If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ready made curtains: creases due to packaging
Every time I buy ready-made curtains they come out of the pack with
deep creases on them, where the curtain has been folded. I invariably have to spend a lot of time ironing them to get the unsightly Last night it took me 2hrs to iron a pair of 66inch x 72 inch drop polycotton curtains, using an iron and a damp cloth. Any ways round this horrible job -- I am buying some 90 inch x 72 inch curtains soon for the lounge! Bruce |
Ads |
#3
|
|||
|
|||
If they are a poly / cotton blend ( maybe for the kitchen or bedroom ) I
hang them and then use a spray bottle of water, set on a fine mist. They usually dry with no crease. HTH Barbara in FL & SC : Every time I buy ready-made curtains they come out of the pack with deep creases on them, Hang them creased and puff steam at the creases out of the iron. For really creased areas, hold them taut while puffing the steam at them. and explore! |
#4
|
|||
|
|||
If they are a poly / cotton blend ( maybe for the kitchen or bedroom ) I hang them and then use a spray bottle of water, set on a fine mist. They usually dry with no crease. HTH Barbara in FL & SC : Every time I buy ready-made curtains they come out of the pack with deep creases on them, Hang them creased and puff steam at the creases out of the iron. For really creased areas, hold them taut while puffing the steam at them. and explore! Thanks. I suppose the best option is to buy made-to-measure curtains which arrive carefully pressed and folded. Incidentally, my bedroom window is 108 ins wide x 60 ins drop. Every curtain shop I went in advised me to buy *at least* 90 in x 72 in curtains, but I have found the 66 in x 72 in, with minimum gather, look fine for a bedroom. I suppose it depends how much gather you need for the curtain. My lounge curtains will need more. Bruce Bruce |
#5
|
|||
|
|||
ready? lazy/desperate method--i toss them in the dryer on "delicate" along
with a damp towel, wetted and wrung out as tightly as i can. i let it run only long enough to let them tumble with the dampness and have a short "ride". when they are taken out, it has to be quickly, so no new wrinkles set in, and hung either on the line, or folded gently--but the dryer has been my friend in this for a long time! admom |
#6
|
|||
|
|||
I'm with you on this one! If the curtains are 'washable' I toss them in the
dryer with a few damp towels and let them tumble for awhile and then just take them out and hang them up. So far this has worked fine for me. The last time I did this I had 6 sheer panels to go up on my living room window. I just took one panel at a time out of the dryer and let the rest tumble as I put each in turn on the rod. Twenty minutes from start to finish and not a wrinkle in sight. I got rod pocket curtains for my bedroom, poly/cotton, with matching bed skirt and shams, they all got the dryer treatment as well and they look great without being touched with an iron. I just got a new Maytag front load stack unit and it has a "wrinkle release" cycle. Now I don't even have to check, it has a lovely little tone that softly bongs when the wrinkles are gone........how does it know that??? And the soft little bong tone just makes me smile because it brings back my childhood dream of being an elevator lady. When I was a very little girl I remember shopping at Fredrick & Nelson's in Seattle. It was always quite a special occasion. Always had to wear my little hat and Sunday gloves, since it was very important to always be a lady back then. We'd go to the department store and all the sales ladies were dressed in black with pearls and the store smelled so good. I just loved riding in the elevators. I was absolutely enthralled with elevator ladies with their perky hats and white gloves, they were the most beautiful women I could imagine being ~sigh~ When you were in the elevator she'd say "Floor please?" then you'd hear the soft 'bong, bong' and she'd have her little stick to swing back and forth across the doorway as it closed and say, "Step back, please step to the back" in this lovely soft voice. ( I used to practice this particular technique in the hallway coat closet with a wooden spoon for hours on end, calling out the floors as I opened and closed the door, must have drove my mother nutz! LOL) They were always impeccably groomed, wore lovely gray suits with matching little pill box hats and white blouses and gloves, single pearl earrings and beautiful patent leather heels and seams in their stockings. There was also the niftiest little fold down stool in her corner and one of the ladies used to let me sit on it. Lordy, I would be just thrilled! You have no idea the disappointment I had when I found out there were no more elevator ladies and my dreams of a career were totally shattered. Oh, the disappointments of childhood. Still mourning, Val "admom" wrote in message ... ready? lazy/desperate method--i toss them in the dryer on "delicate" along with a damp towel, wetted and wrung out as tightly as i can. i let it run only long enough to let them tumble with the dampness and have a short "ride". when they are taken out, it has to be quickly, so no new wrinkles set in, and hung either on the line, or folded gently--but the dryer has been my friend in this for a long time! admom |
#7
|
|||
|
|||
Val, what a charming tale. I can so see you, pretending to be an
elevator lady in your closet! When I was in the fifth grade, Mother/Santa gave me a Barbie Fashion Show, which was really not much more than a painted cardboard stage-like thing. I spent hours upon hours scheming, and designing the various outfits for the fashion shows. Also, when I was a girl the local paper's society editor used to describe each bride's going-away outfit in the announcement of her wedding. I remember plotting out all the accessories (pill box hat, clutch bag, kidskin gloves, patent leather belt, etc.) for each outfit. It was excellent training for becoming a "lady" someday. That's what childhood should be about--pretending, and "trying on" all kinds of different roles. I wonder if today's kids, like my nephews who sit in front of the TV all day long playing their video games, will have such rich fantasy lives. Karen Maslowski in Ohio Valkyrie wrote: hilarious bit of childhood memory snipped You have no idea the disappointment I had when I found out there were no more elevator ladies and my dreams of a career were totally shattered. Oh, the disappointments of childhood. Still mourning, Val |
#8
|
|||
|
|||
Valkyrie wrote: I'm with you on this one! If the curtains are 'washable' I toss them in the dryer with a few damp towels and let them tumble for awhile and then just take them out and hang them up. So far this has worked fine for me. The last time I did this I had 6 sheer panels to go up on my living room window. I just took one panel at a time out of the dryer and let the rest tumble as I put each in turn on the rod. Twenty minutes from start to finish and not a wrinkle in sight. Sounds a good method. Unfortunately, I don't have a tumble dryer. Bruce |
#9
|
|||
|
|||
toss them over the shower rod and leave them for a while. Sometimes,
the creases will hang out. wrote: Every time I buy ready-made curtains they come out of the pack with deep creases on them, where the curtain has been folded. I invariably have to spend a lot of time ironing them to get the unsightly Last night it took me 2hrs to iron a pair of 66inch x 72 inch drop polycotton curtains, using an iron and a damp cloth. Any ways round this horrible job -- I am buying some 90 inch x 72 inch curtains soon for the lounge! Bruce |
#10
|
|||
|
|||
Maureen Wozniak wrote: toss them over the shower rod and leave them for a while. Sometimes, the creases will hang out. Yabut, you have to remember to run hot water in the shower... ;-) |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
HOW RUBBER STAMPS ARE MADE & how i made $$$ - I AM SELLING MY MACHINE AND METAL SHEETS | Nintendo DS 4 Sale | Rubberstamps | 3 | November 28th 04 12:28 PM |
Ot combining Embroidery as ready made parts | Mirjam Bruck-Cohen | Needlework | 1 | April 4th 04 12:14 PM |