If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Advice for a rookie carver
Hello All,
I havent yet even so much as picked up a carving tool or a carving block. I'm in the process of reading what my local library offers on the subject of carving. My goal is some small architectural carving. Designs in wooden table legs and/or aprons. Corbels for moldings and fireplace surround. I'm also fascinated by wood spirits, green men, etc. and would like to try my hand at that one day. I've enrolled in a 3 session course for beginning carvers at a local carving school and am looking forward to my first class in the middle of September. I do woodworking as a hobby for about 3 years now and am capable of making tables, chairs, jewelry boxes, outdoor furniture among others. My questions: 1) Suggested reading for a beginning carver? 2) Beginners carving tools? 3) Resources for carving tools and sharpening equipment. Thanks for any tips or pointers you may provide. TomL |
Ads |
#2
|
|||
|
|||
Australopithecus scobis wrote in
news On Mon, 29 Aug 2005 15:17:51 +0000, TomL wrote: snip My questions: 1) Suggested reading for a beginning carver? 2) Beginners carving tools? 3) Resources for carving tools and sharpening equipment. Chris Pye. Google for him, and sign up for his e-newsletter. Read all his books. ...and cut some wood. Really. Can't go wrong with Chris Pye.(G) But frankly I would suggest his one book(two books now) Woodcarving, Materials and Equipment is the book(s) to buy right off the top. The type of carving you(TomL)talked can take you in many directions as far as what type of carving tools to buy, best wait till you have done your course before investing too much money in too many tools, Pye's book will give you a good grounding on tools no matter what type of carving you end up doing. So get his book first...like right now.(G) Oh and of course read it! You are embarking on a wonderful edventure. GJP |
#3
|
|||
|
|||
On Mon, 29 Aug 2005 17:57:28 -0500, the opaque Australopithecus scobis
clearly wrote: On Mon, 29 Aug 2005 15:17:51 +0000, TomL wrote: snip My questions: 1) Suggested reading for a beginning carver? 2) Beginners carving tools? 3) Resources for carving tools and sharpening equipment. Chris Pye. Google for him, and sign up for his e-newsletter. Read all his books. ...and cut some wood. Really. He's good, but I like Dick Onians' "Essential Woodcarving Techniques" and Mike Burton's "Architectural Carving: Techniques for Power and Tools" better for Tom's needs. Get the pair for $20.50 used from Amazon. LJ--tool & book collector and rare-occasion carver. -- Like they say, 99% of lawyers give the rest a bad name. ------------------------------------------------------ http://diversify.com Lawyer-free Website Development |
#4
|
|||
|
|||
Thanks to both of you. I had visited that website after doing a search
for suggestions on a basic, beginner carving tool set. Seeing that he suggested a rather expensive Ariou set, which could only be purchased from an overseas Etailer, I moved on. I see now that was a mistake. I spent the better part of last evening downloading his guides and past newsletters. I'm sure I'll be spending a lot more time on the site. Thanks. On Tue, 30 Aug 2005 00:15:13 -0000, Wannabe Wannabe wrote: Australopithecus scobis wrote in news On Mon, 29 Aug 2005 15:17:51 +0000, TomL wrote: snip My questions: 1) Suggested reading for a beginning carver? 2) Beginners carving tools? 3) Resources for carving tools and sharpening equipment. Chris Pye. Google for him, and sign up for his e-newsletter. Read all his books. ...and cut some wood. Really. Can't go wrong with Chris Pye.(G) But frankly I would suggest his one book(two books now) Woodcarving, Materials and Equipment is the book(s) to buy right off the top. The type of carving you(TomL)talked can take you in many directions as far as what type of carving tools to buy, best wait till you have done your course before investing too much money in too many tools, Pye's book will give you a good grounding on tools no matter what type of carving you end up doing. So get his book first...like right now.(G) Oh and of course read it! You are embarking on a wonderful edventure. GJP |
#5
|
|||
|
|||
TomL wrote:
Hello All, I havent yet even so much as picked up a carving tool or a carving block. I'm in the process of reading what my local library offers on the subject of carving. My goal is some small architectural carving. Designs in wooden table legs and/or aprons. Corbels for moldings and fireplace surround. I'm also fascinated by wood spirits, green men, etc. and would like to try my hand at that one day. I've enrolled in a 3 session course for beginning carvers at a local carving school and am looking forward to my first class in the middle of September. I do woodworking as a hobby for about 3 years now and am capable of making tables, chairs, jewelry boxes, outdoor furniture among others. My questions: 1) Suggested reading for a beginning carver? 2) Beginners carving tools? 3) Resources for carving tools and sharpening equipment. Don't buy 'beginners' carving tools. Buy quality stuff, and my favourites are Pfeil and Auriou. http://www.woodcarvingsupply.com/ http://www.woodcraft.com/depts.aspx?DeptID=2263 (expensive...) JES |
#6
|
|||
|
|||
Jan Egil Sjåstad wrote in
: TomL wrote: Hello All, I havent yet even so much as picked up a carving tool or a carving block. I'm in the process of reading what my local library offers on the subject of carving. My goal is some small architectural carving. Designs in wooden table legs and/or aprons. Corbels for moldings and fireplace surround. I'm also fascinated by wood spirits, green men, etc. and would like to try my hand at that one day. I've enrolled in a 3 session course for beginning carvers at a local carving school and am looking forward to my first class in the middle of September. I do woodworking as a hobby for about 3 years now and am capable of making tables, chairs, jewelry boxes, outdoor furniture among others. My questions: 1) Suggested reading for a beginning carver? 2) Beginners carving tools? 3) Resources for carving tools and sharpening equipment. Don't buy 'beginners' carving tools. Buy quality stuff, and my favourites are Pfeil and Auriou. http://www.woodcarvingsupply.com/ http://www.woodcraft.com/depts.aspx?DeptID=2263 (expensive...) JES Again I agree but first buy the book and then my choice would be Henry Taylor's.(G) Wannabe |
#7
|
|||
|
|||
"TomL" wrote in message ... Try the two books by Frederick Wilbur, both are fantastic for architectural carvings. Check out norahall.com also. Her videos are good also. Tools.......H. Taylor, Pfeil or Flexcut. Rick Butz's books cover the type carving in some aspects. |
#8
|
|||
|
|||
Jan Egil Sjåstad wrote:
Don't buy 'beginners' carving tools. Buy quality stuff, and my favourites are Pfeil and Auriou. http://www.woodcarvingsupply.com/ http://www.woodcraft.com/depts.aspx?DeptID=2263 (expensive...) http://www.woodcarvingbiz.com/ JES |
#9
|
|||
|
|||
TomL wrote:
Hello All, I havent yet even so much as picked up a carving tool or a carving block. I'm in the process of reading what my local library offers on the subject of carving. My goal is some small architectural carving. Designs in wooden table legs and/or aprons. Corbels for moldings and fireplace surround. I'm also fascinated by wood spirits, green men, etc. and would like to try my hand at that one day. I've enrolled in a 3 session course for beginning carvers at a local carving school and am looking forward to my first class in the middle of September. I do woodworking as a hobby for about 3 years now and am capable of making tables, chairs, jewelry boxes, outdoor furniture among others. My questions: 1) Suggested reading for a beginning carver? 2) Beginners carving tools? 3) Resources for carving tools and sharpening equipment. =20 Thanks for any tips or pointers you may provide. =20 TomL Lots of Books through Chipping Away and Thompsons Woodcarving, Lee=20 valley -- Plus others -- look at my links page. http://woodwork.pmccl.com/Business/linksbusiness.htm Hope that helps... I got some flexcut palm tools to start -- a little kit -- still got all=20 my fingers and no scars... --=20 Will R. Jewel Boxes and Wood Art http://woodwork.pmccl.com The power of accurate observation is commonly called cynicism by those=20 who have not got it.=94 George Bernard Shaw |
#10
|
|||
|
|||
Jan Egil Sjåstad wrote:
Jan Egil Sjåstad wrote: Don't buy 'beginners' carving tools. Buy quality stuff, and my favourites are Pfeil and Auriou. http://www.woodcarvingsupply.com/ http://www.woodcraft.com/depts.aspx?DeptID=2263 (expensive...) http://www.woodcarvingbiz.com/ http://www.thebestthings.com/newtool...els_auriou.htm |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New to the group and seeking advice on ebay pricing and selling | jesse | Beads | 13 | August 5th 05 06:14 AM |
Beginner hardanger advice | Seanette Blaylock | Needlework | 4 | August 19th 04 11:41 PM |
Advice needed on stores/shopping | koalamom | Needlework | 13 | December 17th 03 12:27 AM |