If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#21
|
|||
|
|||
Patterns carried the info for 36" fabric into the '70s. I remember thinking
about that. I also bought fabric at JC Penny's, well into the '70s when I was working there. G Just found a piece of 36" in a batch of stuff I bought from an estate sale a while back. And remember, in Japan some fabric is woven at 13-14" wide. (for kimonos and yakutas.) Pati, in Phx Pat in Virginia wrote: B: The JCP in Valley Stream NY also had good fabric department. It was at the foot of the escalator in the basement. The workers were very patient and helpful. That was when I was in High School. Last time I was there, a few years ago, the store was more stylish but the fabric was long gone and the sales help were hard to find. And they call this progress? Years later I worked in a small fabric shop and we still sold some 36" fabric. That would have been early 1970. If anyone has old patterns, go look at the yardage charts. That should give an idea when the widths started to change. PAT in VA/USA Butterfly wrote: I remember buying fabric at J C Penney's, in the basement, and the gal (Joyce was her name--and I can picture her as if she was standing next to me--she was GOOD) bringing it to our attention that the fabric was now wider so we wouldn't NEED as much and then she helped me lay out the pattern. The Manager, at the time, was extremely good about the Fabric Dept Ladies helping you understand how the difference could affect your laying out : ) You NEVER felt rushed. I was sad when she retired. Butterfly (not even sure if that store is still there) |
Ads |
#22
|
|||
|
|||
I was taught in jr. high to was fabric before cutting. Shrinkage of cotton was
much more a fact of life then. That little machine was a measurematic. Couldn't easily use them for knit fabrics because it would stretch them out of shape. House of Fabrics quit using them because they were leased, and the expense was more than they were worth. Pati, in Phx Nell Reynolds wrote: Do you remember the little machine (about 4" wide by 6" high) that stuck up above the edge of the cutting table? It had a horizontal notch that the saleslady ran the folded edge of the fabric through, after maneuvering it back and forth once or twice to find the starting point. Then she pulled it through and a gauge measured the yardage. When she got to the length you asked for, she pushed down on a lever on the side which made something cut a snip in the fabric. Then she TORE it across and wrapped it up. And nobody ever thought of washing fabric before cutting it out. Nell, still in nostalgia "MB" wrote in message ... Does anyone remember when fabric stopped being loomed in 36" widths?.... ( just love trivia !)....Mary Snipped: I got a copy of a quilt book that was published in 1959. I was amused by some of the things written and thought you all might get a kick out of some of it. "Almost all materials suitable for making quilts come in a width of 36 inches." (remember 36" fabric! It's been a long time since I've seen any) |
#23
|
|||
|
|||
It could also have something to do with cutting patterns on 45" as opposed
to 36". You get more leeway with 45", don't you? Smee "The Nielands" wrote in message news:guc3b.279292$uu5.62488@sccrnsc04... I remember working at a fabric shop in the late 60s, and I'm sure we still had 36-inch fabric then, but 45-inch was becoming much more prevalent. I have no idea why 45-inch became the standard, but it could have been smart marketing on the part of the fabric manufacturers. If it took 2-1/2 yards of 36" fabric to make a dress but only 2 yards of 45" fabric, my guess is the consumer gravitated to the 45" fabric. Now, we're all smart enough to realize that the cost was probably about the same, because the cost for the 45" fabric was most likely higher than that of the 36" fabric. But if people felt they were getting by with less (we do let our minds play tricks on us sometimes) and then preferred the 45" fabric as a result, the manufacturers were probably quick to give them what they wanted. Then again, it could have been due to changes in machinery!!! Louise in Iowa "Patti" wrote in message ... Yes, it was definitely after the War. You can still get fabrics from a 36" loom nowadays, eg Broderie Anglais. I have a feeling it was in the sixties. . In article cW83b.276516$YN5.187730@sccrnsc01, Julia Altshuler writes When did the industry standard change to 45" widths? And why? Obviously it wasn't too terribly long ago. Was it after WWII? Did it have something to do with fashion or machinery? I'm curious. --Lia -- Best Regards pat on the hill |
#24
|
|||
|
|||
"Nell Reynolds" wrote in message ... Do you remember the little machine (about 4" wide by 6" high) that stuck up above the edge of the cutting table? It had a horizontal notch that the saleslady ran the folded edge of the fabric through, after maneuvering it back and forth once or twice to find the starting point. Then she pulled it through and a gauge measured the yardage. When she got to the length you asked for, she pushed down on a lever on the side which made something cut a snip in the fabric. Then she TORE it across and wrapped it up. And nobody ever thought of washing fabric before cutting it out. Nell, still in nostalgia Not true about not washing. My mom _always_ washed the fabric first. She didn't want my dress to shrink a size after it was sewn. I also learned early on to wash ready-made garments before I ever wore them. I got a nasty case of hives when I was 10 or so from a brand new blouse. So, I wash everything first - clothes and yardage. Happy stitching, Janet of Gar |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
eay: OLD quilting and sewing items in my store | marilyn safier | Marketplace | 0 | June 20th 04 09:57 PM |
freely programmable wrist watch? time signal over DCF77 ? | Andreas K de | Jewelry | 4 | February 28th 04 02:35 AM |
Newbie question- outline quilting and so on | Barbara Bomberger | Quilting | 5 | July 20th 03 08:50 PM |
Quilting Thread question | Carol Wolfe | Quilting | 9 | July 15th 03 05:20 AM |
Need some advice | Jalynne | Beads | 11 | July 5th 03 11:20 PM |