If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Took a class
So I took my first jewelry class last monday, had a really good time. I
can see why one would spend 3 months on learning to saw. That little jewelers saw has opened up a whole new world to me. I ordered some basic tools from Otto Frei, 2 saw frames 4 dozen blades in a few sizes. Files, pliers, etc. I'm going to get the Rio Grande catalogs too. Even though I think the tools are reasonable priced, I didn't get a lot for $300. matthew ohio |
Ads |
#2
|
|||
|
|||
Took a class
Hi Matthew!
You can't imagine how much you'll spend once you start. It's a different kind of drugs (that's the only one I'm taking - making jewelry). But it's better than coffee. Karine "MatthewK" a écrit dans le message de news: ... So I took my first jewelry class last monday, had a really good time. I can see why one would spend 3 months on learning to saw. That little jewelers saw has opened up a whole new world to me. I ordered some basic tools from Otto Frei, 2 saw frames 4 dozen blades in a few sizes. Files, pliers, etc. I'm going to get the Rio Grande catalogs too. Even though I think the tools are reasonable priced, I didn't get a lot for $300. matthew ohio |
#3
|
|||
|
|||
Took a class
So I took my first jewelry class last monday, had a really good time. I can see why one would spend 3 months on learning to saw. That little jewelers saw has opened up a whole new world to me. I ordered some basic tools from Otto Frei, 2 saw frames 4 dozen blades in a few sizes. Files, pliers, etc. I'm going to get the Rio Grande catalogs too. Even though I think the tools are reasonable priced, I didn't get a lot for $300. matthew ohio This probably isn't the right thread to post this to, but it's as good as any I guess. There's a list called Orchid that you've simply GOT to join! I've been a-jewelin' for 30 years and I learn stuff on there every day. There are some really talented people and sometimes they even post their URL's so you can see their stuff. I met a guy on there who is trying to launch a business selling this magical stuff I like to call Brown's Snake Oil (He calls it BrownPolymer because either his name is Brown or he has it tested as Brown University or both, but it's not brown but rather sorta tan...) Anyway it's an unbelievable substance that I put on my sawblades and it helps me cut straighter and easier and I don't break sawblades hardly at all (and I use 9/0 blades mostly.) (If any of you know where I can get a couple gross of 10/0 blades I'd be most appreciative.) The Orchid list is here http://www.ganoksin.com/invite.htm The Snake Oil god is here Frosty -- Anulos qui animum ostendunt omnes gestemus! |
#4
|
|||
|
|||
Took a class
On Sat, 10 Feb 2007 22:56:54 -0800, in rec.crafts.jewelry Frosty
wrote: So I took my first jewelry class last monday, had a really good time. I can see why one would spend 3 months on learning to saw. That little jewelers saw has opened up a whole new world to me. I ordered some basic tools from Otto Frei, 2 saw frames 4 dozen blades in a few sizes. Files, pliers, etc. I'm going to get the Rio Grande catalogs too. Even though I think the tools are reasonable priced, I didn't get a lot for $300. matthew ohio This probably isn't the right thread to post this to, but it's as good as any I guess. there isn't another better place. Especially considering how often I freely let Hanuman (that list's owner) post notices for it here, or how often I too refer people to it... There's a list called Orchid that you've simply GOT to join! I've been a-jewelin' for 30 years and I learn stuff on there every day. There are some really talented people and sometimes they even post their URL's so you can see their stuff. I met a guy on there who is trying to launch a business selling this magical stuff I like to call Brown's Snake Oil (He calls it BrownPolymer because either his name is Brown or he has it tested as Brown University or both, but it's not brown but rather sorta tan...) Anyway it's an unbelievable substance that I put on my sawblades and it helps me cut straighter and easier and I don't break sawblades hardly at all (and I use 9/0 blades mostly.) Better than rio's burr life products? (If any of you know where I can get a couple gross of 10/0 blades I'd be most appreciative.) Call Allcraft in New York. Tevel (the owner) was special ordering them from Germany. Hercules blades, I think. Really fine, and really fragile, but when you need em, they're way cool. Where'd you find 9/0 blades? The smallest I've seen commonly sold in the U.S. are 8/0s... The Orchid list is here http://www.ganoksin.com/invite.htm The Snake Oil god is here Frosty |
#5
|
|||
|
|||
Took a class
Frosty wrote:
So I took my first jewelry class last monday, had a really good time. I can see why one would spend 3 months on learning to saw. That little jewelers saw has opened up a whole new world to me. I ordered some basic tools from Otto Frei, 2 saw frames 4 dozen blades in a few sizes. Files, pliers, etc. I'm going to get the Rio Grande catalogs too. Even though I think the tools are reasonable priced, I didn't get a lot for $300. matthew ohio This probably isn't the right thread to post this to, but it's as good as any I guess. There's a list called Orchid that you've simply GOT to join! I've been a-jewelin' for 30 years and I learn stuff on there every day. There are some really talented people and sometimes they even post their URL's so you can see their stuff. I met a guy on there who is trying to launch a business selling this magical stuff I like to call Brown's Snake Oil (He calls it BrownPolymer because either his name is Brown or he has it tested as Brown University or both, but it's not brown but rather sorta tan...) Anyway it's an unbelievable substance that I put on my sawblades and it helps me cut straighter and easier and I don't break sawblades hardly at all (and I use 9/0 blades mostly.) (If any of you know where I can get a couple gross of 10/0 blades I'd be most appreciative.) The Orchid list is here http://www.ganoksin.com/invite.htm The Snake Oil god is here Frosty Hey!!, its Sunday morning and its coffee time as well. Its so wet outside im sitting in my living room with the wood fire going well, Time to have a think, So snake oil you say? to lubricate thin saw blades a subject dear to my heart. We do a lot of sawing here, from jewellers piercing size to big band saw size with lotsof different saws in between. To lubricate metal cutting by hand iive allways used a petroleum wax candle as it stays on the blade even if it gets warm. you can use bees wax, or any other lubricating oil. theres a thread cutting compound thats based on stearin ie soap, tho ive not tried that on a jewellers hand saw. Its also usedin the wire drawing industry, so it must be good. Weve cut with our power hack saw, the sort that goes back and forth like a donkey engine and weve used water to keep the blade cool, cutting 3in round bar. So your snake oil could be just about like corn oil Just about any oil would work well. WD 40 is I belive mostly kerosene with a pretty smell. Expensive for what it is. This works too but doesnt last long Finally the previous writer paid nearly $300 for those small tools? they saw them coming. Thed be a quarter of that from the tool suppliers in the Birmingham jewellery quarter tool shops, and not the cheap chinese copies. what do other folks use to lube metal cutting saws? Have a nice day. |
#6
|
|||
|
|||
Took a class
"ted frater" wrote
what do other folks use to lube metal cutting saws? For my piercing blades I normaly use sewing machine oil. Dip the tip of my finger in the reservoir I made for the purpose, run my finger with the drop of oil along the blade (run with the teeth, not against unless you like pain) and cut away. Cheers, Dale. |
#7
|
|||
|
|||
Took a class
On Sun, 11 Feb 2007 10:23:21 +0000, ted frater wrote:
Finally the previous writer paid nearly $300 for those small tools? they saw them coming. Thed be a quarter of that from the tool suppliers in the Birmingham jewellery quarter tool shops, and not the cheap chinese copies. 1 Grobet Swiss Made Adjustable Sawframe-2-3/4" (70mm) Deep 1 German Adjustable Sawframe-4" (100mm) Deep 1 Otto Frei 2/0 Sawblades By The Dozen-12 Pieces $ 4 Otto Frei 4/0 Sawblades By The Dozen-12 Pieces 4 Otto Frei 1/0 Sawblades By The Dozen-12 Pieces 4 Files-Tell Needle-Set Of 6 14CM Cut 2 Medium 1 Files-Half-Round 5 Inch Cut 2 Medium 1 Files-Hand 6 Inch Cut 2 Medium 1 Mandrel-Ring-Graduated High Speed Steel Twist Drill Kit 20 Pcs 1 Otto Frei 5-1/8" Mirror Polished Plier Kit Of 4-1 Each Chain, Flat, Round 1 Mandrel-Bracelet-Round 380mm Long 40mm To 90mm Diameter (15" Long 1-1/2" 1 BENCH PIN AND ANVIL COMBO My total game to 285.00 Do you still think I got hosed? I got the mandrels cause I'm already beating on metal.......didn't need the bench pin/anvil but it seemed convienent. Until I decide exactly what types of benches I want. Already have some coarse files,scribes, punches. All my fine drill bits are gone and I'm sick of using cheap pliers. Maybe I should of bought those individually. I think I did fairly good my self. What should I have done? matthew ohio |
#8
|
|||
|
|||
Took a class
On Sun, 11 Feb 2007 06:57:03 +0000, Frosty wrote:
This probably isn't the right thread to post this to, but it's as good as any I guess. There's a list called Orchid that you've simply GOT to join! I've been reading their archives a lot. I figure I'll subscribe when I really have too. matthew ohio |
#9
|
|||
|
|||
Took a class
On Sun, 11 Feb 2007 09:41:37 -0800, in rec.crafts.jewelry MatthewK
wrote: On Sun, 11 Feb 2007 10:23:21 +0000, ted frater wrote: Finally the previous writer paid nearly $300 for those small tools? they saw them coming. Thed be a quarter of that from the tool suppliers in the Birmingham jewellery quarter tool shops, and not the cheap chinese copies. 1 Grobet Swiss Made Adjustable Sawframe-2-3/4" (70mm) Deep 1 German Adjustable Sawframe-4" (100mm) Deep 1 Otto Frei 2/0 Sawblades By The Dozen-12 Pieces $ 4 Otto Frei 4/0 Sawblades By The Dozen-12 Pieces 4 Otto Frei 1/0 Sawblades By The Dozen-12 Pieces 4 Files-Tell Needle-Set Of 6 14CM Cut 2 Medium 1 Files-Half-Round 5 Inch Cut 2 Medium 1 Files-Hand 6 Inch Cut 2 Medium 1 Mandrel-Ring-Graduated High Speed Steel Twist Drill Kit 20 Pcs 1 Otto Frei 5-1/8" Mirror Polished Plier Kit Of 4-1 Each Chain, Flat, Round 1 Mandrel-Bracelet-Round 380mm Long 40mm To 90mm Diameter (15" Long 1-1/2" 1 BENCH PIN AND ANVIL COMBO My total game to 285.00 Do you still think I got hosed? I got the mandrels cause I'm already beating on metal.......didn't need the bench pin/anvil but it seemed convienent. Until I decide exactly what types of benches I want. Already have some coarse files,scribes, punches. All my fine drill bits are gone and I'm sick of using cheap pliers. Maybe I should of bought those individually. I think I did fairly good my self. What should I have done? matthew ohio Ted might still think so. Some of the Tool dealers in London are pretty cheap. And those of the european made tools you got are probably also cheaper there. Otto Frei is a good dealer. John Frei, one of the owners is an old freind of mine who's sold me many many tools over the years, but since it's usually in person at a SNAG conference or something, I'm usually able to talk him down on the prices some. Unless something is on sale, Frei's pricing is sometimes somewhat higher than some of the other dealers. On the other hand, they tend to carry a somewhat wider range of tools, especially some of the exotic and hard to find things, and in general, their quality is top notch. Some dealers you'll find, especially online, carry a lot of tools of lower or questionable quality. Otto Frei doesn't. If you get it there, you may not get the lowest price on the planet, you can usually be assured you're buying a top notch tool. ...Usually... (grin) But that doesnt' mean you couldn't have spent a good deal less. Some comments follow. Saw frames. Stick with the german made traditional ones. Period. The grobet swiss frame feels wonderful in the hand and is light weight, but frankly, just doesn't work as well. Their funny little set screw thingys don't have enough surface area at their front ends to really hold a saw blade well. OK for the larger blades, but you'll have trouble holding those 4/0 or other finer blades with it. That's annoying. And threading a blade end into that little hole is a lot slower than clamping a blade between the clamp plates of a german frame. Personally, though it may not be worth the money to do it, I'd send the grobet frame back. And are you sure you need two frames anyway? Unless you're sawing to the center of larger pieces of metal, a 2.5 or 3 inch frame might be all you ever need. If you do more, just get used to the 4 inch. Not quite as delicate to use, but will work, if you're trying to watch your budget. Remember, if you're cutting longer strips off the side of a sheet, you can grip a blade with pliers right next to each end where it's clamped, and twist it (the toothless ends of the blades are softer), so then the blade cuts somewhat sideways, allowing you to cut long strips off the side of a sheet with the frame off to the side, rather than inline with the cut. There are sawblades, and then there are sawblades. Some very wide variations in price. Some of the costliest are not really the best for beginners, since they're often tempered to a harder state, making them better for harder metals, or tough to cut metals like platinum, or steel. But for most beginners, a medium quality level blade is just fine, and saves money, since you'll actually break fewer of them. But I've not looked at the frei web site to be sure what you got. So maybe you're fine.... Pliers too, come in a wide range of qualities. You can spend 30 or 40 dollars per pair, or you can spend 5 dollars per pair. While the costly ones are often indeed very nice and will last decades, you often don't need quite that quality. it's amazing how much work you can do with the cheap stainless pakistani pliers for a couple bucks each. My favorite are in general the standard german pliers, which generally are NOT polished. If you shop around, you can get them for under 15 dollars each, and sometimes, the smaller ones as cheap as about 8 bucks. (Tevel, at Allcraft, in New York, always seems to have specials on some cool pliers at amazing prices, at every SNAG convention...) You can even find servicable cheaper pliers at places like Harbor Freight. They'll be lap joint, not box joint, which won't last as long and are a bit less precise for very fine detailed work, but if you need you can spend a bit of time cleaning up the jaws a bit more and end up with nicely workable tools for a couple bucks each. However, I'll agree with you that using nice pliers is nicer. Really cheap ones don't work as well, at least when you buy them. If you learn to modify them and clean them up, many can be made much better. But starting with a good tight box joint plier that's well made to start, is not a bad choice at all. The above modificatnion advice applies less or at least differently to cutters and nippers, though. Pliers can have somewhat softer steel in the jaws and still be fine. It's handy at times, in fact, to be able to modify a plier jaw slightly for a task at hand, an argument in favor of having a small supply on hand of the really cheap pliers, for those jobs where you need to customize a plier jaw and don't want to ruin an expensive pair of lindstroms. but cutters need good steel, tempered correctly, to work at all well. There are many decent ones though, even at your local hardware store. As with the pliers, you can dress up the jaws to improve their accuracy if you need. Many of my precise flush cutting nippers tarted life as plain styles, which I ground down and trimmed a bit to make the cutting jaws more to my liking. Doing that is easy, and can save you half the cost of the tool. Good files are a joy, and make a big difference in what you can do with them, IF you know how to file well. Almost any german or swiss made file will be fine, though, and I've seen some surprisingly good files for ridiculously low prices from Poland and elsewhere in eastern europe. The chinese made files are OK only in the coarse machinist styles for larger work, but certainly are cheap. Drill bits sold via jewelers supply houses are often a bit costly. Check harbor freight's prices, or the prices at machine tools suppliers like Enco or MSC. there's a set on sale now at Harbor Freight for a numbered set, size 1 to 60, for under thirty dollars, I think. Decent drills. And I've found a few sellers on ebay now and then selling small jewelers sized drills by the dozen for very cheap. Chinese or russian made. Not sure which. They seem to work just fine so far, though with the smallest sizes (half millimeter) I break a few more of them than I would with better quality. But like I said, they were VERY cheap. Learn to resharpen small bits. Not hard to do, with care. Small bits get dull quickly, and when dull don't work as well and break easily. You'll get a lot more life out of your bits if you learn to sharpen them. Needs a good magnifier, and use a fine grit seperating disk in a flex shaft to sharpen them. Wiorks well and easily. Get the Rio Grand Catalogs. You will find their prices generally good, often lower than Otto Frei. And check out www.contenti.com. Another good company. not quite as wide a range of tools as Frie, but often very good prices. Another link to know is www.gesswein.com Extremely wide range of products. Prices probably comparible to Otto Frei, not usually lower. Note that for their web site, you MUST use internet explorer. Their menu system doesn't work with the firefox browser. And finally, keep www.Ishor.com in your links too. One of the oldest and largest tools dealers, they've not catered as much to artists and hobbyists, but those in the business know them. They carry a very wide range of stuff, and if you spend some time digging through their site, there's an amazing amount of info there (like, for example, full detailed instructions on gold and silver refining. The best description I've found on the web. But it'll take you some digging to find it.) Their web site, though extensive, is truely a web. Somewhat tangled, and not as easy to navigate, and they don't have a good online ordering system. But worth knowing about anyway. Once you find what you want there, order via the old fashioned way, by phone. And like I said, don't forget www.harborfreight.com for occasional really good buys on cheap chinese tools. Hope that helps. Peter |
#10
|
|||
|
|||
Took a class
On Sun, 11 Feb 2007 18:22:52 +0000, Peter W.. Rowe, wrote:
Saw frames. Stick with the german made traditional ones. Period. The grobet swiss frame feels wonderful in the hand and is light weight, but frankly, just doesn't work as well. I figured they were cheap enough to try two. The 4 inch is more useful to me right now. I'll probably send the swiss one back. Thanks. Really cheap ones don't work as well, at least when you buy them. If you learn to modify them and clean them up, many can be made much better. But starting with a good tight box joint plier that's well made to start, is not a bad choice at all. Thanks for the advice on this, I've never had a lot of luck with cheap pliers. Cheap enough where I can give them a try again though. Good files are a joy, and make a big difference in what you can do with them, IF you know how to file well. Almost any german or swiss made file will be fine, though, and I've seen some surprisingly good files for ridiculously low prices from Poland and elsewhere in eastern europe. The chinese made files are OK only in the coarse machinist styles for larger work, but certainly are cheap. Thats one of the lessons I've got early on. It's funny how many people who've never used a new file. Do you know about the steel differences of the european made files compared to the american ones? I've heard from people in the knifemaking comunity that the new american files aren't as good for making knifes as the old ones. I've heard the new nicholsons have a harder layer of steel at the teeth. Almost case hardened. I'm wondering if the european manufactured ones would be better for knives and such. Need something to do with a worn out file. I pretty much feel files are "disposable". That's also what I've been told by "old" guys. I should of checked my purchases out better. But still don't feel too bad. A lot of the reason I purchased everything from one suplier off the bat was time/convience. I just didn't think of looking through machining type resources. I also should of ordered catalogs a month ago. Took my first class and wanted stuff now...... Thanks, matthew ohio |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Now I've gone and done it! | frood | Quilting | 33 | April 1st 06 12:39 AM |
Class and lecture Sar Nephew Was terrible | She in PA | Quilting | 2 | March 20th 06 10:16 PM |
AD- Organic Beadmaking class with Paulette Insall in Portland, OR | Paulette Insall | Beads | 3 | August 31st 05 04:59 AM |
Louisa Smith class led to design wall (long) | Kathy Applebaum | Quilting | 2 | March 20th 05 04:56 PM |
OT(?) : PMC Class report (long) | KDK | Beads | 13 | August 28th 03 08:36 PM |