If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Is there such a thing as a "complete" kit, machine, software, frames, etc?
I am not interested in embroidering huge pictures. I would like something
that would put little things on shirt collars, cuffs, pockets, baby and children's clothes. I am thinking absolutely nothing bigger than about 4-5". Most things I would like to do would be little, 1"-2". I have a good friend who machine embroiders and I cannot believe the money she has to spend on accessories, software, frames, etc. for her hobby. I have seen her spend thousands of dollars on these things and she still does not have the capability to scan something and make her own patterns. I would like to be able to scan a picture and simplify it to embroider it. Her machine was as much as a good used car. Is there anything out there that would include everything I need to have an embroidery machine to do small things? I think it is probably wishful thinking on my part. I just can't believe that it is still necessary to purchase all these things and horribly overpriced software to have an embroidery machine. Suggestions?? |
Ads |
#2
|
|||
|
|||
Is there such a thing as a "complete" kit, machine, software,frames, etc?
Autumn wrote:
I am not interested in embroidering huge pictures. I would like something that would put little things on shirt collars, cuffs, pockets, baby and children's clothes. I am thinking absolutely nothing bigger than about 4-5". Most things I would like to do would be little, 1"-2". I have a good friend who machine embroiders and I cannot believe the money she has to spend on accessories, software, frames, etc. for her hobby. I have seen her spend thousands of dollars on these things and she still does not have the capability to scan something and make her own patterns. I would like to be able to scan a picture and simplify it to embroider it. Her machine was as much as a good used car. Is there anything out there that would include everything I need to have an embroidery machine to do small things? I think it is probably wishful thinking on my part. I just can't believe that it is still necessary to purchase all these things and horribly overpriced software to have an embroidery machine. Suggestions?? Go to eBay and find someone selling a Singer EU (or P.O.E.M.) which has a 4x4 stitching field, and comes with CSII software which can be used to digitize as well as run the machine. You will need a computer with Windows 98 or 95 to run it, often they are listed with a laptop already loaded. There are new machines you can buy for under $1,000, that do embroidery only. But you have to buy software for digitizing in addition. Many people like Embird for that. You could also look at the Singer Futura machines which do embroidery and have a fairly good software package included, I think. -- Joanne stitches @ singerlady.reno.nv.us.earth.milky-way.com http://members.tripod.com/~bernardschopen/ |
#3
|
|||
|
|||
Is there such a thing as a "complete" kit, machine, software, frames, etc?
Hi,
As far as your question, is there such a thing as a "complete...etc", yes, sort of. If you want to do small embroidery on garments, then an embroidery-only machine would do that for you, and you can get them for $200-$400, and they include everything you need to embroider, except the thread. Provided you are happy with the designs that come with the machine and are willing to spend more $$ on additional design cards. These machines usually embroider up to a 4 X 4 inch area, one of the most popular is the Brother/Disney machines. These machines are complete in the fact that you can open the box, insert your garment in the included hoops, and embroider a pre-made design within an hour. Some of them come with software to create your own designs, but then you need a box to transfer them to the machine, or the machine must be able to interface with your computer. Fortunately a lot more of the mfgrs are including this interface (USB or serial port, some have floppy disks) on the machine, saving you hundreds in additional expenses for transfer boxes. And to make even more money, the transfer box makers usually only include 1-3 formats per box, so if you buy a newer machine with a different format, you must buy a new box with that format. The format is the emb machine makers file extension, such as .sew, .xxx, .hus. For example, the .hus format is for Husqvarna machines only, they will only recognize that file as an embroidery design. Embird is a program that will allow you to change from one format to another. So if you have a .HUS design, you can change the format for your machine that might only take the .XXX format. As far as taking a scan of a photo and embroidering it? GOOD LUCK! It must first be digitized by someone (meaning a real person). The scanned picture must be made into a vector drawing, similar to a coloring book page, then each section of the picture is filled in by the software you are using to digitize it, meaning to make it possible for the embroidery machine to complete the design within the limits of the machine. It can be very tedious and frustrating, I know because I tried to do it myself, and had very little, if any, success with the high end applications. PE-DESIGN by Brother claims you can scan and embroider, but be prepared for some extensive learning. Even simple pictures can take hours to turn into a suitable design that the machine can embroider. While there are many software companies that advertise this is possible, none that I have tried are that simple. They take many hours of learning and practice, even a simple business card can take some time to digitize properly and create an embroidery. Pre-Design is a small application that allows you to create your own designs by drawing them in the program, then the program will digitize it for you to use in the embroidery machine. I have had good success with this program and it is very easy to learn. You can see some screenshots of this app and get a free trial to see if this might be what you're looking for he http://www.pre-design.eu/ There are also other programs to do monograms, such as Monogram Wizard, but again, you either need a transfer box or the embroidery machine must interface with the computer. This is where the real expense comes in, the transfer boxes are indeed expensive, as well as the design software, some of them can cost thousands of dollars. You can buy a "complete" machine at places like Wal-Mart, try it and if you don't like it, or it doesn't suit your needs, you can always return it or resell it and upgrade to a more fully featured machine. Hope this helps you. "Autumn" wrote in message ... I am not interested in embroidering huge pictures. I would like something that would put little things on shirt collars, cuffs, pockets, baby and children's clothes. I am thinking absolutely nothing bigger than about 4-5". Most things I would like to do would be little, 1"-2". I have a good friend who machine embroiders and I cannot believe the money she has to spend on accessories, software, frames, etc. for her hobby. I have seen her spend thousands of dollars on these things and she still does not have the capability to scan something and make her own patterns. I would like to be able to scan a picture and simplify it to embroider it. Her machine was as much as a good used car. Is there anything out there that would include everything I need to have an embroidery machine to do small things? I think it is probably wishful thinking on my part. I just can't believe that it is still necessary to purchase all these things and horribly overpriced software to have an embroidery machine. Suggestions?? |
#4
|
|||
|
|||
Is there such a thing as a "complete" kit, machine, software, frames, etc?
Thank you both for the informative replies. I will look into these things. I
just looked at the Disney machine at Wal-Mart the other day, which prompted my question in the first place. :-) My other reason is I have a new (first) grandchild and would like to make some cute things for her. Autumn "Autumn" wrote in message ... I am not interested in embroidering huge pictures. I would like something that would put little things on shirt collars, cuffs, pockets, baby and children's clothes. I am thinking absolutely nothing bigger than about 4-5". Most things I would like to do would be little, 1"-2". I have a good friend who machine embroiders and I cannot believe the money she has to spend on accessories, software, frames, etc. for her hobby. I have seen her spend thousands of dollars on these things and she still does not have the capability to scan something and make her own patterns. I would like to be able to scan a picture and simplify it to embroider it. Her machine was as much as a good used car. Is there anything out there that would include everything I need to have an embroidery machine to do small things? I think it is probably wishful thinking on my part. I just can't believe that it is still necessary to purchase all these things and horribly overpriced software to have an embroidery machine. Suggestions?? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
"Butterfly Dress" in "Beads Buttons and Lace/Romantic Style" both by Jennie Atkinson | Roseagh | Yarn | 4 | July 31st 07 10:00 AM |
OT proposed discussion: How did you learn to be a "woman" ratherthan a "girl"? | off kilter quilter | Quilting | 0 | August 30th 06 02:33 AM |
Geoffrey Budworth's "The Complete Guide To Knots And Knot Tying"... | Bitchin' Bonney | Knots | 1 | June 7th 06 06:57 AM |
Guide for "Stitch in the Ditch" on frames?? | Clarence Crow | Quilting | 10 | May 12th 06 09:08 PM |
FA: Chappell's "The Potter's Complete Book of Clays and Glazes" | Hugh Lyon-Sach | Pottery | 0 | December 6th 05 12:10 PM |