If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Bernina: Used 1530 vs new 220
In article
, " wrote: * It does not have a presser foot pressure adjustment, but I think that is also missing on the Auroras. The Auroras (430/440) *do* have a pressure adjustment for the feet. -- Sandy in Henderson, near Las Vegas sw.foster1 (at) gmail (dot) com (remove/change the obvious) http://www.sandymike.net |
Ads |
#12
|
|||
|
|||
Bernina: Used 1530 vs new 220
If she really wants to do a lot of machine quilting later The Janome
1600, Brother 1500, Juki TL-98 are all larger harp machines that are not expensive. They do a good job of MQ'ing and make a good addition for any quilter moving in that direction. She may want a Featherweight or Janome Jem too for classes. No shortage of machines she will want in the future if she gets really into quilting! I wonder about lugging a computer machine around. That just doesn't seem a great idea to me. Taria Julia in MN wrote: That's true if the quilter is going to do the quilting on that machine. If all she is going to do is piece, the smaller machine may be okay. The larger harp area is not so important if all the quilts will be quilted by hand or sent out for quilting. And if she wants to take the machine to classes and retreats, the smaller machine may be perfect. I don't think I'd want to lug a Janome 6600 to a class or retreat. Julia in MN |
#14
|
|||
|
|||
Thanks -- Bernina: Used 1530 vs new 220
In article ,
"Leslie & The Furbabies in MO." wrote: Oh boy! Trading in a used sewing machine is exactly like trading cars. The machines drop in value a huge amount the first year or so. That's why a nearly new used machine is such a great buy- it will usually still have some warranty and be considerably cheaper than brand new- just like trading cars. Exactly. Also, like trading a car, there is that ridiculous numbers game- charge more for what's being purchased so they can give the trade-in a greater value. This includes the 'famous' statement "if you trade it in within a year we'll give you what you paid for it". Ridiculous! It's still a used trade-in... they cannot resell it as new for the same price as a new machine, can they? There's no way they can legitimately give you what you paid for it and remain in business very long. Actually, Leslie, the trade-up policy is a fact at most Bernina places. I took advantage of it a couple of years ago. I'd bought my 440 in March, and by November decided I wanted the 630. My dealer gave me exactly what I'd paid for the 440 in credit toward the 630. My quilting buddy in Phoenix did the same thing at her Bernina dealership -- no problem at all trading up and getting full credit, as long as it was within the first year. -- Sandy in Henderson, near Las Vegas sw.foster1 (at) gmail (dot) com (remove/change the obvious) http://www.sandymike.net |
#15
|
|||
|
|||
Thanks -- Bernina: Used 1530 vs new 220
But, Sandy, think about it. Your trade-in is now an almost 1 yr. old USED
machine. They cannot possibly resell your trade-in for the same price you paid for it. There HAS to be a HUGE built in profit margin on the new machine that is traded for to offset the 'loss' in selling your trade-in at much lower price than a brand new machine just like it. Say you bought your machine for $3K. Then you traded it in on a sm that sells for $5K within the year allowed for trading at full purchase price- you would turn in your machine plus $2K cash to buy the $5K new sm, right? They cannot possibly sell your trade-in for that $3K- what it sold for new. Somewhere they must take the loss on your trade-in.... they'll prolly sell it used for $2K. Where is that difference between the $3K (full purchase price) that they allowed you towards the new machine and the $2K they can resell your trade-in for? They certainly cannot take a $1K loss on every trade-in. It's called an 'over-allowance' in the auto business and that is deducted off the profit on the new one sold. And you can't do that unless you have a large profit margin to absorb that over-allowance/loss- of $1K in this example. I was horrified when buying the TOL Janome included a "free" $4K sewing table. There must be at least a $3-5K built-in profit margin on the TOL sm to 'give away' a sewing desk that they prolly pay $2K each to buy in quantity to turn around and 'give' it away with the TOL sm. Their $3-5 built-in profit margin would be reduced by the $2K that Janome pays for the 'free' sewing desk- therefore, the dealer would 'only' make a profit of $1-3K on the TOL sm- reduced by the cost of the desk- just the same as an over-allowance on a trade-in. Everybody has to make a profit to stay in business. There's no free ride. Wish there was..... Leslie, The Former Accountant, Missy & The Furbabies in MO. "Sandy" wrote in message ... In article , "Leslie & The Furbabies in MO." wrote: Oh boy! Trading in a used sewing machine is exactly like trading cars. The machines drop in value a huge amount the first year or so. That's why a nearly new used machine is such a great buy- it will usually still have some warranty and be considerably cheaper than brand new- just like trading cars. Exactly. Also, like trading a car, there is that ridiculous numbers game- charge more for what's being purchased so they can give the trade-in a greater value. This includes the 'famous' statement "if you trade it in within a year we'll give you what you paid for it". Ridiculous! It's still a used trade-in... they cannot resell it as new for the same price as a new machine, can they? There's no way they can legitimately give you what you paid for it and remain in business very long. Actually, Leslie, the trade-up policy is a fact at most Bernina places. I took advantage of it a couple of years ago. I'd bought my 440 in March, and by November decided I wanted the 630. My dealer gave me exactly what I'd paid for the 440 in credit toward the 630. My quilting buddy in Phoenix did the same thing at her Bernina dealership -- no problem at all trading up and getting full credit, as long as it was within the first year. -- Sandy in Henderson, near Las Vegas sw.foster1 (at) gmail (dot) com (remove/change the obvious) http://www.sandymike.net |
#16
|
|||
|
|||
Thanks -- Bernina: Used 1530 vs new 220
In article ,
"Leslie & The Furbabies in MO." wrote: But, Sandy, think about it. Your trade-in is now an almost 1 yr. old USED machine. They cannot possibly resell your trade-in for the same price you paid for it. There HAS to be a HUGE built in profit margin on the new machine that is traded for to offset the 'loss' in selling your trade-in at much lower price than a brand new machine just like it. I'm absolutely sure you're right, Leslie. But I'm going to have to pay that original price, no matter what, unless I buy a used machine. When I was buying, there were no used ones in the model I wanted, so .... At least I *did* get all of my original purchase price towards the newer one -- some companies have a huge mark-up and then don't give a full-price trade in. I figure it was worth it, in my case. Say you bought your machine for $3K. Then you traded it in on a sm that sells for $5K within the year allowed for trading at full purchase price- you would turn in your machine plus $2K cash to buy the $5K new sm, right? They cannot possibly sell your trade-in for that $3K- what it sold for new. Somewhere they must take the loss on your trade-in.... they'll prolly sell it used for $2K. Where is that difference between the $3K (full purchase price) that they allowed you towards the new machine and the $2K they can resell your trade-in for? They certainly cannot take a $1K loss on every trade-in. It's called an 'over-allowance' in the auto business and that is deducted off the profit on the new one sold. And you can't do that unless you have a large profit margin to absorb that over-allowance/loss- of $1K in this example. I was horrified when buying the TOL Janome included a "free" $4K sewing table. There must be at least a $3-5K built-in profit margin on the TOL sm to 'give away' a sewing desk that they prolly pay $2K each to buy in quantity to turn around and 'give' it away with the TOL sm. Their $3-5 built-in profit margin would be reduced by the $2K that Janome pays for the 'free' sewing desk- therefore, the dealer would 'only' make a profit of $1-3K on the TOL sm- reduced by the cost of the desk- just the same as an over-allowance on a trade-in. Everybody has to make a profit to stay in business. There's no free ride. Wish there was..... Leslie, The Former Accountant, Missy & The Furbabies in MO. -- Sandy in Henderson, near Las Vegas sw.foster1 (at) gmail (dot) com (remove/change the obvious) http://www.sandymike.net |
#17
|
|||
|
|||
Bernina: Used 1530 vs new 220
My Brother 1500 is great but it only does a straight stitch. If anyone
wanted to applique with it they would only have a straight st. available... "Taria" wrote in message news:IMSaj.198$y54.112@trnddc07... If she really wants to do a lot of machine quilting later The Janome 1600, Brother 1500, Juki TL-98 are all larger harp machines that are not expensive. They do a good job of MQ'ing and make a good addition for any quilter moving in that direction. She may want a Featherweight or Janome Jem too for classes. No shortage of machines she will want in the future if she gets really into quilting! I wonder about lugging a computer machine around. That just doesn't seem a great idea to me. Taria Julia in MN wrote: That's true if the quilter is going to do the quilting on that machine. If all she is going to do is piece, the smaller machine may be okay. The larger harp area is not so important if all the quilts will be quilted by hand or sent out for quilting. And if she wants to take the machine to classes and retreats, the smaller machine may be perfect. I don't think I'd want to lug a Janome 6600 to a class or retreat. Julia in MN |
#18
|
|||
|
|||
Thanks -- Bernina: Used 1530 vs new 220
If the 1530 is as heavy as my Bernina930 I wouldn't advise taking it to a
class just because of the weight. I once left the case home and brought just the machine but that was so darn slippery I never did that again. wrote in message ... Thanks for all the good responses so far. I also liked the "heft" of the 1530 over the 210 and 230 they did have in the store. I hadn't thought about having to take it to classes and stuff though. I didn't set them side-by-side, but the harp (I'm guessing this is the round space to the right of the needle, for rolling up stuff and scrunching it through the machine) didn't look any bigger on the 1530 than on the 210 (which should be identical, physically, to the sold- out 220). Does the 1530 have a larger harp? Some responses seem to imply it does. Also, Bev, I figured out RSI and FMQ but you lost me on BSR? It sounds as if she needs to mainly decide on whether or not she likes the track-ball interface, and if she likes it the 1530 is the better of these two machines. Thanks also for not mentioning actual prices, I'll have her look here and maybe follow up. I'm already pushing the budget at this level, and can't really go any higher right now. We were hoping the Bernina would hold it's value, and if she really gets into the quilting she can trade up later. I guess that's another reason I like the used machine over the plastic 220. Thanks again, and Merry Christmas |
#19
|
|||
|
|||
Bernina: Used 1530 vs new 220
I was kind of thinking of adding the straight stitch quilting
type machine along with the original one that does all the fussy stuff. Taria MB wrote: My Brother 1500 is great but it only does a straight stitch. If anyone wanted to applique with it they would only have a straight st. available... "Taria" wrote in message news:IMSaj.198$y54.112@trnddc07... If she really wants to do a lot of machine quilting later The Janome 1600, Brother 1500, Juki TL-98 are all larger harp machines that are not expensive. They do a good job of MQ'ing and make a good addition for any quilter moving in that direction. She may want a Featherweight or Janome Jem too for classes. No shortage of machines she will want in the future if she gets really into quilting! I wonder about lugging a computer machine around. That just doesn't seem a great idea to me. Taria Julia in MN wrote: That's true if the quilter is going to do the quilting on that machine. If all she is going to do is piece, the smaller machine may be okay. The larger harp area is not so important if all the quilts will be quilted by hand or sent out for quilting. And if she wants to take the machine to classes and retreats, the smaller machine may be perfect. I don't think I'd want to lug a Janome 6600 to a class or retreat. Julia in MN |
#20
|
|||
|
|||
Bernina: Used 1530 vs new 220
Taria wrote:
I wonder about lugging a computer machine around. That just doesn't seem a great idea to me. I take my Elna 6003 to retreats and classes. It's my main machine and really all I have to take. The 6003 is computerized, though not the fancy embroidery-type of computerization. Julia in MN -- This message has been scanned for viruses by Norton Anti-Virus http://webpages.charter.net/jaccola/ |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bernina: Used 1530 vs new 220 | [email protected] | Quilting | 37 | December 23rd 07 05:33 PM |
Bernina 440 QE | WitchyStitcher | Quilting | 6 | January 18th 06 12:16 AM |
Help, new Bernina 155 | Polly Esther | Quilting | 9 | May 12th 04 09:33 PM |
Bernina 155? | Polly Esther | Quilting | 10 | May 5th 04 04:46 AM |
Bernina 930 help? | KCK | Quilting | 7 | February 10th 04 02:19 PM |