If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Printing out the SAL
I found when I went to Laura Perin's freebies, that only the latest
freebie would print out when following the instructions on the site. Maybe I missed the instructions for selecting just one pattern. If you encounter the same problem, simply highlight the pattern you want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word document. You can then save and print it. Looking at the instructions, I think I'm going to have to buy some of the ribbon floss since I only have a couple of colours in my stash, and they aren't the ones I want to use. MargW |
#2
|
|||
|
|||
Printing out the SAL
On 3/19/09 9:11 AM, "MargW" wrote:
I found when I went to Laura Perin's freebies, that only the latest freebie would print out when following the instructions on the site. Maybe I missed the instructions for selecting just one pattern. If you encounter the same problem, simply highlight the pattern you want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word document. You can then save and print it. Good hint for people. Looking at the instructions, I think I'm going to have to buy some of the ribbon floss since I only have a couple of colours in my stash, and they aren't the ones I want to use. MargW FWIW, there are a bunch of threads that will work in lieu of the 1/16" ribbon floss. I'm in the midst of getting Yahoo to load the photos I took of 8 colorways, with a couple of sub-variations. Instead of ribbon floss I used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays, and 1/16 Kreinik ribbon. Personally, I just don't like working with the riboon floss, and find the PSR nicer to work with. Ellice |
#3
|
|||
|
|||
Printing out the SAL
ellice wrote:
On 3/19/09 9:11 AM, "MargW" wrote: I found when I went to Laura Perin's freebies, that only the latest freebie would print out when following the instructions on the site. Maybe I missed the instructions for selecting just one pattern. If you encounter the same problem, simply highlight the pattern you want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word document. You can then save and print it. Good hint for people. Looking at the instructions, I think I'm going to have to buy some of the ribbon floss since I only have a couple of colours in my stash, and they aren't the ones I want to use. MargW FWIW, there are a bunch of threads that will work in lieu of the 1/16" ribbon floss. I'm in the midst of getting Yahoo to load the photos I took of 8 colorways, with a couple of sub-variations. Instead of ribbon floss I used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays, and 1/16 Kreinik ribbon. Personally, I just don't like working with the riboon floss, and find the PSR nicer to work with. Ellice Thanks, Ellice: I suspect that is what I'll end up doing. I have lots of different fibers to play with, so I'm sure I can come up with something that works. MargW |
#4
|
|||
|
|||
Printing out the SAL
On 3/19/09 3:41 PM, "MargW" wrote:
ellice wrote: On 3/19/09 9:11 AM, "MargW" wrote: I found when I went to Laura Perin's freebies, that only the latest freebie would print out when following the instructions on the site. Maybe I missed the instructions for selecting just one pattern. If you encounter the same problem, simply highlight the pattern you want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word document. You can then save and print it. Good hint for people. Looking at the instructions, I think I'm going to have to buy some of the ribbon floss since I only have a couple of colours in my stash, and they aren't the ones I want to use. MargW FWIW, there are a bunch of threads that will work in lieu of the 1/16" ribbon floss. I'm in the midst of getting Yahoo to load the photos I took of 8 colorways, with a couple of sub-variations. Instead of ribbon floss I used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays, and 1/16 Kreinik ribbon. Personally, I just don't like working with the riboon floss, and find the PSR nicer to work with. Ellice Thanks, Ellice: I suspect that is what I'll end up doing. I have lots of different fibers to play with, so I'm sure I can come up with something that works. MargW You're welcome. I've no doubt you'll find something fun! Also, I just uploaded into the files section a 2 page file of the various colorways I pulled. Supposedly, Yahoo is sending a message to the group, but who knows. I'm still having trouble uploading the photos. ellice |
#5
|
|||
|
|||
Printing out the SAL
"ellice" wrote in message ... On 3/19/09 3:41 PM, "MargW" wrote: ellice wrote: On 3/19/09 9:11 AM, "MargW" wrote: I found when I went to Laura Perin's freebies, that only the latest freebie would print out when following the instructions on the site. Maybe I missed the instructions for selecting just one pattern. If you encounter the same problem, simply highlight the pattern you want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word document. You can then save and print it. Good hint for people. Looking at the instructions, I think I'm going to have to buy some of the ribbon floss since I only have a couple of colours in my stash, and they aren't the ones I want to use. MargW FWIW, there are a bunch of threads that will work in lieu of the 1/16" ribbon floss. I'm in the midst of getting Yahoo to load the photos I took of 8 colorways, with a couple of sub-variations. Instead of ribbon floss I used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays, and 1/16 Kreinik ribbon. Personally, I just don't like working with the riboon floss, and find the PSR nicer to work with. Ellice Thanks, Ellice: I suspect that is what I'll end up doing. I have lots of different fibers to play with, so I'm sure I can come up with something that works. MargW You're welcome. I've no doubt you'll find something fun! Also, I just uploaded into the files section a 2 page file of the various colorways I pulled. Supposedly, Yahoo is sending a message to the group, but who knows. I'm still having trouble uploading the photos. ellice I only saw one photo and when I tried to get the PDF file I got a message saying it wasn't "Accessible." |
#6
|
|||
|
|||
Printing out the SAL
On Mar 19, 4:24 pm, "lucille" wrote:
"ellice" wrote in message ... On 3/19/09 3:41 PM, "MargW" wrote: ellice wrote: On 3/19/09 9:11 AM, "MargW" wrote: I found when I went to Laura Perin's freebies, that only the latest freebie would print out when following the instructions on the site. Maybe I missed the instructions for selecting just one pattern. If you encounter the same problem, simply highlight the pattern you want, ^C (control+C for copy), and paste it (^V - Control+V) into a Word document. You can then save and print it. Good hint for people. Looking at the instructions, I think I'm going to have to buy some of the ribbon floss since I only have a couple of colours in my stash, and they aren't the ones I want to use. MargW FWIW, there are a bunch of threads that will work in lieu of the 1/16" ribbon floss. I'm in the midst of getting Yahoo to load the photos I took of 8 colorways, with a couple of sub-variations. Instead of ribbon floss I used either Petite Sparkle Rays, Fyrewerks (slightly bigger), Neon Rays, and 1/16 Kreinik ribbon. Personally, I just don't like working with the riboon floss, and find the PSR nicer to work with. Ellice Thanks, Ellice: I suspect that is what I'll end up doing. I have lots of different fibers to play with, so I'm sure I can come up with something that works. MargW You're welcome. I've no doubt you'll find something fun! Also, I just uploaded into the files section a 2 page file of the various colorways I pulled. Supposedly, Yahoo is sending a message to the group, but who knows. I'm still having trouble uploading the photos. ellice I only saw one photo and when I tried to get the PDF file I got a message saying it wasn't "Accessible." I can view the photos, but the files come up as unaccessible. Donna in Virginia |
#7
|
|||
|
|||
Printing out the SAL
On 3/19/09 4:24 PM, "lucille" wrote:
"ellice" wrote in message ... On 3/19/09 3:41 PM, "MargW" wrote: ellice wrote: *snip* MargW You're welcome. I've no doubt you'll find something fun! Also, I just uploaded into the files section a 2 page file of the various colorways I pulled. Supposedly, Yahoo is sending a message to the group, but who knows. I'm still having trouble uploading the photos. ellice I only saw one photo and when I tried to get the PDF file I got a message saying it wasn't "Accessible." I have no idea what the issue is with the files. But I may re-upload them in a while. Hopefully someone else will check that they can see them - one is pdf, the other Word. WRT pictures - I'm almost done uploading, and then will re-organize the album. Yahoo is being finicky. Ellice |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Printing help? | Johanna Gibson | Quilting | 3 | January 22nd 08 02:39 PM |
Printing on fabric | Julianne Seekel | Quilting | 4 | November 27th 05 06:46 PM |
Printing my own fabrics. | Wendys | Quilting | 11 | June 8th 05 07:04 PM |
?s re fabric printing | Kellie J. Berger | Quilting | 15 | June 15th 04 03:42 PM |
Printing | Bud Spotts | Marketplace | 1 | December 28th 03 04:44 PM |