rolls are in perfect condition, but they don't look that way in the photo. Maybe they are covered in wax. Hard to tell from the photos. Handle missing, which you must have to operate. Contact the seller and bargain. Offer him $400, but only if the rolls are indeed in good condition. Having them reground is costly and a hassle. I'd look for a used one from one of the used equipment dealers in Providence, RI -- Abrasha http://www.abrasha.com |
#3
|
|||
|
|||
I need to buy a 'Rolling Mill', any suggestions ?
Abrasha schrieb:
FC... wrote: .... I found a beautiful electric Dinkel for you on eBay. Unfortunately it is in Germany. http://tinyurl.com/ahv879 Don´t say it too loud, the Austrians would be exhausted if You count them to germany. :-) Mit freundlichem Gruß, Heinrich Butschal -- Schmuck Gutachter und Schmuckverkauf http://www.butschal.de Schmuck nach Maß anfertigen http://www.meister-atelier.de Firmengeschenke und Ehrennadeln http://www.goldschmiede-meister.com Schmuckmanufaktur http://www.schmuckfabrik.de Schmuck gut verkaufen und günstig kaufen http://www.schmuck-boerse.com |
#4
|
|||
|
|||
I need to buy a 'Rolling Mill', any suggestions ?
Heinrich Butschal wrote:
Abrasha schrieb: FC... wrote: ... I found a beautiful electric Dinkel for you on eBay. Unfortunately it is in Germany. http://tinyurl.com/ahv879 Don´t say it too loud, the Austrians would be exhausted if You count them to germany. :-) Artikelstandort: Neuwied, Germany! Besides, even if it weren't, what about "Der Anschluss"? -- Abrasha http://www.abrasha.com |
#5
|
|||
|
|||
I need to buy a 'Rolling Mill', any suggestions ?
Abrasha schrieb:
Heinrich Butschal wrote: Abrasha schrieb: FC... wrote: ... I found a beautiful electric Dinkel for you on eBay. Unfortunately it is in Germany. http://tinyurl.com/ahv879 Don´t say it too loud, the Austrians would be exhausted if You count them to germany. :-) Artikelstandort: Neuwied, Germany! Sorry I didn´t read so far. Anyway it´s sold in the meantime. Besides, even if it weren't, what about "Der Anschluss"? the next politically and emotional mining field. :-) Mit freundlichem Gruß, Heinrich Butschal -- Schmuck Gutachter und Schmuckverkauf http://www.butschal.de Schmuck nach Maß anfertigen http://www.meister-atelier.de Firmengeschenke und Ehrennadeln http://www.goldschmiede-meister.com Schmuckmanufaktur http://www.schmuckfabrik.de Schmuck gut verkaufen und günstig kaufen http://www.schmuck-boerse.com |
#6
|
|||
|
|||
I need to buy a 'Rolling Mill', any suggestions ?
Thanks for the info...
What about the PEPE mills, Are those any good ? http://www.pepetools.com/viewcategory.php/categoryid/89 I found some of the above locally and wanted to get some feedback... Cheers, /FC... |
#7
|
|||
|
|||
I need to buy a 'Rolling Mill', any suggestions ?
FC... wrote:
Thanks for the info... What about the PEPE mills, Are those any good ? http://www.pepetools.com/viewcategory.php/categoryid/89 I found some of the above locally and wanted to get some feedback... Cheers, /FC... How Local? within say 1hr's driving? If so, take some metal samples with you, plus the purchase money and go and try them out. The spec looks ok for the sort of use you will giveit. Let us know if you try one out. |
#8
|
|||
|
|||
I need to buy a 'Rolling Mill', any suggestions ?
FC... wrote:
Thanks for the info... What about the PEPE mills, Are those any good ? http://www.pepetools.com/viewcategory.php/categoryid/89 I found some of the above locally and wanted to get some feedback... Cheers, /FC... Pepe tools are made in Russia, mediocre quality, but not all bad. -- Abrasha http://www.abrasha.com |
#9
|
|||
|
|||
I need to buy a 'Rolling Mill', any suggestions ?
I found this one at Rio and it looks like just the Rolling Mill I
might Need ! It looks like it might be of better quality than the PEPE unit. I like the fact that it has a much wider 'FLAT" surface too. What do you folks think... ? DRM C130 with Reduction http://www.durston.co.uk/lan-en/prod-m-drm130-en.htm |
#10
|
|||
|
|||
I need to buy a 'Rolling Mill', any suggestions ?
On Thu, 12 Mar 2009 10:09:44 -0700, in rec.crafts.jewelry "FC..."
wrote: I found this one at Rio and it looks like just the Rolling Mill I might Need ! It looks like it might be of better quality than the PEPE unit. I like the fact that it has a much wider 'FLAT" surface too. What do you folks think... ? DRM C130 with Reduction http://www.durston.co.uk/lan-en/prod-m-drm130-en.htm You won't regret buying a Durston Mill. Highest quality, great customer service and support in the rare event you need it. Note several models available. The one you flagged has an 80 mm flat roll, with wire grooves for the rest. If you don't need the wire, you can get it all flat (130 mm), but I'd guess the wire rolls are useful, and you'll likely find 80 mm of flat capacity will serve almost any needs for normal jewelry scale work. Do a quick price comparison with the Italian Cavallin mills too, before choosing. Equal quality, though not as accessable customer service from the manufacturer. But if from Rio or a similar good supplier, that's not an issue, since they too provide good support. Peter |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rolling Mill | Kendall Davies | Jewelry | 13 | July 17th 12 06:07 PM |
rolling mill questions | ted frater | Jewelry | 0 | September 19th 06 07:38 AM |
Calibrating a Rolling Mill | Frosty | Jewelry | 5 | May 20th 06 03:31 AM |
Slitting machine, Slitting, Rolling mill, Wire Flattening Mill, Sheet Leveler, Section Leveler, Scalping Machine, Brush Machine, coiler, decoiler, recoiler, 4 Hi, 6 Hi, 4 High, 6 High, Rolling mill, Wire Flattening Mill, Polishing Machine, Rewinding | korak | Marketplace | 0 | December 14th 03 05:52 PM |
Slitting machine, Slitting, Rolling mill, Wire Flattening Mill, Sheet Leveler, Section Leveler, Scalping Machine, Brush Machine, coiler, decoiler, recoiler, 4 Hi, 6 Hi, 4 High, 6 High, Rolling mill, Wire Flattening Mill, Polishing Machine, Rewinding | korak | Quilting | 0 | December 14th 03 05:52 PM |