If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Machine Quilting Advice needed
Hi, I'm Dawn, and I am a self-professed MQing "failure." I've taken
classes, and practised. I've practised quilting straight lines. I've practised stipple quilting. I've even practised MQing the pattern on the fabric. When I MQ small blocks ( no larger than 24 * 24 inches ), the quilting looks okay. Certainly not great, but definitely okay. Once I try to MQ anything larger, everything that can go wrong, will go wrong. I get puckering, stitches that are not equal in length, even stitches that are so small that they are almost impossible to rip out. Does anyone have any suggestions? Thanks, - dlm. |
Ads |
#2
|
|||
|
|||
Machine Quilting Advice needed
Assuming that the quilt is made of block units, stitch in the ditch
around each block first. That will stabilize the top, bat and bottom so that you're better able to control the pucks and tucks while doing free motion. joan |
#3
|
|||
|
|||
Machine Quilting Advice needed
joan8904 in Bellevue Nebraska wrote:
Assuming that the quilt is made of block units, stitch in the ditch around each block first. That will stabilize the top, bat and bottom so that you're better able to control the pucks and tucks while doing free motion. joan And once you have done this, think of each block/area as a small block, which you can already do. I find I have to remind myself to stop and reposition my hands and/or the quilt often, and not try to keep going until only my elbows and my willpower is controlling the quilt. Hanne in London |
#4
|
|||
|
|||
Machine Quilting Advice needed
Joan and Hanne have weighted it with good advice. I'd
like to add: be sure you have needle DOWN when you stop. AND, it is OKAY to pause and 'regroup' now and then. Good luck. PAT - dlm. wrote: Hi, I'm Dawn, and I am a self-professed MQing "failure." I've taken classes, and practised. I've practised quilting straight lines. I've practised stipple quilting. I've even practised MQing the pattern on the fabric. When I MQ small blocks ( no larger than 24 * 24 inches ), the quilting looks okay. Certainly not great, but definitely okay. Once I try to MQ anything larger, everything that can go wrong, will go wrong. I get puckering, stitches that are not equal in length, even stitches that are so small that they are almost impossible to rip out. Does anyone have any suggestions? Thanks, - dlm. |
#5
|
|||
|
|||
Machine Quilting Advice needed
You sound like a candidate for quilt-as-you-go techniques! Do all those
small blocks, then join together. The puckering is a basting issue. Maybe you stretch the backing? Maybe not enough pins? Or you need more space to the left of the machine to support the weight. (I use my ironing board, lowered to the height of the table.) For even stitch length, maybe you would benefit from one of the new stitch length regulators. Haven't tried it myself, but I know Bernina has one. Maybe others by now. Roberta in D "- dlm." schrieb im Newsbeitrag . .. Hi, I'm Dawn, and I am a self-professed MQing "failure." I've taken classes, and practised. I've practised quilting straight lines. I've practised stipple quilting. I've even practised MQing the pattern on the fabric. When I MQ small blocks ( no larger than 24 * 24 inches ), the quilting looks okay. Certainly not great, but definitely okay. Once I try to MQ anything larger, everything that can go wrong, will go wrong. I get puckering, stitches that are not equal in length, even stitches that are so small that they are almost impossible to rip out. Does anyone have any suggestions? Thanks, - dlm. |
#6
|
|||
|
|||
Machine Quilting Advice needed
Firstly Dawn - you say 'self-professed ... failure'. Therein lies the
trouble. If you are convinced in your mind that you can't do it - then you won't! Can I offer the 'secret' that worked for me? I started with one or two patterns that I discovered I could do fairly well, together with one or two stitches on my machine, plus stitch in the ditch and grid lines. I used that little 'armoury' for a good while, then I began to expand my stitches, and now I have quite a few. I do a lot of painstaking sewing with my walking foot making leaves and flowers - and turning a lot g. I find the walking foot stuff much easier; but I am progressing. I find stippling very hard and my best attempt is if I let myself do what I can, which is to come to a point and then swing back. Keeping everything nicely rounded is almost impossible for me. If you can do a 24" square, then I suggest you settle down with one of the good quilt as you go books and settle on doing that, for the foreseeable. Why make life difficult for yourself, just to do what a lot of people (but not everyone) do? HTH .. In message , - dlm. writes Hi, I'm Dawn, and I am a self-professed MQing "failure." I've taken classes, and practised. I've practised quilting straight lines. I've practised stipple quilting. I've even practised MQing the pattern on the fabric. When I MQ small blocks ( no larger than 24 * 24 inches ), the quilting looks okay. Certainly not great, but definitely okay. Once I try to MQ anything larger, everything that can go wrong, will go wrong. I get puckering, stitches that are not equal in length, even stitches that are so small that they are almost impossible to rip out. Does anyone have any suggestions? Thanks, - dlm. -- Best Regards pat on the hill |
#7
|
|||
|
|||
Machine Quilting Advice needed
Basting spray is your friend: no weight, no puckering, no shifting and 1/10
the time to do. -- Kim Graham http://members.shaw.ca/kigraham Nanaimo, BC, Canada THE WORD IN PATCHWORK "Roberta Zollner" wrote in message ... You sound like a candidate for quilt-as-you-go techniques! Do all those small blocks, then join together. The puckering is a basting issue. Maybe you stretch the backing? Maybe not enough pins? Or you need more space to the left of the machine to support the weight. (I use my ironing board, lowered to the height of the table.) For even stitch length, maybe you would benefit from one of the new stitch length regulators. Haven't tried it myself, but I know Bernina has one. Maybe others by now. Roberta in D "- dlm." schrieb im Newsbeitrag . .. Hi, I'm Dawn, and I am a self-professed MQing "failure." I've taken classes, and practised. I've practised quilting straight lines. I've practised stipple quilting. I've even practised MQing the pattern on the fabric. When I MQ small blocks ( no larger than 24 * 24 inches ), the quilting looks okay. Certainly not great, but definitely okay. Once I try to MQ anything larger, everything that can go wrong, will go wrong. I get puckering, stitches that are not equal in length, even stitches that are so small that they are almost impossible to rip out. Does anyone have any suggestions? Thanks, - dlm. |
#8
|
|||
|
|||
Machine Quilting Advice needed
Dawn, In addition to all the great advice you have received, I have three suggestions: make sure that your basting is close enough to help with the pucker problem, make sure that the portions of the quilt you are not working on are well supported by a table, desk or other stationary object and be sure to BREATHE. Machine quilting does take practice. You can do it! Mary |
#9
|
|||
|
|||
Machine Quilting Advice needed - THANKS!
As always, the advice that I've received on RCTQ is invaluable! I will
certainly give "quilt as you go" a try as soon as I check out the local library for books on the subject. I never thought about proper support for the quilt, so I will give it a whirl on my dining room table. Finally, I will remember to breathe. Maybe that will help to alleviate the discomfort/tenseness that I feel when I attempt MQing. Many thanks, - dlm. in central MA |
#10
|
|||
|
|||
Machine Quilting Advice needed
no one has mentioned how you hold the quilt, I find gloves are an
absolute necessity, then you kind of press down on the quilt with your hands, leaving a square free to sew in, you have to move your hands often, you don't want to pinch your fingers together at all, if you do that, even if you've basted really close together you'll still probably get small puckers. cheers Anne |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Advice needed on Schmetz machine needles | Leslie & The Furbabies in MO. | Quilting | 5 | February 20th 07 03:05 AM |
More quilting advice needed | Shirley Shone | Quilting | 1 | October 28th 06 05:36 PM |
Curvy top quilting advice needed... | hfw | Quilting | 9 | October 4th 04 07:23 PM |
Advice needed on a coverstitch machine | Pampeliska | Quilting | 1 | August 28th 04 12:14 AM |
Advice needed: tying off versus machine quilting. | dogmom | Quilting | 8 | August 12th 03 06:02 PM |