If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
HELP PLEASE with janome 10001 and bobbin problem
i just got this &*$%#^!! janome--traded in my 9000 that it took a year
to pay for...the dealer tells me the 10001 will embroider a large design without my having to piece it together like i do with a smaller hoop... i take it home and embroider large designs that don't meet (yet another MAJOR complaint)--then try a littler one that has a problem and ends up grinding thread into the bobbin case... i cleaned everything out and now the needle won't pull the bobbin thread thru to the top of the needle plate...can anyone help me? |
Ads |
#2
|
|||
|
|||
I don't have that brand of machine, but is the hoop a multi-position? Did
you move it, or have to move it during the stitch-out? If they design isn't meeting it sounds like it might be a multi-part design which would require moving the hoop. I can only suggest making sure the bobbin is seated correctly. Sometimes just a hair out of position can cause jams because the hook isn't catching the thread correctly. Maybe you'll hear from Janome owners soon and they can help you. Good luck |
#3
|
|||
|
|||
Might want to look at the Lessons section of the Janome site.
wrote in message ... i just got this &*$%#^!! janome--traded in my 9000 that it took a year to pay for...the dealer tells me the 10001 will embroider a large design without my having to piece it together like i do with a smaller hoop... i take it home and embroider large designs that don't meet (yet another MAJOR complaint)--then try a littler one that has a problem and ends up grinding thread into the bobbin case... i cleaned everything out and now the needle won't pull the bobbin thread thru to the top of the needle plate...can anyone help me? |
#4
|
|||
|
|||
I have a 9000, and if it behaved like this, especially right after purchase,
I'd haul it right back to the dealer and show them what it's doing. They should be able to show you what's wrong, etc, and if it's broken, a warranty should take care of it. wrote in message ... i just got this &*$%#^!! janome--traded in my 9000 that it took a year to pay for...the dealer tells me the 10001 will embroider a large design without my having to piece it together like i do with a smaller hoop... i take it home and embroider large designs that don't meet (yet another MAJOR complaint)--then try a littler one that has a problem and ends up grinding thread into the bobbin case... i cleaned everything out and now the needle won't pull the bobbin thread thru to the top of the needle plate...can anyone help me? |
#5
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|