![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I'm back with a small problem that I hope you all might help me with. I'm
currently doing some charity knitting of hats, and I've run into a problem with the free pattern I'm using (www.warmwoolies.com) . The hat pattern is very simple and it requires the use of either bulky weight yarn or two strands of worsted weight held together. I am using Lionbrand Fisherman's wool, because I wanted to experiment with Koolaid dyeing (fabulous results, btw). Anyway, the pattern calls for casting on 55 stitches, joining them with either a 10 1/2 circular needle or double points and then knitting in garter stitch for X amount of rows. I then am to increase 1 stitch every 11 stitches for a total of 60 stitches, and then I'm to knit for 7 1/2" in stocking stitch. After that I start the decreases. It seems to me that the particular hat I'm working on is awfully tiny in the circumference department. I measured it at 16" circumference. Because the yarn is doubled and my knitting seems tight, there's not a great deal of stretch to it. My 2 year old, who is small for his age, cannot wear this hat. So now I'm changing the plans for the hat to fit a baby. My question, after that long preamble, is how long should the hat be before I start the decreases? 7 1/2", as originally called for in the pattern, seems awfully long for an infant hat. Is there a rule of thumb for this? I'd love to know what the ratio of circumference to length is for different size heads/hats. Anyone know of a chart where I can reference this kind of information? I plan on making more of them and I thought I'd like to make a variety of sizes. And no, I didn't bother checking gauge. I figured the hat would fit some child. :-) I just didn't reckon on the hat being quite so tiny! Thank you in advance! I read here often and have learned a great deal. Lisa -- "Some people are like Slinkies...not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs." |
Ads |
#2
|
|||
|
|||
![]()
On May 19, 10:21 am, "Karlisa" wrote:
I'm back with a small problem that I hope you all might help me with. I'm currently doing some charity knitting of hats, and I've run into a problem with the free pattern I'm using (www.warmwoolies.com) . The hat pattern is very simple and it requires the use of either bulky weight yarn or two strands of worsted weight held together. I am using Lionbrand Fisherman's wool, because I wanted to experiment with Koolaid dyeing (fabulous results, btw). Anyway, the pattern calls for casting on 55 stitches, joining them with either a 10 1/2 circular needle or double points and then knitting in garter stitch for X amount of rows. I then am to increase 1 stitch every 11 stitches for a total of 60 stitches, and then I'm to knit for 7 1/2" in stocking stitch. After that I start the decreases. It seems to me that the particular hat I'm working on is awfully tiny in the circumference department. I measured it at 16" circumference. Because the yarn is doubled and my knitting seems tight, there's not a great deal of stretch to it. My 2 year old, who is small for his age, cannot wear this hat. So now I'm changing the plans for the hat to fit a baby. My question, after that long preamble, is how long should the hat be before I start the decreases? 7 1/2", as originally called for in the pattern, seems awfully long for an infant hat. Is there a rule of thumb for this? I'd love to know what the ratio of circumference to length is for different size heads/hats. Anyone know of a chart where I can reference this kind of information? I plan on making more of them and I thought I'd like to make a variety of sizes. And no, I didn't bother checking gauge. I figured the hat would fit some child. :-) I just didn't reckon on the hat being quite so tiny! Thank you in advance! I read here often and have learned a great deal. Lisa, I think that maybe this hat is meant to have a brim that you roll up. But, actually, 7.5 inches is not all that long before decreasing. HTH Higs, Katherine |
#3
|
|||
|
|||
![]()
On May 19, 10:21 am, "Karlisa" wrote:
I'm back with a small problem that I hope you all might help me with. I'm currently doing some charity knitting of hats, and I've run into a problem with the free pattern I'm using (www.warmwoolies.com) . The hat pattern is very simple and it requires the use of either bulky weight yarn or two strands of worsted weight held together. I am using Lionbrand Fisherman's wool, because I wanted to experiment with Koolaid dyeing (fabulous results, btw). Anyway, the pattern calls for casting on 55 stitches, joining them with either a 10 1/2 circular needle or double points and then knitting in garter stitch for X amount of rows. I then am to increase 1 stitch every 11 stitches for a total of 60 stitches, and then I'm to knit for 7 1/2" in stocking stitch. After that I start the decreases. It seems to me that the particular hat I'm working on is awfully tiny in the circumference department. I measured it at 16" circumference. Because the yarn is doubled and my knitting seems tight, there's not a great deal of stretch to it. My 2 year old, who is small for his age, cannot wear this hat. So now I'm changing the plans for the hat to fit a baby. My question, after that long preamble, is how long should the hat be before I start the decreases? 7 1/2", as originally called for in the pattern, seems awfully long for an infant hat. Is there a rule of thumb for this? I'd love to know what the ratio of circumference to length is for different size heads/hats. Anyone know of a chart where I can reference this kind of information? I plan on making more of them and I thought I'd like to make a variety of sizes. And no, I didn't bother checking gauge. I figured the hat would fit some child. :-) I just didn't reckon on the hat being quite so tiny! Thank you in advance! I read here often and have learned a great deal. I just clicked on your link and got to a "domain for sale" page, so I couldn't check the pattern itself. If you check the link and re-post, I'll have a look. Higs, Katherine |
#4
|
|||
|
|||
![]()
Oh, so sorry! It's http://www.warmwoolies.org/
That "org" makes such a difference. :-) The photo of the child wearing the hat looks much older than my hat would fit, and they don't show the brim rolled in the photo. I'm thinking I'll trying a different needle size, too. My hat is so dense that it can literally stand by itself without collapsing! Bullet-proof baby hat! thanks again! lisa "Katherine" wrote in message ps.com... On May 19, 10:21 am, "Karlisa" wrote: I'm back with a small problem that I hope you all might help me with. I'm currently doing some charity knitting of hats, and I've run into a problem with the free pattern I'm using (www.warmwoolies.com) . The hat pattern is very simple and it requires the use of either bulky weight yarn or two strands of worsted weight held together. I am using Lionbrand Fisherman's wool, because I wanted to experiment with Koolaid dyeing (fabulous results, btw). Anyway, the pattern calls for casting on 55 stitches, joining them with either a 10 1/2 circular needle or double points and then knitting in garter stitch for X amount of rows. I then am to increase 1 stitch every 11 stitches for a total of 60 stitches, and then I'm to knit for 7 1/2" in stocking stitch. After that I start the decreases. It seems to me that the particular hat I'm working on is awfully tiny in the circumference department. I measured it at 16" circumference. Because the yarn is doubled and my knitting seems tight, there's not a great deal of stretch to it. My 2 year old, who is small for his age, cannot wear this hat. So now I'm changing the plans for the hat to fit a baby. My question, after that long preamble, is how long should the hat be before I start the decreases? 7 1/2", as originally called for in the pattern, seems awfully long for an infant hat. Is there a rule of thumb for this? I'd love to know what the ratio of circumference to length is for different size heads/hats. Anyone know of a chart where I can reference this kind of information? I plan on making more of them and I thought I'd like to make a variety of sizes. And no, I didn't bother checking gauge. I figured the hat would fit some child. :-) I just didn't reckon on the hat being quite so tiny! Thank you in advance! I read here often and have learned a great deal. I just clicked on your link and got to a "domain for sale" page, so I couldn't check the pattern itself. If you check the link and re-post, I'll have a look. Higs, Katherine |
#5
|
|||
|
|||
![]()
Sorry, I didn't check the link I posted. It should be
http://www.warmwoolies.org/ for anyone who is interested and wants to see the hat I'm posting about. lisa |
#6
|
|||
|
|||
![]()
On May 19, 6:55 pm, "Karlisa" wrote:
Oh, so sorry! It'shttp://www.warmwoolies.org/ That "org" makes such a difference. :-) The photo of the child wearing the hat looks much older than my hat would fit, and they don't show the brim rolled in the photo. I'm thinking I'll trying a different needle size, too. My hat is so dense that it can literally stand by itself without collapsing! Bullet-proof baby hat! thanks again! Thanks, Lisa, for the correction. First off, that hat looks way too thick to me. that being said, I would say that the 7.5 inches for the length is correct. Try the larger needles, and see if the result looks better. Let us know what happens. Higs, Katherine |
#7
|
|||
|
|||
![]()
In article ,
Karlisa wrote: I'm back with a small problem that I hope you all might help me with. I'm currently doing some charity knitting of hats, and I've run into a problem with the free pattern I'm using corrected: (www.warmwoolies.org) . The hat pattern is very simple and it requires the use of either bulky weight yarn or two strands of worsted weight held together. snip Anyway, the pattern calls for casting on 55 stitches, joining them with either a 10 1/2 circular needle or double points and then knitting in garter stitch for X amount of rows. I then am to increase 1 stitch every 11 stitches for a total of 60 stitches, and then I'm to knit for 7 1/2" in stocking stitch. After that I start the decreases. This sounds much too tight and small. I have a pattern for a hat that takes US size 11 needles, only one strand of worsted weight, and you cast on 56 stitches at the brim. Doubling the yarn makes it too tight, and bulky weight is much too thick for an adult hat, let alone a child's. I guess the garter stitch is to act like ribbing, and the increase for stockinette is to make the top a little floppy, like a beret. The 7 1/2 inches is all right, and will make a good big hat if you use the larger needles and don't double the yarn. It seems to me that the particular hat I'm working on is awfully tiny in the circumference department. I measured it at 16" circumference. Because the yarn is doubled and my knitting seems tight, there's not a great deal of stretch to it. Some people knit much tighter than others. I think the person who wrote the pattern must be one who knits loosely. 7 1/2", as originally called for in the pattern, seems awfully long for an infant hat. Is there a rule of thumb for this? It would be amazingly long for an infant hat, unless it was a stocking cap. For adults, the length of the hand from finger tips to base is roughly the length from the forehead to the top of the head, but with babies that doesn't work because their hands haven't grown that big yet. And no, I didn't bother checking gauge. I figured the hat would fit some child. :-) I just didn't reckon on the hat being quite so tiny! You have a 2-year-old to use for a gauge. A hat that will just barely stretch to fit him is probably about as small as you want to go, unless you're knitting preemie hats. =Tamar |
#8
|
|||
|
|||
![]()
I have made this hat a couple of times, with one thickness of worsted weight
wool on #8 needles. (I'm pretty sure they were #8s--I don't think I have 10.5 dpns.) Yes, it comes out pretty small, and stands up by itself. It is supposed to keep an infant's head warm in a cold, cold place, and I guess it'll do that. That said, next time I make it, I think I will cast on more, and knit a little longer, so it will have a chance of fitting a two- or three-year-old. Georgia (picture of hat in 3rd row at: http://georgiamorgan.net/html/knitting.htm) "Richard Eney" wrote in message ... In article , Karlisa wrote: I'm back with a small problem that I hope you all might help me with. I'm currently doing some charity knitting of hats, and I've run into a problem with the free pattern I'm using corrected: (www.warmwoolies.org) . The hat pattern is very simple and it requires the use of either bulky weight yarn or two strands of worsted weight held together. snip Anyway, the pattern calls for casting on 55 stitches, joining them with either a 10 1/2 circular needle or double points and then knitting in garter stitch for X amount of rows. I then am to increase 1 stitch every 11 stitches for a total of 60 stitches, and then I'm to knit for 7 1/2" in stocking stitch. After that I start the decreases. This sounds much too tight and small. I have a pattern for a hat that takes US size 11 needles, only one strand of worsted weight, and you cast on 56 stitches at the brim. Doubling the yarn makes it too tight, and bulky weight is much too thick for an adult hat, let alone a child's. I guess the garter stitch is to act like ribbing, and the increase for stockinette is to make the top a little floppy, like a beret. The 7 1/2 inches is all right, and will make a good big hat if you use the larger needles and don't double the yarn. It seems to me that the particular hat I'm working on is awfully tiny in the circumference department. I measured it at 16" circumference. Because the yarn is doubled and my knitting seems tight, there's not a great deal of stretch to it. Some people knit much tighter than others. I think the person who wrote the pattern must be one who knits loosely. 7 1/2", as originally called for in the pattern, seems awfully long for an infant hat. Is there a rule of thumb for this? It would be amazingly long for an infant hat, unless it was a stocking cap. For adults, the length of the hand from finger tips to base is roughly the length from the forehead to the top of the head, but with babies that doesn't work because their hands haven't grown that big yet. And no, I didn't bother checking gauge. I figured the hat would fit some child. :-) I just didn't reckon on the hat being quite so tiny! You have a 2-year-old to use for a gauge. A hat that will just barely stretch to fit him is probably about as small as you want to go, unless you're knitting preemie hats. =Tamar |
#9
|
|||
|
|||
![]() "Georgia" wrote in message news ![]() I have made this hat a couple of times, with one thickness of worsted weight wool on #8 needles. (I'm pretty sure they were #8s--I don't think I have 10.5 dpns.) Yes, it comes out pretty small, and stands up by itself. It is supposed to keep an infant's head warm in a cold, cold place, and I guess it'll do that. That said, next time I make it, I think I will cast on more, and knit a little longer, so it will have a chance of fitting a two- or three-year-old. Thanks for posting the link to your completed hat (I also enjoyed looking at your other completed work!). I used two strands of worsted weight wool because that's what the website specified. I think I'll try keeping it doubled for the next hat and just change needle sizes to see how it turns out. It's a great way to experiment with my knitting because whatever I produce is bound to fit some child in need, right? :-) thanks! Lisa Georgia (picture of hat in 3rd row at: http://georgiamorgan.net/html/knitting.htm) "Richard Eney" wrote in message ... In article , Karlisa wrote: I'm back with a small problem that I hope you all might help me with. I'm currently doing some charity knitting of hats, and I've run into a problem with the free pattern I'm using corrected: (www.warmwoolies.org) . The hat pattern is very simple and it requires the use of either bulky weight yarn or two strands of worsted weight held together. snip Anyway, the pattern calls for casting on 55 stitches, joining them with either a 10 1/2 circular needle or double points and then knitting in garter stitch for X amount of rows. I then am to increase 1 stitch every 11 stitches for a total of 60 stitches, and then I'm to knit for 7 1/2" in stocking stitch. After that I start the decreases. This sounds much too tight and small. I have a pattern for a hat that takes US size 11 needles, only one strand of worsted weight, and you cast on 56 stitches at the brim. Doubling the yarn makes it too tight, and bulky weight is much too thick for an adult hat, let alone a child's. I guess the garter stitch is to act like ribbing, and the increase for stockinette is to make the top a little floppy, like a beret. The 7 1/2 inches is all right, and will make a good big hat if you use the larger needles and don't double the yarn. It seems to me that the particular hat I'm working on is awfully tiny in the circumference department. I measured it at 16" circumference. Because the yarn is doubled and my knitting seems tight, there's not a great deal of stretch to it. Some people knit much tighter than others. I think the person who wrote the pattern must be one who knits loosely. 7 1/2", as originally called for in the pattern, seems awfully long for an infant hat. Is there a rule of thumb for this? It would be amazingly long for an infant hat, unless it was a stocking cap. For adults, the length of the hand from finger tips to base is roughly the length from the forehead to the top of the head, but with babies that doesn't work because their hands haven't grown that big yet. And no, I didn't bother checking gauge. I figured the hat would fit some child. :-) I just didn't reckon on the hat being quite so tiny! You have a 2-year-old to use for a gauge. A hat that will just barely stretch to fit him is probably about as small as you want to go, unless you're knitting preemie hats. =Tamar |
#10
|
|||
|
|||
![]() "Karlisa" wrote in message ... It's a great way to experiment with my knitting because whatever I produce is bound to fit some child in need, right? :-) Exactly! I think I'd better go out and get some more 10.5s! Georgia |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ring sizing | [email protected] | Jewelry | 3 | February 18th 06 07:47 PM |
Sizing v. Starch | joan8904 in Bellevue Nebraska | Quilting | 12 | March 16th 05 08:50 PM |
bracelet sizing, and beads :) | Arleen | Beads | 9 | February 19th 04 10:25 PM |
hat sizing help | bibe | Yarn | 16 | January 25th 04 01:04 AM |
need help with pattern sizing quickly | no spam | Sewing | 2 | January 23rd 04 03:09 PM |