A crafts forum. CraftBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CraftBanter forum » Textiles newsgroups » Sewing
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

HELP PLEASE with janome 10001 and bobbin problem



 
 
Thread Tools Display Modes
  #1  
Old November 30th 03, 11:43 PM
external usenet poster
 
Posts: n/a
Default HELP PLEASE with janome 10001 and bobbin problem

i just got this &*$%#^!! janome--traded in my 9000 that it took a year
to pay for...the dealer tells me the 10001 will embroider a large
design without my having to piece it together like i do with a smaller
hoop...

i take it home and embroider large designs that don't meet (yet
another MAJOR complaint)--then try a littler one that has a problem
and ends up grinding thread into the bobbin case...

i cleaned everything out and now the needle won't pull the bobbin
thread thru to the top of the needle plate...can anyone help me?
Ads
  #2  
Old December 1st 03, 12:48 AM
Warrior_13
external usenet poster
 
Posts: n/a
Default

I don't have that brand of machine, but is the hoop a multi-position? Did
you move it, or have to move it during the stitch-out? If they design isn't
meeting it sounds like it might be a multi-part design which would require
moving the hoop.
I can only suggest making sure the bobbin is seated correctly. Sometimes
just a hair out of position can cause jams because the hook isn't catching
the thread correctly.
Maybe you'll hear from Janome owners soon and they can help you.
Good luck


  #3  
Old December 1st 03, 01:57 AM
B. Peg
external usenet poster
 
Posts: n/a
Default

Might want to look at the Lessons section of the Janome site.
wrote in message
...
i just got this &*$%#^!! janome--traded in my 9000 that it took a year
to pay for...the dealer tells me the 10001 will embroider a large
design without my having to piece it together like i do with a smaller
hoop...

i take it home and embroider large designs that don't meet (yet
another MAJOR complaint)--then try a littler one that has a problem
and ends up grinding thread into the bobbin case...

i cleaned everything out and now the needle won't pull the bobbin
thread thru to the top of the needle plate...can anyone help me?



  #4  
Old December 1st 03, 02:47 AM
Sew-Sew Lady
external usenet poster
 
Posts: n/a
Default

I have a 9000, and if it behaved like this, especially right after purchase,
I'd haul it right back to the dealer and show them what it's doing. They
should be able to show you what's wrong, etc, and if it's broken, a warranty
should take care of it.

wrote in message
...
i just got this &*$%#^!! janome--traded in my 9000 that it took a year
to pay for...the dealer tells me the 10001 will embroider a large
design without my having to piece it together like i do with a smaller
hoop...

i take it home and embroider large designs that don't meet (yet
another MAJOR complaint)--then try a littler one that has a problem
and ends up grinding thread into the bobbin case...

i cleaned everything out and now the needle won't pull the bobbin
thread thru to the top of the needle plate...can anyone help me?



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:19 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 CraftBanter.
The comments are property of their posters.