If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Advice re Sewing Machine
Hello --
I've been lurking awhile, this is my first post. I need to buy an inexpensive, simple, lightweight sewing machine to carry to quilting classes. I presently have an old Singer which works okay but weighs a ton-and-a-half, it's a killer to schlep around. I've seen several inexpensive machines in the stores which I know will not be the greatest machines but for this purpose might be fine. Does anyone have any experience / recommendations? I'm hoping to keep it to under $200... my other ulterior motive for keeping it cheap is that I'm asking Santa for a nice new "real" machine so don't want to spend much in the meantime. Thanks! Cindi |
Ads |
#2
|
|||
|
|||
Advice re Sewing Machine
On Fri, 7 Oct 2011 10:59:40 -0400, CindiA wrote:
I've been lurking awhile, this is my first post. I need to buy an inexpensive, simple, lightweight sewing machine to carry to quilting classes. I presently have an old Singer which works okay but weighs a ton-and-a-half, it's a killer to schlep around. I've seen several Are you going to quilt on this machine , or just piece? Takes a pretty solid machine to quilt, but piecing is less of an issue, since the fabrics are lighter. At under $200, I'd probably be looking at a basic Janome. They also make Kenmore. Something like the Jem series or Magnolia series machines, but they're not going to be happy doing major quilting projects. The Jems are about 12 lbs, the Magnolias about 18. You won't get the needle up/down functions that are useful when you want to piece curves or do Y seams, though. Kay |
#3
|
|||
|
|||
Advice re Sewing Machine
On 10/7/2011 5:42 PM, Kay Lancaster wrote:
On Fri, 7 Oct 2011 10:59:40 -0400, wrote: I've been lurking awhile, this is my first post. I need to buy an inexpensive, simple, lightweight sewing machine to carry to quilting classes. I presently have an old Singer which works okay but weighs a ton-and-a-half, it's a killer to schlep around. I've seen several Are you going to quilt on this machine , or just piece? Takes a pretty solid machine to quilt, but piecing is less of an issue, since the fabrics are lighter. At under $200, I'd probably be looking at a basic Janome. They also make Kenmore. Something like the Jem series or Magnolia series machines, but they're not going to be happy doing major quilting projects. The Jems are about 12 lbs, the Magnolias about 18. You won't get the needle up/down functions that are useful when you want to piece curves or do Y seams, though. A good second-hand machine might be a possibility. |
#4
|
|||
|
|||
Advice re Sewing Machine
Kay, I'll be using it mainly to carry to quilting classes. I'm a beginner so
just piecing for now. I do sew in general, used to sew a lot of clothes but now mostly crafts. So I should be okay with an inexpensive machine, and then have a good machine for bigger jobs. I was looking at a couple of the Brother machines, they have fairly good ratings at Consumers Digest and Consumer Reports. I'll investigate the Janome and Kenmores, as you suggest. Thanks! "Kay Lancaster" wrote in message ... On Fri, 7 Oct 2011 10:59:40 -0400, CindiA wrote: I've been lurking awhile, this is my first post. I need to buy an inexpensive, simple, lightweight sewing machine to carry to quilting classes. I presently have an old Singer which works okay but weighs a ton-and-a-half, it's a killer to schlep around. I've seen several Are you going to quilt on this machine , or just piece? Takes a pretty solid machine to quilt, but piecing is less of an issue, since the fabrics are lighter. At under $200, I'd probably be looking at a basic Janome. They also make Kenmore. Something like the Jem series or Magnolia series machines, but they're not going to be happy doing major quilting projects. The Jems are about 12 lbs, the Magnolias about 18. You won't get the needle up/down functions that are useful when you want to piece curves or do Y seams, though. Kay |
#5
|
|||
|
|||
I have a Janome and love it. With that said my grandmother has the brother sewing emboridery machine combo and just a plain brother emboridery machine. She is the second owner of the brother emboridery machine and it has held up well. So far she has just had to have maintenance done to it.
|
#6
|
|||
|
|||
Advice re Sewing Machine
Just as a follow-up in case anyone is also shopping for a similar machine:
I ended up getting a Brother CE8080. It's working out fine, at least for the purpose for which I bought it (carting to quilting class). It's not a great machine but it sews well and is extremely easy to use, and it's very lightweight. I appreciate all the recommendations, I'll keep them in mind for when I shop for the "good" machine. Thanks all! "CindiA" wrote in message ... Hello -- I've been lurking awhile, this is my first post. I need to buy an inexpensive, simple, lightweight sewing machine to carry to quilting classes. I presently have an old Singer which works okay but weighs a ton-and-a-half, it's a killer to schlep around. I've seen several inexpensive machines in the stores which I know will not be the greatest machines but for this purpose might be fine. Does anyone have any experience / recommendations? I'm hoping to keep it to under $200... my other ulterior motive for keeping it cheap is that I'm asking Santa for a nice new "real" machine so don't want to spend much in the meantime. Thanks! Cindi |
#7
|
|||
|
|||
Advice re Sewing Machine
CindiA wrote:
Just as a follow-up in case anyone is also shopping for a similar machine: I ended up getting a Brother CE8080. It's working out fine, at least for the purpose for which I bought it (carting to quilting class). It's not a great machine but it sews well and is extremely easy to use, and it's very lightweight. I appreciate all the recommendations, I'll keep them in mind for when I shop for the "good" machine. Thanks all! A machine that sells new for $144.97 at Wal-Mart as a "Limited Edition Project Runway" machine? Good luck with that. Let us know if it holds tension after the first week. |
#8
|
|||
|
|||
Advice re Sewing Machine
It's been several weeks and it's holding tension just fine.
And here I thought this was such a welcoming group. "BEI Design" wrote in message ... CindiA wrote: Just as a follow-up in case anyone is also shopping for a similar machine: I ended up getting a Brother CE8080. It's working out fine, at least for the purpose for which I bought it (carting to quilting class). It's not a great machine but it sews well and is extremely easy to use, and it's very lightweight. I appreciate all the recommendations, I'll keep them in mind for when I shop for the "good" machine. Thanks all! A machine that sells new for $144.97 at Wal-Mart as a "Limited Edition Project Runway" machine? Good luck with that. Let us know if it holds tension after the first week. |
#9
|
|||
|
|||
Advice re Sewing Machine
On 10/27/2011 9:55 PM, CindiA wrote:
It's been several weeks and it's holding tension just fine. And here I thought this was such a welcoming group. "BEI Design" wrote in message ... CindiA wrote: Just as a follow-up in case anyone is also shopping for a similar machine: I ended up getting a Brother CE8080. It's working out fine, at least for the purpose for which I bought it (carting to quilting class). It's not a great machine but it sews well and is extremely easy to use, and it's very lightweight. I appreciate all the recommendations, I'll keep them in mind for when I shop for the "good" machine. Thanks all! A machine that sells new for $144.97 at Wal-Mart as a "Limited Edition Project Runway" machine? Good luck with that. Let us know if it holds tension after the first week. It is, Beverly sometimes comes across a bit braash,but underneath she's a pussycat. Just don't cal her Bev. I also suggest you jump over to alt.sewing. there's more going on there and lots of people posting. |
#10
|
|||
|
|||
Advice re Sewing Machine
Juno B wrote:
"BEI Design" wrote CindiA wrote: I ended up getting a Brother CE8080. It's working out fine, at least for the purpose for which ... A machine that sells new for $144.97 at Wal-Mart as a "Limited Edition Project Runway" machine? Good luck with that. Let us know if it holds tension after the first week. It is, Beverly sometimes comes across a bit braash,but underneath she's a pussycat. Just don't cal her Bev. I also suggest you jump over to alt.sewing. there's more going on there and lots of people posting. I'm just a cynic when it comes to $144.00 "sewing machines" from Wal-Mart/Costco/Amazon.com, etc. In the sixties I paid over $700 for my new Singer 401A (which is still in everyday use). http://www.dollartimes.com/calculators/inflation.htm "$700.00 in 1961 had the same buying power as $5,148.50 in 2011." Put another way, $144.00 in 2011 dollars had the same buying power as $19.58 in 1961. I question whether anyone in 1961 would have thought a $19.58 sewing machine would have been a worthwhile investment. I think a good 50-year-old well-maintained mechanical machine would be far better then a new 'plastic miracle' FWIW. -- Beverly http://ickes.us/default.aspx |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sewing machine advice | Betty Maxey | Quilting | 5 | December 6th 05 02:28 PM |
Advice on sewing machine | PFJ | Quilting | 63 | December 24th 04 06:20 PM |
Advice on sewing machine-CP | PFJ | Quilting | 28 | December 20th 04 08:43 PM |
Need advice about a sewing machine | Jalynne | Quilting | 38 | December 14th 04 05:15 AM |
Old Sewing Machine Advice | Diana Curtis | Beads | 9 | August 22nd 03 06:01 AM |