If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
CurveMaster Presser Foot -
Does anybody here use one of these?
Mickie |
Ads |
#2
|
|||
|
|||
CurveMaster Presser Foot -
One of these days I will g
It's still in my drawer! .. In message .com, Mickie Swall writes Does anybody here use one of these? Mickie -- Best Regards pat on the hill |
#3
|
|||
|
|||
CurveMaster Presser Foot -
FWIW, it didn't work with my Janome. Or, I should say that it worked great,
but the seam was not even close to 1/4". I emailed the company and their response was "oh, well that happens sometimes. Just move your needle over until it's a quarter inch." When I pointed out that would cause problems when I took the foot off and went to a different foot, they said that was pretty much my problem. My problem has been solved -- the foot has been given away, and I learned how to sew curved seams without it. -- Kathy A. (Woodland, CA) Queen of Fabric Tramps http://www.kayneyquilting.com , remove the obvious to reply "Cats" wrote in message ... I have one. I tried it and it worked. I haven't had time to make a major curved project with mine but will definitely use it then. One of my sewing girls tried one and made a magnificent quilt of string pieced half and quarter circles straight off with no problems - and some of the circle segments were cut on the bias! NAYY - but I would say that was a pretty good recommendation. As a bonus, the foot also sews a good scant 1/4" seam on straight edges, and the adapters are handy for testing other snap on feet. -- Cats ^;;^ ^;;^ ^;;^ ( U ) ( U ) ( U ) Enness Boofhead Donut http://community.webshots.com/user/witchofthewest catsatararatATyahooDOTcomDOTau "Mickie Swall" wrote in message oups.com... : Does anybody here use one of these? : : Mickie : |
#4
|
|||
|
|||
CurveMaster Presser Foot -
I got one, opened the package, tried to attach the plastic adapter for
my machine, had to press down really hard because it DIDN'T fit. Then, SNAP!, and it fit...but it broke the plastic that holds the cross bar. I contacted the website for the CurveMaster and a few days later I got a response stating that they would replace it if I mailed my broken one. I decided to try it (it was cracked but not broken apart) for a double wedding ring block first since didn't get the chance to use it before it broke. It worked great but I had trouble with raising the presser foot and hitting it with the needle. Each time I used it, I chipped off a little more. After I finished the block, I put it away and forgot about it. Recently I wrote to them again since I lost the address. I got a reply in about two days and then I mailed it back to them in FL. Within ten days I had a new one in my possession. I have a different machine now (Janome 6500) and I haven't used it yet. Like others, I plan to use it eventually. |
#5
|
|||
|
|||
CurveMaster Presser Foot -
Hhmmmm - the majority of the sewers here use Janomes
(anywhere from 35yo to 6months - the machines, NOT the sewers!) and none have had any problems. We tried them in a series of classes and managed to get them onto a wide range of new and old machines including Singers, Janomes, Husquvarnas, Berninas (admit this one was the most difficult to attach) and one we can't identify (but very old and sews beautifully). Sorry you had problems. Most here managed perfect 4" Drunkard's Path blocks by the second try with no pins and no previous experience sewing curves. Despite the help of the CM foot I still don't like sewing curves. I like the effects that can be achieved in quilts using them, and I like looking at them when they are sewn by others - but I don't like sewing them myself. When I want curves I applique LOL! -- Cats ^;;^ ^;;^ ^;;^ ( U ) ( U ) ( U ) Enness Boofhead Donut http://community.webshots.com/user/witchofthewest catsatararatATyahooDOTcomDOTau "Kathy Applebaum" wrote in message m... : FWIW, it didn't work with my Janome. Or, I should say that it worked great, : but the seam was not even close to 1/4". I emailed the company and their : response was "oh, well that happens sometimes. Just move your needle over : until it's a quarter inch." When I pointed out that would cause problems : when I took the foot off and went to a different foot, they said that was : pretty much my problem. My problem has been solved -- the foot has been : given away, and I learned how to sew curved seams without it. : : -- : Kathy A. (Woodland, CA) : Queen of Fabric Tramps : http://www.kayneyquilting.com , : remove the obvious to reply : : : "Cats" wrote in message : ... : I have one. : I tried it and it worked. : I haven't had time to make a major curved project with mine : but will definitely use it then. : One of my sewing girls tried one and made a magnificent : quilt of string pieced half and quarter circles straight off : with no problems - and some of the circle segments were : cut on the bias! : : NAYY - but I would say that was a pretty good : recommendation. : : As a bonus, the foot also sews a good scant 1/4" seam on : straight edges, and the adapters are handy for testing other : snap on feet. : -- : Cats ^;;^ ^;;^ ^;;^ : ( U ) ( U ) ( U ) : Enness Boofhead Donut : : http://community.webshots.com/user/witchofthewest : catsatararatATyahooDOTcomDOTau : : "Mickie Swall" wrote in message : oups.com... : : Does anybody here use one of these? : : : : Mickie : : : : : : |
#6
|
|||
|
|||
CurveMaster Presser Foot -
It's possible it was just that particular foot that was off -- I couldn't
pin the company down on the issue. -- Kathy A. (Woodland, CA) Queen of Fabric Tramps http://www.kayneyquilting.com , remove the obvious to reply "Cats" wrote in message ... Hhmmmm - the majority of the sewers here use Janomes (anywhere from 35yo to 6months - the machines, NOT the sewers!) and none have had any problems. We tried them in a series of classes and managed to get them onto a wide range of new and old machines including Singers, Janomes, Husquvarnas, Berninas (admit this one was the most difficult to attach) and one we can't identify (but very old and sews beautifully). Sorry you had problems. Most here managed perfect 4" Drunkard's Path blocks by the second try with no pins and no previous experience sewing curves. Despite the help of the CM foot I still don't like sewing curves. I like the effects that can be achieved in quilts using them, and I like looking at them when they are sewn by others - but I don't like sewing them myself. When I want curves I applique LOL! -- Cats ^;;^ ^;;^ ^;;^ ( U ) ( U ) ( U ) Enness Boofhead Donut http://community.webshots.com/user/witchofthewest catsatararatATyahooDOTcomDOTau "Kathy Applebaum" wrote in message m... : FWIW, it didn't work with my Janome. Or, I should say that it worked great, : but the seam was not even close to 1/4". I emailed the company and their : response was "oh, well that happens sometimes. Just move your needle over : until it's a quarter inch." When I pointed out that would cause problems : when I took the foot off and went to a different foot, they said that was : pretty much my problem. My problem has been solved -- the foot has been : given away, and I learned how to sew curved seams without it. : : -- : Kathy A. (Woodland, CA) : Queen of Fabric Tramps : http://www.kayneyquilting.com , : remove the obvious to reply : : : "Cats" wrote in message : ... : I have one. : I tried it and it worked. : I haven't had time to make a major curved project with mine : but will definitely use it then. : One of my sewing girls tried one and made a magnificent : quilt of string pieced half and quarter circles straight off : with no problems - and some of the circle segments were : cut on the bias! : : NAYY - but I would say that was a pretty good : recommendation. : : As a bonus, the foot also sews a good scant 1/4" seam on : straight edges, and the adapters are handy for testing other : snap on feet. : -- : Cats ^;;^ ^;;^ ^;;^ : ( U ) ( U ) ( U ) : Enness Boofhead Donut : : http://community.webshots.com/user/witchofthewest : catsatararatATyahooDOTcomDOTau : : "Mickie Swall" wrote in message : oups.com... : : Does anybody here use one of these? : : : : Mickie : : : : : : |
#7
|
|||
|
|||
CurveMaster Presser Foot -
I have one of these and took it out thinking it would help on the
double wedding ring I'm struggling with. Only problem is I can't get it to work properly like they show it does with drunkards path. So I've basically just been using the 1/4" edge on it. What trick did you use on the double wedding ring? I really need to get this thing cranking because my parent's 50th is the middle of October. LizA. Kent, WA |
#8
|
|||
|
|||
CurveMaster Presser Foot -
Mickie Swall wrote:
Does anybody here use one of these? Mickie I have one - I watched a woman demonstrate it at MAQF...boy did that look easy. came home, grabbed some scraps cut out some templates then some pieces....tried 2 blocks. Both of them I ended up stretching the top piece way out of shape I plan on trying again...someday Roberta (in VA) |
#9
|
|||
|
|||
CurveMaster Presser Foot -
I was hoping to find someone adept in its use that will also be in the vicinity of Lancaster PA during the quilt show in April. If you know anybody that fits the requirements, will you please have them contact me? Thanks! Mickie |
#10
|
|||
|
|||
Wedding Rings - wasCurveMaster Presser Foot -
I had a class last year that made 7 king size wedding ring
quilts with no problems. We used a set of templates (the ones from Quilting from the Heartland by Sharlene Jorgenson - NAYY) for the centres and "melon" pieces, and I used the templates to draw up a foundation for the arcs. We drew the arcs onto lightweight interfacing (not the iron-on kind). Fabrics were cut into squares big enough to cover the arc divisions with just a little to spare and away they went. The arcs took no time to sew (most chain pieced 5 or 6 at once) and the "backgrounds" were mostly cut with rotary cutters using the templates, so the blocks fitted together exactly. Because the arcs were on foundations they had virtually no distortion. 6 of the 7 quilts were finished within about 6 weeks, and one of them was a Diamond Variation by Judy Neimeyer (sp?). The woman who made the Diamond Var'n had only made one other quilt. The 7th quilt is delayed by the demands of grandchild(ren) quilt requirements. The rings were about 15-16" across(?) so the curves were gentle enough not to be a real problem. Most of the class did not need CM feet to manage them. WRing was a pattern I always admired but never wanted to make myself. But when this group approached me for lessons I decided I had to find a way that would suit their varied sewing levels or I would go crazy. Having seen this method work so well for the class I would never make a WR any other way. I have also drafted an edge template so that some of the quilts can be squared and put on a long-arm machine more easily. I can't wait to see them all quilted and hanging in a row! Tips if you are gonna try this method: 1. Make some practise arcs and learn the trick for sewing them together so that the seams sit flat at the intersection of the rings. 2. If you are going to cut your "background" with scissors instead of a rotary cutter, get some serrated scissors. 3. Lots of fabrics in a scrappy arrangement are a lot easier to handle. If you are doing a specific colour arrangement, mark your foundations! Just a thought - I was asked to arrange 40 rings for a 40th anniversary quilt. Arranging 7 X 7 and taking out 3 X 3 from the middle was perfect, and Tracy will quilt entwined initials in the centre panel. The same could be done for 50 (7 X 8 =56 less 2 X 3, or 6 X 9 = 54 less 2 X 2) but the "centre" will be off-centre - if that makes any sense LOL -- Cats ^;;^ ^;;^ ^;;^ ( U ) ( U ) ( U ) Enness Boofhead Donut http://community.webshots.com/user/witchofthewest catsatararatATyahooDOTcomDOTau "Liz A." wrote in message oups.com... :I have one of these and took it out thinking it would help on the : double wedding ring I'm struggling with. Only problem is I can't get it : to work properly like they show it does with drunkards path. So I've : basically just been using the 1/4" edge on it. What trick did you use : on the double wedding ring? I really need to get this thing cranking : because my parent's 50th is the middle of October. : : LizA. : Kent, WA : |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Equipment report: Curvemaster | Tutu Haynes-Smart | Quilting | 12 | January 19th 06 06:52 PM |
OT Curvemaster foot | [email protected] | Quilting | 5 | January 24th 05 07:42 AM |
Curve Master Presser Foot | Flossy | Quilting | 5 | March 27th 04 11:08 AM |
curved presser foot found | nzl* | Quilting | 6 | January 8th 04 01:42 AM |
presser foot | AlenasMom | Quilting | 13 | October 25th 03 04:06 PM |