If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
dongle
I have a Hus Designer1 embroidery machine and to access the software I need
a parrarell port on my laptop which I do not have,I have tried usb adaptors but the software does not recognize them.I have been told by the company that all I can do is upgrade and+ $, which I am trying to avoid if I can. Thank you in advance Mary.C |
Ads |
#2
|
|||
|
|||
dongle
Mary, I expect this is about as useless a response as you'll ever see.
However - I 'have' seen this problem discussed here before and it can be done. You may have to wait until all the Easter eggs are dyed or you may be able to wander through old posts until you come upon it. There is hope. Polly "Mary Cardakaris" wrote ... I have a Hus Designer1 embroidery machine and to access the software I need a parrarell port on my laptop which I do not have,I have tried usb adaptors but the software does not recognize them.I have been told by the company that all I can do is upgrade and+ $, which I am trying to avoid if I can. Thank you in advance Mary.C |
#3
|
|||
|
|||
dongle
"Mary Cardakaris" wrote in message ... I have a Hus Designer1 embroidery machine and to access the software I need a parrarell port on my laptop which I do not have,I have tried usb adaptors but the software does not recognize them.I have been told by the company that all I can do is upgrade and+ $, which I am trying to avoid if I can. Thank you in advance Mary.C This may be worth a try. http://www.google.com/#sclient=psy&h...a1 1cf684416b -- Ron Anderson A1 Sewing Machine 18 Dingman Rd Sand Lake, NY 12153 http://www.a1sewingmachine.com www.facebook.com/A1SewingMachineSpecialists |
#4
|
|||
|
|||
dongle
Ron Anderson wrote:
"Mary Cardakaris" wrote in message ... I have a Hus Designer1 embroidery machine and to access the software I need a parrarell port on my laptop which I do not have,I have tried usb adaptors but the software does not recognize them.I have been told by the company that all I can do is upgrade and+ $, which I am trying to avoid if I can. Thank you in advance Mary.C This may be worth a try. http://www.google.com/#sclient=psy&h...a1 1cf684416b Useful link Ron. In my case I had to find a USB-to-serial converter, and it took my three tries to finally find one which worked so I could hook up my computer to my Singer XL5000 and the PSW box. And every time I unplug the USB cable, I have to re-install the USB drivers. But it's worth it! :-) -- Beverly http://ickes.us/default.aspx |
Thread Tools | |
Display Modes | |
|
|