If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Question about slip
The commercial clay menders may be applied to dry greenware and don't crack
while they (menders) are drying. I want to paint slip all over a piece to smooth it out more, but the piece is dry. I've heard that if you mix vinegar with the slip, it behaves similarly to a clay mender. Does anyone know if this works? Would I be able to paint a whole slip coating onto dry clay if the slip is vinegared? I'd appreciate any insight anyone may be able to give. Linda D in TX |
Ads |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
The commercial clay menders may be applied to dry greenware and don't crack while they (menders) are drying. I want to paint slip all over a piece to smooth it out more, but the piece is dry. I've heard that if you mix vinegar with the slip, it behaves similarly to a clay mender. Does anyone know if this works? Would I be able to paint a whole slip coating onto dry clay if the slip is vinegared? I'd appreciate any insight anyone may be able to give. Linda D in TX Your easiest way would be to make sure that your pot is bone dry and dip it into the slip. Make sure you have enough slip to dip the pot in one go. This way you will get an even and smooth coating Regards John W Do I need to add the vinegar? Thanks for your reply. Linda D |
#4
|
|||
|
|||
I have used a vinegar and slip mix to mend, but it was only a small
piece.the vinegar makes the slip go thicker so i do not know about "painting" a piece with this.if as the other person suggested you dip the piece in slip i would first dip the piece in water so the slip will grab more evenly.Maybe you have a piece of waste that you could try it on first.Let us know how you get on. |
#5
|
|||
|
|||
|
#6
|
|||
|
|||
|
#7
|
|||
|
|||
I copied this reactive slip recipe out of Salt-Glaze Ceramics by Rosemary
Cochrane Gerstley Borate 7 Alkaline frit 9 Silica 20 China clay 40 I added 1% copper oxide as I am looking for an oxidised green. The slip was made up to the thickness of milk I have applied this to some green ware and trials are in the kiln at the moment. Beause of the amount of china clay it went on very smoothly when the ware was dipped. The other thought is that if yore looking for a smooth surface have you thought of burnisheing or terra siligata? Regards John W Thanks to all who replied. This piece is very intricately shaped, turned, and twisted into a sort of coral-like sculpture. I put my Balcones White clay (^8-10) into the blender with water. I use the Balcones White, but raku-fire it. I would like to just brush the water-clay mixture on top of it. I think I'll just put in a generous amount of vinegar, too and see what happens. "See what happens" is one of my art watch words... as long as it's not dangerous. Linda D |
#8
|
|||
|
|||
Linda, I am rather new to this art form but a member of my class swears
by vinegar and slip to mend things with no cracks. Daryl O. New Orleans, La Lcdumas wrote: The commercial clay menders may be applied to dry greenware and don't crack while they (menders) are drying. I want to paint slip all over a piece to smooth it out more, but the piece is dry. I've heard that if you mix vinegar with the slip, it behaves similarly to a clay mender. Does anyone know if this works? Would I be able to paint a whole slip coating onto dry clay if the slip is vinegared? I'd appreciate any insight anyone may be able to give. Linda D in TX |
#9
|
|||
|
|||
Could you by chance find out what the mixture is for this "glue"?
We had a really pleasant repair attempt work in our studio. Someone's slab plate had cracked on the edge in the bisque firing (a crack going from the rim down to the bottom of the plate). We fire to cone6 and our glazes and clays are very forgiving. I recommended that she try glazing her piece, taking a thin piece of clay (she made a star so it became decorative), covering the crack with this and then glazing the green clay "bandage". It worked beautifully. I program software and frequently have to come up with unusual solutions. This however is the only "idea" that I am really proud of having worked. DKat (again - so sorry for cross posting folks - it really will go away) "Darylo" wrote in message news:P9Kac.11356$of.9879@lakeread03... Linda, I am rather new to this art form but a member of my class swears by vinegar and slip to mend things with no cracks. Daryl O. New Orleans, La Lcdumas wrote: The commercial clay menders may be applied to dry greenware and don't crack while they (menders) are drying. I want to paint slip all over a piece to smooth it out more, but the piece is dry. I've heard that if you mix vinegar with the slip, it behaves similarly to a clay mender. Does anyone know if this works? Would I be able to paint a whole slip coating onto dry clay if the slip is vinegared? I'd appreciate any insight anyone may be able to give. Linda D in TX |
#10
|
|||
|
|||
vinegar and dry clay powder (same as you use) plus a bit of golden syrup,
just a tad, don't know why it makes the difference but it does..... Oh yeah use on green ware (i have tried it on bisque, and it worked for me but i wouldn't reccommend it...) Hugz Eddie "dkat" wrote in message t... Could you by chance find out what the mixture is for this "glue"? We had a really pleasant repair attempt work in our studio. Someone's slab plate had cracked on the edge in the bisque firing (a crack going from the rim down to the bottom of the plate). We fire to cone6 and our glazes and clays are very forgiving. I recommended that she try glazing her piece, taking a thin piece of clay (she made a star so it became decorative), covering the crack with this and then glazing the green clay "bandage". It worked beautifully. I program software and frequently have to come up with unusual solutions. This however is the only "idea" that I am really proud of having worked. DKat (again - so sorry for cross posting folks - it really will go away) "Darylo" wrote in message news:P9Kac.11356$of.9879@lakeread03... Linda, I am rather new to this art form but a member of my class swears by vinegar and slip to mend things with no cracks. Daryl O. New Orleans, La Lcdumas wrote: The commercial clay menders may be applied to dry greenware and don't crack while they (menders) are drying. I want to paint slip all over a piece to smooth it out more, but the piece is dry. I've heard that if you mix vinegar with the slip, it behaves similarly to a clay mender. Does anyone know if this works? Would I be able to paint a whole slip coating onto dry clay if the slip is vinegared? I'd appreciate any insight anyone may be able to give. Linda D in TX |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
question about hand lotions & polymer clay | Marissa Undercofler | Polymer Clay | 12 | November 5th 04 07:02 PM |
A question for lampworkers | Diana Curtis | Beads | 42 | May 7th 04 07:26 PM |
Not really an AD, but a marketing question, need advice | Kandice Seeber | Beads | 26 | April 4th 04 10:39 AM |
slumping casting question | stephen cartwright | Glass | 9 | February 7th 04 07:44 PM |
de-lurking with a color question | Jennifer Moore | Beads | 8 | August 16th 03 09:42 PM |