A crafts forum. CraftBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CraftBanter forum » Craft related newsgroups » Carving
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

carving pliars



 
 
Thread Tools Display Modes
  #1  
Old October 24th 05, 08:21 PM
Evon Barvinchack
external usenet poster
 
Posts: n/a
Default carving pliars

I was shown a pair of pliers carved from a solid piece of wood. I have tried
to duplicate them - but to no avail. Does any one know how to carve the
hinge? I've tried spliting the wood with my knife and I sawed part wasy with
my band saw - but the wood always breaks before the hinge works. Thank you
in advance,

Evon


Ads
  #2  
Old October 24th 05, 11:20 PM
Wannabe
external usenet poster
 
Posts: n/a
Default carving pliars

"Evon Barvinchack" wrote in
link.net:

I was shown a pair of pliers carved from a solid piece of wood. I have
tried to duplicate them - but to no avail. Does any one know how to
carve the hinge? I've tried spliting the wood with my knife and I
sawed part wasy with my band saw - but the wood always breaks before
the hinge works. Thank you in advance,

Evon




Is your correct e-mail address, if so I'll send
you the instructions and diagrams, or I could upload it to
alt.binaries.pictures.woodworking if you get that newsgroup, which ever
you prefer?

Wannabe
  #3  
Old October 26th 05, 11:28 AM
Evon Barvinchack
external usenet poster
 
Posts: n/a
Default carving pliars

that is my correct address, Thanks in advance for the info.
Wannabe wrote in message
...
"Evon Barvinchack" wrote in
link.net:

I was shown a pair of pliers carved from a solid piece of wood. I have
tried to duplicate them - but to no avail. Does any one know how to
carve the hinge? I've tried spliting the wood with my knife and I
sawed part wasy with my band saw - but the wood always breaks before
the hinge works. Thank you in advance,

Evon




Is your correct e-mail address, if so I'll send
you the instructions and diagrams, or I could upload it to
alt.binaries.pictures.woodworking if you get that newsgroup, which ever
you prefer?

Wannabe



  #4  
Old October 26th 05, 05:49 PM
Wannabe
external usenet poster
 
Posts: n/a
Default carving pliars

"Evon Barvinchack" wrote in news:USI7f.373
:

that is my correct address, Thanks in advance for the info.
Wannabe wrote in message
...
"Evon Barvinchack" wrote in
link.net:

I was shown a pair of pliers carved from a solid piece of wood. I

have
tried to duplicate them - but to no avail. Does any one know how to
carve the hinge? I've tried spliting the wood with my knife and I
sawed part wasy with my band saw - but the wood always breaks

before
the hinge works. Thank you in advance,

Evon




Is your correct e-mail address, if so I'll

send
you the instructions and diagrams, or I could upload it to
alt.binaries.pictures.woodworking if you get that newsgroup, which

ever
you prefer?

Wannabe



I've sent the instructions, but your email ISP is asking for some
idiotic personal ID check which I have tried three times to comply with.
If you want people to try and help with carving info making them jump
through hoops to help you does not bode well for future assistance.
I too get lots of spam but what your ISP has set up will mean I won't
try to help anyone with that ISP address in the future.
Sorry for the rant but my time is more valuable to me spent carving.(G)

Wannabe




  #5  
Old October 26th 05, 07:07 PM
George G
external usenet poster
 
Posts: n/a
Default carving pliers

Hi Wanna - I have been looking for the plier plans also. If it is not
too much bother and trouble, I would appreciate if you sent me same. No
problem if not but would like them. Thank you-------George

  #6  
Old October 26th 05, 08:51 PM
TomL
external usenet poster
 
Posts: n/a
Default carving pliars

On Wed, 26 Oct 2005 16:49:54 -0000, Wannabe Wannabe wrote:

"Evon Barvinchack" wrote in news:USI7f.373
:

that is my correct address, Thanks in advance for the info.
Wannabe wrote in message
...
"Evon Barvinchack" wrote in
link.net:

I was shown a pair of pliers carved from a solid piece of wood. I

have
tried to duplicate them - but to no avail. Does any one know how to
carve the hinge? I've tried spliting the wood with my knife and I
sawed part wasy with my band saw - but the wood always breaks

before
the hinge works. Thank you in advance,

Evon




Is your correct e-mail address, if so I'll

send
you the instructions and diagrams, or I could upload it to
alt.binaries.pictures.woodworking if you get that newsgroup, which

ever
you prefer?

Wannabe



I've sent the instructions, but your email ISP is asking for some
idiotic personal ID check which I have tried three times to comply with.
If you want people to try and help with carving info making them jump
through hoops to help you does not bode well for future assistance.
I too get lots of spam but what your ISP has set up will mean I won't
try to help anyone with that ISP address in the future.
Sorry for the rant but my time is more valuable to me spent carving.(G)

Wannabe




Any chance you could post them here or alt.bin.pictures.woodworking so
all of us can have a look?
  #8  
Old October 26th 05, 11:27 PM
Wannabe
external usenet poster
 
Posts: n/a
Default carving pliars

TomL wrote in news:ggnvl15pn99ojv3vaaku9cng6nke48n1ds@
4ax.com:

On Wed, 26 Oct 2005 16:49:54 -0000, Wannabe Wannabe wrote:

"Evon Barvinchack" wrote in news:USI7f.373
:

that is my correct address, Thanks in advance for the info.
Wannabe wrote in message
...
"Evon Barvinchack" wrote in
link.net:

I was shown a pair of pliers carved from a solid piece of wood. I

have
tried to duplicate them - but to no avail. Does any one know how

to
carve the hinge? I've tried spliting the wood with my knife and I
sawed part wasy with my band saw - but the wood always breaks

before
the hinge works. Thank you in advance,

Evon




Is your correct e-mail address, if so I'll

send
you the instructions and diagrams, or I could upload it to
alt.binaries.pictures.woodworking if you get that newsgroup, which

ever
you prefer?

Wannabe


I've sent the instructions, but your email ISP is asking for some
idiotic personal ID check which I have tried three times to comply

with.
If you want people to try and help with carving info making them jump
through hoops to help you does not bode well for future assistance.
I too get lots of spam but what your ISP has set up will mean I won't
try to help anyone with that ISP address in the future.
Sorry for the rant but my time is more valuable to me spent carving.

(G)

Wannabe




Any chance you could post them here or alt.bin.pictures.woodworking so
all of us can have a look?

Hi TomL, they are over in Alt.Binaries.pictures.woodworking under the
heading "Pliers Carving nstructions Att. george G and TomL.
Had to send page one up separate, for some reason all three pages didn't
arrive at my computer.
If you can't find it Tom let me know.
BTW not sure where I found these , somewhere on the net at one time or
another.(G)

Wannabe.

  #9  
Old October 27th 05, 12:01 AM
TomL
external usenet poster
 
Posts: n/a
Default carving pliars

On Wed, 26 Oct 2005 22:27:47 -0000, Wannabe Wannabe wrote:

TomL wrote in news:ggnvl15pn99ojv3vaaku9cng6nke48n1ds@


Any chance you could post them here or alt.bin.pictures.woodworking so
all of us can have a look?

Hi TomL, they are over in Alt.Binaries.pictures.woodworking under the
heading "Pliers Carving nstructions Att. george G and TomL.
Had to send page one up separate, for some reason all three pages didn't
arrive at my computer.
If you can't find it Tom let me know.
BTW not sure where I found these , somewhere on the net at one time or
another.(G)

Wannabe.


Got 'em. Thanks. Thanks very much.
  #10  
Old October 27th 05, 09:06 AM
George G
external usenet poster
 
Posts: n/a
Default carving pliers

Hi Wanna - Took me some time but I learned a lot. Thank you very much.
George G.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
KARELLA CARVING - Exclusive carved furnishings & home accessories [email protected] Marketplace 0 November 7th 03 04:13 PM
KARELLA CARVING - Exclusive carved furnishings & home accessories [email protected] General Crafting 0 November 7th 03 04:13 PM
Need good source for carving gloves Bill Houdek Carving 3 September 4th 03 04:21 PM
KARELLA CARVING - Exclusive carved furnishings & home accessories [email protected] Marketplace 0 August 25th 03 04:37 PM
carving Joe Kennedy Carving 2 August 5th 03 06:33 PM


All times are GMT +1. The time now is 01:51 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CraftBanter.
The comments are property of their posters.