A crafts forum. CraftBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » CraftBanter forum » Textiles newsgroups » Sewing
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Need Help with Singer 615U



 
 
Thread Tools Display Modes
  #1  
Old July 31st 06, 03:07 PM
silverlight silverlight is offline
Junior Member
 
First recorded activity by CraftBanter: Jul 2006
Posts: 2
Default Need Help with Singer 615U

I was recently given a Singer 615U that appears to have never been used, although it does not have a manual with it. I have not sewn in over 10 years, so I pretty much don't know anything about sewing anymore. I have heard that many of the old Singer models are really good and durable because of their metal components. I believe this one is "one of the good ones", but I'm not at all attached to it. Could anyone give me some advice- is this particular machine worth anything? What year is it? etc. I have not been able to find any info on it at all. I'm wondering if I should sell it and get one that's easier for a novice like me to figure out, or if I'd be a fool to sell it. I'd appreciate any help!!
Ads
  #2  
Old August 2nd 06, 02:41 PM posted to rec.crafts.textiles.sewing
[email protected]
external usenet poster
 
Posts: 41
Default Need Help with Singer 615U


silverlight wrote:
I was recently given a Singer 615U that appears to have never been used,
although it does not have a manual with it. I have not sewn in over 10
years, so I pretty much don't know anything about sewing anymore. I
have heard that many of the old Singer models are really good and
durable because of their metal components. I believe this one is "one
of the good ones", but I'm not at all attached to it. Could anyone give
me some advice- is this particular machine worth anything? What year is
it? etc. I have not been able to find any info on it at all. I'm
wondering if I should sell it and get one that's easier for a novice
like me to figure out, or if I'd be a fool to sell it. I'd appreciate
any help!!
silverlight

---
I bought an old SInger 31-15 which had been converted from treadle
to electric. I believe it had been used in a factory. All it does is
sew a straight stitch--you turn the sewing work to back-stitch/ lock
threads. Doesn't get much more basic than that, but it handles heavy
weight bulky fabric layers quite well. If I remember right, I paid
about $100.00 for the machine and a huge cutting table, about 10 years
ago.(I'm too lazy to go check the particulars.)
The old machines don't bring a lot of money, as their functions are
so limited. Everyone wants bells and whistles, a wide range of
functions, new and shiny.
The old metal machines, if properly maintained--given regular oiling
and cleaning--go on forever, and can be very useful for sewing bulky
items, upholstery, and long runs of drapery and curtain fabrics. My
31-15 makes a particularly long stitch, which is preferable for such
sewing.
I would suppose your keeping the machine depends upon whether you do
such sewing, enough to warrant giving the machine house room. I'd
suggest you play with it, see if there are things you like about the
machine. If not, you'll probably find someone who likes the oldies
enough to take it off your hands. Just don't expect to make your
fortume in heavy metals.
Cea

  #3  
Old December 7th 07, 06:59 PM posted to rec.crafts.textiles.sewing
blueyes917
external usenet poster
 
Posts: 1
Default Need Help with Singer 615U

blueyes917 had written this in response to
http://www.sewgirls.com/textiles/Re-...615U-1897-.htm :
I have a Singer 615U. It was purchased second-hand by my mother in the
early 70's. I HAVE THE INSTRUCTION MANUAL and all accessories including
case. The manual contains, among many other things, instructions for
oiling the machine, which must be done in at least 10 locations. I have
had this machine repaired many times as it goes out of adjustment pretty
easily. Once I had the gears replaced for $150. I have never had a Singer
that was easy to us and I will be buying an electronic machine this
holiday season (probably a Janome.) I use a sewing machine for altering
and repairs only. If anyone has any suggestions about what to purchase, I
would appreciate knowing them.
-------------------------------------
wrote:

silverlight wrote:
I was recently given a Singer 615U that appears to have never been
used,
although it does not have a manual with it. I have not sewn in
over 10
years, so I pretty much don't know anything about sewing anymore.
I
have heard that many of the old Singer models are really good and
durable because of their metal components. I believe this one is
"one
of the good ones", but I'm not at all attached to it. Could
anyone give
me some advice- is this particular machine worth anything? What
year is
it? etc. I have not been able to find any info on it at all. I'm
wondering if I should sell it and get one that's easier for a
novice
like me to figure out, or if I'd be a fool to sell it. I'd
appreciate
any help!!
silverlight
---

I bought an old SInger 31-15 which had been converted from treadle
to electric. I believe it had been used in a factory. All it does is
sew a straight stitch--you turn the sewing work to back-stitch/ lock
threads. Doesn't get much more basic than that, but it handles heavy
weight bulky fabric layers quite well. If I remember right, I paid
about $100.00 for the machine and a huge cutting table, about 10 years
ago.(I'm too lazy to go check the particulars.)
The old machines don't bring a lot of money, as their functions are
so limited. Everyone wants bells and whistles, a wide range of
functions, new and shiny.
The old metal machines, if properly maintained--given regular oiling
and cleaning--go on forever, and can be very useful for sewing bulky
items, upholstery, and long runs of drapery and curtain fabrics. My
31-15 makes a particularly long stitch, which is preferable for such
sewing.
I would suppose your keeping the machine depends upon whether you do
such sewing, enough to warrant giving the machine house room. I'd
suggest you play with it, see if there are things you like about the
machine. If not, you'll probably find someone who likes the oldies
enough to take it off your hands. Just don't expect to make your
fortume in heavy metals.
Cea







##-----------------------------------------------##
Delivered via
http://www.sewgirls.com/
Sewing Community of the Net
Web and RSS access to your favorite newsgroup -
rec.crafts.textiles.sewing - 3090 messages and counting!
##-----------------------------------------------##
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: MUST HAVE Access. for Singer FW's, Quilters, Doll Makers, etc. singer_fw_iron_lover Marketplace 0 September 2nd 04 09:10 PM
FS: MUST HAVE Great Singer FW Accessory for Quilters, Doll Makers, etc. singer_fw_iron_lover Marketplace 0 September 2nd 04 09:08 PM
FS: Vintage Singer Featherweight Iron -- Best Piecing Iron Available! singer_fw_iron_lover Marketplace 0 August 14th 04 08:10 PM
FS: Vintage Singer Featherweight Iron -- Best Piecing Iron Available! singer_fw_iron_lover Marketplace 0 August 14th 04 08:09 PM
fs&fa FOR PERFECT QUILT PIECING the Little Known Most Popular Singer Featherweight Vintage Accessory! singer_fw_iron_lover Marketplace 0 August 9th 04 04:30 PM


All times are GMT +1. The time now is 06:14 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CraftBanter.
The comments are property of their posters.