If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
tube tuners
what do you do when the length of material is too long to crunch onto
the tube turner? and the diameter of the fabric is large enough for the tube but when you start crunching it down, it stresses the seam and parts? I using a serger to seam a piece of ribbon for a handle to a purse. 3 thread narrow rolled edge to minimize the width of the seam. maybe i need just a 3 thread narrow overlock? |
Ads |
#2
|
|||
|
|||
tube tuners
klh wrote:
what do you do when the length of material is too long to crunch onto the tube turner? and the diameter of the fabric is large enough for the tube but when you start crunching it down, it stresses the seam and parts? Use something else! I using a serger to seam a piece of ribbon for a handle to a purse. 3 thread narrow rolled edge to minimize the width of the seam. maybe i need just a 3 thread narrow overlock? That would probably do. Chain off a good 12" at the end of the seam. Thread that through a really big tapestry needle (or a blunt doll needle) ans thread it down through the tube, and use it to pull the tube through to the right side out. Or use a loop turner: http://www.sistersanddaughters.com/tools.html -- Kate XXXXXX R.C.T.Q Madame Chef des Trolls Lady Catherine, Wardrobe Mistress of the Chocolate Buttons http://www.katedicey.co.uk Click on Kate's Pages and explore! |
#3
|
|||
|
|||
tube tuners
Or simply sew into the tube a length of chain off or string and pull it out
to turn it. -- Ron Anderson A1 Sewing Machine PO Box 60 Sand Lake, NY 12153 518-469-5133 http://www.a1sewingmachine.com "Kate Dicey" wrote in message ... klh wrote: what do you do when the length of material is too long to crunch onto the tube turner? and the diameter of the fabric is large enough for the tube but when you start crunching it down, it stresses the seam and parts? Use something else! I using a serger to seam a piece of ribbon for a handle to a purse. 3 thread narrow rolled edge to minimize the width of the seam. maybe i need just a 3 thread narrow overlock? That would probably do. Chain off a good 12" at the end of the seam. Thread that through a really big tapestry needle (or a blunt doll needle) ans thread it down through the tube, and use it to pull the tube through to the right side out. Or use a loop turner: http://www.sistersanddaughters.com/tools.html -- Kate XXXXXX R.C.T.Q Madame Chef des Trolls Lady Catherine, Wardrobe Mistress of the Chocolate Buttons http://www.katedicey.co.uk Click on Kate's Pages and explore! |
#4
|
|||
|
|||
tube tuners
Dear Ron,
Actually, you don't have to scrunch up the fabric along the tube. Firmly sew a length of thread to one end of the fabric after sewing it. Make sure that the thread is long enough to come out the other end of the tube. Thread the tube into the fabric. Drop the needle through the tube, and gently start pulling it. Once the turned fabric is visible at the other end of the tube, you can grasp onto it to complete turning it. I once had to turn enough fabric to make panes for 20 Renaissance garments. I used a piece of pipe, and had it turned in no time at all. I have also used straws for tiny items. Why? I had a set of commercial tube turners that we used in class, but my students were so rough on them, the handles came off the hook things that come with the tubes. So we devised this method, improvising when we needed larger or smaller sizes than were in the set. Teri |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
tube tuners | Kenneth L Hamilton | Sewing | 0 | January 29th 06 01:57 AM |
tube tuners | klh | Sewing | 0 | January 29th 06 01:50 AM |
glass tube | skdilts1 | Glass | 6 | March 27th 05 09:55 PM |
Tube Clasps | ellen | Beads | 0 | October 6th 03 02:50 AM |
Writing inside a glass tube | D& M B | Glass | 7 | August 28th 03 08:13 AM |