If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Brother sewing machines
My wife is looking for a new sewing machine. She finally gave up on
the Singer that we bought just after we were married 35 1/2 years ago. I dropped it off at St. Vincent de Paul's last week after she spent a frustrating day with it and told me "to get it out of the house." The look in her eyes did not make it appropriate to suggest we should again take it in to be serviced. She says she doesn't want to buy anything expensive and is looking at a used Brother XR-46c or XR-52c. She says she plans on using it for simple hemming and mending, some work with window coverings, etc. She wants something relatively portable with a case (hence the two mentioned above). We live out in the boonies of northern Wisconsin and there are NO sewing machine dealers within 60 miles (okay, I know most of you are probably women out there and I don't want you to get on my case thinking I keep her locked up in the house and never take her anywhere because we do get to the larger towns frequently, certainly at least once a month when I get around to hooking the dogs up to the sled.). Do any of you have any experience with either of these machines or basically with the Brother brand? Your help would certainly be appreciated. |
Ads |
#2
|
|||
|
|||
I have a Brother 2002D and a Brother PC6000 and I absolutely LOVE both of
them. Bought them both on the internet...........couldn't be more pleased with both. Have never had to have either one serviced, although I am careful and clean them.............I am not affiliated in any way..........just a happy customer. "G. Carlson" wrote in message ... My wife is looking for a new sewing machine. She finally gave up on the Singer that we bought just after we were married 35 1/2 years ago. |
#3
|
|||
|
|||
Well, I hate to be a "wet blanket", but my D-I-L had a Brother
machine, bought new and could never get the tensions right. Dealer was no help either. I have had two Brother combination embroidery machines and they were not good either. Would not buy a Brother machine of anyt kind. Of course, that is just me... Hate to see anybody buy one of these and have the problems we had. Good luck... TIZME On Mon, 02 Feb 2004 22:10:51 -0600, G. Carlson wrote: My wife is looking for a new sewing machine. She finally gave up on the Singer that we bought just after we were married 35 1/2 years ago. I dropped it off at St. Vincent de Paul's last week after she spent a frustrating day with it and told me "to get it out of the house." The look in her eyes did not make it appropriate to suggest we should again take it in to be serviced. She says she doesn't want to buy anything expensive and is looking at a used Brother XR-46c or XR-52c. She says she plans on using it for simple hemming and mending, some work with window coverings, etc. She wants something relatively portable with a case (hence the two mentioned above). We live out in the boonies of northern Wisconsin and there are NO sewing machine dealers within 60 miles (okay, I know most of you are probably women out there and I don't want you to get on my case thinking I keep her locked up in the house and never take her anywhere because we do get to the larger towns frequently, certainly at least once a month when I get around to hooking the dogs up to the sled.). Do any of you have any experience with either of these machines or basically with the Brother brand? Your help would certainly be appreciated. |
#4
|
|||
|
|||
I have a Brother 8500 and I absolutely love it. I'm a very happy Brother
customer. Carol "G. Carlson" wrote in message ... My wife is looking for a new sewing machine. She finally gave up on the Singer that we bought just after we were married 35 1/2 years ago. I dropped it off at St. Vincent de Paul's last week after she spent a frustrating day with it and told me "to get it out of the house." The look in her eyes did not make it appropriate to suggest we should again take it in to be serviced. She says she doesn't want to buy anything expensive and is looking at a used Brother XR-46c or XR-52c. She says she plans on using it for simple hemming and mending, some work with window coverings, etc. She wants something relatively portable with a case (hence the two mentioned above). We live out in the boonies of northern Wisconsin and there are NO sewing machine dealers within 60 miles (okay, I know most of you are probably women out there and I don't want you to get on my case thinking I keep her locked up in the house and never take her anywhere because we do get to the larger towns frequently, certainly at least once a month when I get around to hooking the dogs up to the sled.). Do any of you have any experience with either of these machines or basically with the Brother brand? Your help would certainly be appreciated. |
#5
|
|||
|
|||
My wife is looking for a new sewing machine. She finally gave up on the Singer that we bought just after we were married 35 1/2 years ago. I dropped it off at St. Vincent de Paul's last week after she spent a frustrating day with it and told me "to get it out of the house." The look in her eyes did not make it appropriate to suggest we should again take it in to be serviced. She says she doesn't want to buy anything expensive and is looking at a used Brother XR-46c or XR-52c. Why not spend a few extra dollars on a quality new machine, that will probably last another 35 years, rather than a used one with an unknown history, that may just cause even more frusration? Think of it as a long term investment. Roger -- Yarn Forward Your On Line Yarn Store http://www.yarnforward.com |
#6
|
|||
|
|||
Chip's Mom wrote:
I have a Brother 8500 and I absolutely love it. I'm a very happy Brother customer. That's an electronic model, right? I believe the quality of the electronic machines (who are made by somebody else, I forget who) is a lot better than the quality of their low-end mechanical machines (who are made by the cheapest bidder) -- I know God will not give me anything I can't handle. I just wish that He didn't trust me so much. - Mother Teresa |
#7
|
|||
|
|||
Yarn Forward wrote:
Why not spend a few extra dollars on a quality new machine, that will probably last another 35 years, rather than a used one with an unknown history, that may just cause even more frusration? Think of it as a long term investment. Sometimes someone doesn't have $1000 to plunk down on a good brand-new machine and they have to buy used. Melinda, who would probably not buy either of the Brother machines the original poster mentioned but would go with a 60s or 70s vintage machine because most machines were better built in those days -- I know God will not give me anything I can't handle. I just wish that He didn't trust me so much. - Mother Teresa |
#8
|
|||
|
|||
Quite true. I wouldn't trade my 401 or 99k for any new (home) machine. If I
were to buy a new one, it would be an industrial. "Melinda Meahan - take out TRASH to reply" wrote in message Melinda, who would probably not buy either of the Brother machines the original poster mentioned but would go with a 60s or 70s vintage machine because most machines were better built in those days -- I know God will not give me anything I can't handle. I just wish that He didn't trust me so much. - Mother Teresa |
#9
|
|||
|
|||
Yep.
"IMS" wrote in message ... Me, too! I have two 401s they are the best there is. They can keep electronic/computerized...give me a basic yet powerful machine that can do everything I need it to including fixing it myself.... On Wed, 4 Feb 2004 10:05:05 -0800, "CW" wrote: Quite true. I wouldn't trade my 401 or 99k for any new (home) machine. If I were to buy a new one, it would be an industrial. "Melinda Meahan - take out TRASH to reply" wrote in message Melinda, who would probably not buy either of the Brother machines the original poster mentioned but would go with a 60s or 70s vintage machine because most machines were better built in those days -- I know God will not give me anything I can't handle. I just wish that He didn't trust me so much. - Mother Teresa ------------------------ Adult: A person who has stopped growing at both ends and is now growing in the middle. |
#10
|
|||
|
|||
You can buy a new, quality machine for a few hundred dollars, not thousands.
Roger Melinda Meahan - take out TRASH to reply wrote: Yarn Forward wrote: Why not spend a few extra dollars on a quality new machine, that will probably last another 35 years, rather than a used one with an unknown history, that may just cause even more frusration? Think of it as a long term investment. Sometimes someone doesn't have $1000 to plunk down on a good brand-new machine and they have to buy used. Melinda, who would probably not buy either of the Brother machines the original poster mentioned but would go with a 60s or 70s vintage machine because most machines were better built in those days -- Yarn Forward Your On Line Yarn Store http://www.yarnforward.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sewing Machine FAQ | Diana Curtis | Quilting | 2 | January 24th 05 06:57 PM |
Sewing Machine FAQ | Diana Curtis | Quilting | 0 | November 2nd 04 11:47 PM |
Sewing Machine FAQ | Diana Curtis | Quilting | 0 | September 1st 04 02:30 PM |
FAQ's on buying a new Sewing Machine | Butterfly | Quilting | 0 | October 17th 03 04:34 PM |