If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
I always do mitered corners. I find it easier for me to miter than to
control the bulk and get all the ends finished neatly. Julia in MN Lisa Ellis wrote: juliasb(nospam) wrote: I do binding sometimes with mitered corners and other times with straight corners. Much depends on the quilt and what it is I want to achieve. I am 'assuming that mitering the corners is the more preferred way, but is it really considered 'wrong' to do a straight binding? Any thoughts are welcome. What do others do with the corners? Rounded corners are no problem for me...but maybe for others... juliasb I always do straight corners. Mitered corners may score higher with judges and quilt police but straight ones are so much easier. lisae -- This message has been scanned for viruses by Norton Anti-Virus http://mail.chartermi.net/~jaccola/ |
Ads |
#2
|
|||
|
|||
I have always disliked the square corner method, because of the bulk,
and because my stitches closing the final 'gap' always look so very obvious to me. So I persevered with the continuous mitred ones. However, I recently saw someone doing square corners where she seamed the last edge *inside* before turning it to the back. I intend to try that out, as it would often save me having to have joins in my binding - and try to make sure that those joins don't happen at the corners. I never thought one was a 'better' way than the other - just what I could manage to make look better. .. In article , Lisa Ellis writes I always do straight corners. Mitered corners may score higher with judges and quilt police but straight ones are so much easier. lisae -- Best Regards pat on the hill |
#3
|
|||
|
|||
There is a well-known quilter who lives in this area whose quilts often
win things and her 'trade mark' is her rounded corners. I have always been wary of trying them, in case it would look like imitation! but sometimes they might be just the thing. Anyone got any views on when a quilt would look good with rounded corners? .. In article , "juliasb(nospam)" writes I do binding sometimes with mitered corners and other times with straight corners. Much depends on the quilt and what it is I want to achieve. I am 'assuming that mitering the corners is the more preferred way, but is it really considered 'wrong' to do a straight binding? Any thoughts are welcome. What do others do with the corners? Rounded corners are no problem for me...but maybe for others... juliasb -- Best Regards pat on the hill |
#4
|
|||
|
|||
Hullo Julia
If you are having a bulk problem with mitred corners, it might be that you have the turn-in going the same way, front and back? Have a look next time you do one; and notice which way the front turn-in goes, then make the back turn-in go the other way. The front one happens almost automatically, but you are very much in control of the back one, so you can make it go where you want. If they go in opposite directions, you won't find much bulk at all. .. In article , "juliasb(nospam)" writes I keep trying to make the miters better all the time but it seems when I do them I have more bulk than with straight off corners. hummm... I will have to keep on practicing. juliasb -- Best Regards pat on the hill |
#5
|
|||
|
|||
binding question
I do binding sometimes with mitered corners and other times with
straight corners. Much depends on the quilt and what it is I want to achieve. I am 'assuming that mitering the corners is the more preferred way, but is it really considered 'wrong' to do a straight binding? Any thoughts are welcome. What do others do with the corners? Rounded corners are no problem for me...but maybe for others... juliasb -- come and journey with me... from darkness into New Life http:\\www.nwlife.com |
#6
|
|||
|
|||
When I do straight corners, I usually trim some of the excess material
after sewing the binding on. As I normally sew the binding down by hand, it is easy enought to throw a few stiches in to 'close the gap.' If any one notices them, they haven't told me. I like to think my quilts are wonderful enough that they aren't looking too closely at the details. lisae Patti wrote: I have always disliked the square corner method, because of the bulk, and because my stitches closing the final 'gap' always look so very obvious to me. So I persevered with the continuous mitred ones. However, I recently saw someone doing square corners where she seamed the last edge *inside* before turning it to the back. I intend to try that out, as it would often save me having to have joins in my binding - and try to make sure that those joins don't happen at the corners. I never thought one was a 'better' way than the other - just what I could manage to make look better. . In article , Lisa Ellis writes I always do straight corners. Mitered corners may score higher with judges and quilt police but straight ones are so much easier. lisae |
#7
|
|||
|
|||
I keep trying to make the miters better all the time but it seems when I
do them I have more bulk than with straight off corners. hummm... I will have to keep on practicing. juliasb Julia in MN wrote: I always do mitered corners. I find it easier for me to miter than to control the bulk and get all the ends finished neatly. Julia in MN Lisa Ellis wrote: juliasb(nospam) wrote: I do binding sometimes with mitered corners and other times with straight corners. Much depends on the quilt and what it is I want to achieve. I am 'assuming that mitering the corners is the more preferred way, but is it really considered 'wrong' to do a straight binding? Any thoughts are welcome. What do others do with the corners? Rounded corners are no problem for me...but maybe for others... juliasb I always do straight corners. Mitered corners may score higher with judges and quilt police but straight ones are so much easier. lisae -- come and journey with me... from darkness into New Life http:\\www.nwlife.com |
#8
|
|||
|
|||
Patti wrote:
There is a well-known quilter who lives in this area whose quilts often win things and her 'trade mark' is her rounded corners. I have always been wary of trying them, in case it would look like imitation! but sometimes they might be just the thing. Anyone got any views on when a quilt would look good with rounded corners? . In article , "juliasb(nospam)" writes I do binding sometimes with mitered corners and other times with straight corners. Much depends on the quilt and what it is I want to achieve. I am 'assuming that mitering the corners is the more preferred way, but is it really considered 'wrong' to do a straight binding? Any thoughts are welcome. What do others do with the corners? Rounded corners are no problem for me...but maybe for others... juliasb -- Best Regards pat on the hill There are some in a book on borders and bindings that I have, and they are lovely. -- Kate XXXXXX Lady Catherine, Wardrobe Mistress of the Chocolate Buttons http://www.diceyhome.free-online.co.uk Click on Kate's Pages and explore! |
#9
|
|||
|
|||
Try making your binding a tad bit wider.......sometimes that helps when
going around the corner. Betty "Patti" wrote in message ... Hullo Julia If you are having a bulk problem with mitred corners, it might be that you have the turn-in going the same way, front and back? Have a look next time you do one; and notice which way the front turn-in goes, then make the back turn-in go the other way. The front one happens almost automatically, but you are very much in control of the back one, so you can make it go where you want. If they go in opposite directions, you won't find much bulk at all. . In article , "juliasb(nospam)" writes I keep trying to make the miters better all the time but it seems when I do them I have more bulk than with straight off corners. hummm... I will have to keep on practicing. juliasb -- Best Regards pat on the hill |
#10
|
|||
|
|||
I always measure to be sure that doesn't happen. You can always adjust where
you start attaching the binding. Betty "The Nielands" wrote in message news:4Ba3b.276829$YN5.187933@sccrnsc01... I always do mitered corners, but that's just what I prefer. The only time I don't like 'em is when I end up with a seam (in the binding) at the corner. That can be a real pain! Louise in Iowa "juliasb(nospam)" wrote in message ... I do binding sometimes with mitered corners and other times with straight corners. Much depends on the quilt and what it is I want to achieve. I am 'assuming that mitering the corners is the more preferred way, but is it really considered 'wrong' to do a straight binding? Any thoughts are welcome. What do others do with the corners? Rounded corners are no problem for me...but maybe for others... juliasb -- come and journey with me... from darkness into New Life http:\\www.nwlife.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Newbie question - drilling stones | Polly Stewart | Jewelry | 0 | January 11th 05 07:21 AM |
A question for lampworkers | Diana Curtis | Beads | 42 | May 7th 04 07:26 PM |
Not really an AD, but a marketing question, need advice | Kandice Seeber | Beads | 26 | April 4th 04 10:39 AM |
Question on lampwork beads | Cheryl | Beads | 18 | February 19th 04 05:07 AM |
New Way of Binding | Kathy Applebaum | Quilting | 6 | July 12th 03 07:20 PM |