If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Kiln Wash
Which is better, dry kiln wash or liquid kiln wash? Is there a big
difference? If liquid, what is the ratio of dry mix to water? |
Ads |
#2
|
|||
|
|||
It's generally applied as a liquid, but can be mixed up to a cream
consistency. (Some potters apply a kiln wash dry as a dust to shelves, then brush off after firing. Too much work...) My current favorite is a recipe of 80 % Alumina Hydrate, 20% Ball Clay, which can be applied thinly (Ron Roy recommends prewetting the shelves to keep from having it glob up in application). It works well as a thin coating, and last a long time without getting sticky. Brad Sondahl -- For original art, music, pottery, and literature, visit my homepage http://sondahl.com Pottery sales page http://sondahl.freeyellow.com My music site at mp3.com http://www.mp3.com/stations/sondahl |
#3
|
|||
|
|||
The most common recipe over here is 2 parts by weight Alumina Hydrate, 1
part China Clay (Kaolin), the refractory quality of the latter is a great help. With potentially runny glazes I sieve 80s grade Molochite onto the shelf and comb it level with a hacksaw blade; absorbs a lot of glaze. Steve Bath UK In article , Brad Sondahl writes It's generally applied as a liquid, but can be mixed up to a cream consistency. (Some potters apply a kiln wash dry as a dust to shelves, then brush off after firing. Too much work...) My current favorite is a recipe of 80 % Alumina Hydrate, 20% Ball Clay, which can be applied thinly (Ron Roy recommends prewetting the shelves to keep from having it glob up in application). It works well as a thin coating, and last a long time without getting sticky. Brad Sondahl -- For original art, music, pottery, and literature, visit my homepage http://sondahl.com Pottery sales page http://sondahl.freeyellow.com My music site at mp3.com http://www.mp3.com/stations/sondahl -- Steve Mills Bath UK |
#4
|
|||
|
|||
"L.Mac" wrote in message om... Which is better, dry kiln wash or liquid kiln wash? Is there a big difference? If liquid, what is the ratio of dry mix to water? Most people use a liquid was as suggested mixed to creamy consistency. When applying don't go too thick, use a big house painting brush and apply all in one direction, not quite to the edge of the shelf (you don't want it falling off to the ware below in a glaze firing) However a friend swears by using dry calcined alumina. Just sprinkle on shelf when it is in place and place wears on it. It is particularly good if you have large flat ware that is likely to crack because it allows movement when shrinking happens. You do have to be wary though that you don't drop it in the wrong place, on other ware etc. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Important - Please beware of a company called Bohle | Eric Russell | Glass | 2 | August 23rd 04 07:46 PM |
F/A @ EBAY Electric Kiln | BATMAN.ROBIN | Marketplace | 0 | September 17th 03 10:51 PM |
Raku FAQs | Tom Buck | Pottery | 0 | July 20th 03 04:49 AM |
FAQ:Intro to rec.crafts.pottery | Mishy Lowe | Pottery | 0 | July 18th 03 06:05 AM |
Kiln question | Kalera Stratton | Beads | 13 | July 11th 03 06:35 AM |