If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
making roof tiles look like slate
Hi,
My wife is new to the hobby of dolls houses. She is currently building the roof of her town house and wants to make it look like slates, but the kit cam with plywood strips that are slotted to look like indiviual tiles. Teh question is, how do you paint/decorate this plywood to simulate slate? Many thanks Garry & Michelle |
Ads |
#2
|
|||
|
|||
Garry & Michelle Widley wrote:
Hi, My wife is new to the hobby of dolls houses. She is currently building the roof of her town house and wants to make it look like slates, but the kit cam with plywood strips that are slotted to look like indiviual tiles. The question is, how do you paint/decorate this plywood to simulate slate? In general, you don't. There are imitation slates (I see them more for model railroads than dollhouses, but they do exist). Trying to paint wood to look like stone is a lesson in futility ... yes, eventually you might get it to work, but it certainly wouldn't be worth the effort. There are some stone-finish paints available ("Sandstone" from Deco-Art, for example) that look like rough concrete, but I don't think that's the effect you're looking for. For a small amount of slate (enough for about 9 inches) for overlapped caps on a sloping wall, I used REAL slate - about an eighth of an inch thick, cut to size with a diamond sawblade on a mini-band-saw. The slate came from the top of an aquarium tank - circa 1960. It was in our "this might come in useful some day" collection. - Herb |
#3
|
|||
|
|||
Try this with one of the strips to see if you like the effect, Paint/ stain
flat dark gray and drybrush lighter & darker shades and bits of rusty browns, off-greens, etc, like you sometimes see in real slate. My personal favorite tip to simulate slate was to do a sort of paper-mache with layers of torn black construction paper and chalk and seal the "slates" with a flat-finish sealer. "Garry & Michelle Widley" wrote My wife is ... currently building the roof of her town house and wants to make it look like slates, but the kit cam with plywood strips that are slotted to look like indiviual tiles. Teh question is, how do you paint/decorate this plywood to simulate slate? |
#4
|
|||
|
|||
I used "simulated slate" for my dollhouses. Although they don't look like
real slate, I think they look fairly nice. They're not very expensive (I don't think) and they come on a strip rather than individual pieces. Real slate is expensive and can make the house heavy if you need to use a lot. If you want to email me your address I can send you a sample I had left over from my houses. For obvious reasons I don't want to post my email addy here but instead will give you the link to my webmail form and you can contact me that way. http://www.spminiatures.com/emailform.html Carol S P Miniatures http://www.spminiatures.com "Garry & Michelle Widley" wrote in message . .. Hi, My wife is new to the hobby of dolls houses. She is currently building the roof of her town house and wants to make it look like slates, but the kit cam with plywood strips that are slotted to look like indiviual tiles. Teh question is, how do you paint/decorate this plywood to simulate slate? Many thanks Garry & Michelle |
#5
|
|||
|
|||
Herb,
Could the slate be cut any thinner? Is 1/8 in thick in scale (1/12) or did it look a little thick. Also, how heavy was the roof. I would love to use real slate but the above concerns me - particularly the weight - as I am using extremely lightweight construction - aluminum and foam board rather than plywood. Pat "Herb" wrote in message ... Garry & Michelle Widley wrote: Hi, My wife is new to the hobby of dolls houses. She is currently building the roof of her town house and wants to make it look like slates, but the kit cam with plywood strips that are slotted to look like indiviual tiles. The question is, how do you paint/decorate this plywood to simulate slate? In general, you don't. There are imitation slates (I see them more for model railroads than dollhouses, but they do exist). Trying to paint wood to look like stone is a lesson in futility ... yes, eventually you might get it to work, but it certainly wouldn't be worth the effort. There are some stone-finish paints available ("Sandstone" from Deco-Art, for example) that look like rough concrete, but I don't think that's the effect you're looking for. For a small amount of slate (enough for about 9 inches) for overlapped caps on a sloping wall, I used REAL slate - about an eighth of an inch thick, cut to size with a diamond sawblade on a mini-band-saw. The slate came from the top of an aquarium tank - circa 1960. It was in our "this might come in useful some day" collection. - Herb |
#6
|
|||
|
|||
For what we used it for, 1/8" (= approx 1½ scale inches) was just fine,
and it was what we already had on hand. I have no idea what kind of equipment it would take to slice it thinner - I know that *I* couldn't/wouldn't want to do it! This was a good scale for capstones on a fence. For roofing, it should be much thinner, and probably wedge-shaped. I'm not sure it's possible with real slate - some alternate product would probably be much more suitable. I've found a good selection of materials at the better model train supply places. - Herb Pat wrote: Herb, Could the slate be cut any thinner? Is 1/8 in thick in scale (1/12) or did it look a little thick. Also, how heavy was the roof. I would love to use real slate but the above concerns me - particularly the weight - as I am using extremely lightweight construction - aluminum and foam board rather than plywood. Pat "Herb" wrote in message ... Garry & Michelle Widley wrote: Hi, My wife is new to the hobby of dolls houses. She is currently building the roof of her town house and wants to make it look like slates, but the kit cam with plywood strips that are slotted to look like indiviual tiles. The question is, how do you paint/decorate this plywood to simulate slate? In general, you don't. There are imitation slates (I see them more for model railroads than dollhouses, but they do exist). Trying to paint wood to look like stone is a lesson in futility ... yes, eventually you might get it to work, but it certainly wouldn't be worth the effort. There are some stone-finish paints available ("Sandstone" from Deco-Art, for example) that look like rough concrete, but I don't think that's the effect you're looking for. For a small amount of slate (enough for about 9 inches) for overlapped caps on a sloping wall, I used REAL slate - about an eighth of an inch thick, cut to size with a diamond sawblade on a mini-band-saw. The slate came from the top of an aquarium tank - circa 1960. It was in our "this might come in useful some day" collection. - Herb |
#7
|
|||
|
|||
i was fortunate to aquire a large box of Formica samples at our local flea
market (for free no less!!) These same samples can be found at large home stores (home depot and lowes) in the kitchen section for choosing countertops. i had a couple thousand of these cute 2" x 3" samples-but only had 5 (or so) of each color--thats not good for anything...but on the reverse of the color samples is an unfinished side. I cut each tile in half with scissors, laid them out and they look identical to a slate roof!!! Some have brown backs, but most have slate gray backs--and in various colors too!!! just stop in the kitchen counter section every time you go to the home store and pickup 10 or so EVERY time you go and you'll have a collection going before you know it. It takes couple hundred to do half an average size houses roof. charlene Maryland |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
AD: Purple Spotted Tiles | JavaGirlBT | Beads | 4 | November 8th 04 05:44 PM |
Boston Area Jewelry Making classes! Yippee! | lgreene | Beads | 2 | August 11th 04 11:23 PM |
making molds...progress report! | Sjpolyclay | Beads | 10 | July 17th 04 07:59 AM |
"Making Glass Beads" + referral? | meijhana | Beads | 6 | February 13th 04 07:48 PM |
For those who want to know.. Making Beach Glass With Your Tumbler! | Harry | Beads | 7 | December 22nd 03 08:19 PM |