If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
What sewing machine should I buy?
Hi everybody,
I'm about to start doing more sewing, and am in need of a new machine (I'm still using my mothers first Singer she bought in the early 1960s!). I used to sew and design costumes and clothing in college (28 years ago - gack!), but have only done an occasional project since then, which is why I could get by with the Singer. My plans are to sew mostly simple garments from natural fabrics, cotton weave, cotton knits, silks, etc. I also want to roll hem silk -- I am a silk painter, and would love to make my own scarves. I don't need to quilt or do fancy embroidery, but I'd love something that is simple to use and produces elegant results (I have hand problems, so easy is important). I'm willing to spend up to $400 or so. Less would be better, but I don't want to skimp and be sorry later. What do you wise and helpful people suggest? Thanks you! Elizabeth |
Ads |
#2
|
|||
|
|||
What sewing machine should I buy?
In article ,
E in MN wrote: Hi everybody, I'm about to start doing more sewing, and am in need of a new machine (I'm still using my mothers first Singer she bought in the early 1960s!). I used to sew and design costumes and clothing in college (28 years ago - gack!), but have only done an occasional project since then, which is why I could get by with the Singer. My plans are to sew mostly simple garments from natural fabrics, cotton weave, cotton knits, silks, etc. I also want to roll hem silk -- I am a silk painter, and would love to make my own scarves. I don't need to quilt or do fancy embroidery, but I'd love something that is simple to use and produces elegant results (I have hand problems, so easy is important). I'm willing to spend up to $400 or so. Less would be better, but I don't want to skimp and be sorry later. What do you wise and helpful people suggest? Reliable and durable sewing machines cost more than that these days. So you might wish to consider a quality used machine instead. Of paramount importance are the dealers and the expertise of their technicians whether you are buying a new or used machine regardless of brand. This is a great topic of discussion these days as there are many horror stories about unqualified techs. You should definitely ask local people who sew and who have their machines serviced regularly (yes, that is also a must.... the annual checkup and oiling). I can personally vouch for the older, metal Berninas--- 930, 1130, 1230--- all a good bet, though even the 20-25 year old ones often fetch over $500. Others here can recommend reliable older models in other brands. Phae -- I fear me you but warm the starved snake, Who, cherished in your breasts, will sting your hearts. (Henry VI, Shakespeare) |
#3
|
|||
|
|||
What sewing machine should I buy?
What model Singer do you have? Some of the old all-metal gear machines are
so much sturdier than a lot of new machines. And if it does all that you need it to do, why get a new one? Take it and get it serviced. Those old machines can purr with very little upkeep... I learned on a 1929 model 15 (I think that's the number... either that or a 99) but my favorite machine is a 1923 201 that I can use in a treadle or as an electric. Nice big throat for quilting, does nice button holes... real work horse... So new isn't always "better..." grin Cappy "E in MN" wrote in message ... Hi everybody, I'm about to start doing more sewing, and am in need of a new machine (I'm still using my mothers first Singer she bought in the early 1960s!). I used to sew and design costumes and clothing in college (28 years ago - gack!), but have only done an occasional project since then, which is why I could get by with the Singer. My plans are to sew mostly simple garments from natural fabrics, cotton weave, cotton knits, silks, etc. I also want to roll hem silk -- I am a silk painter, and would love to make my own scarves. I don't need to quilt or do fancy embroidery, but I'd love something that is simple to use and produces elegant results (I have hand problems, so easy is important). I'm willing to spend up to $400 or so. Less would be better, but I don't want to skimp and be sorry later. What do you wise and helpful people suggest? Thanks you! Elizabeth |
#4
|
|||
|
|||
What sewing machine should I buy?
My Bernina 930 is a wonderful machine but I think they go for more than
$400. 830 is a similar machine with a few less bells and whistles and no stretch stitches. Neither are computer models. Singer 401, 403, 500 or 503 machines are great old work horses and well within your price range. Check out your local sewing machine shop and see what they have available used. Taria Phaedrine wrote: In article , E in MN wrote: Hi everybody, I'm about to start doing more sewing, and am in need of a new machine (I'm still using my mothers first Singer she bought in the early 1960s!). I used to sew and design costumes and clothing in college (28 years ago - gack!), but have only done an occasional project since then, which is why I could get by with the Singer. My plans are to sew mostly simple garments from natural fabrics, cotton weave, cotton knits, silks, etc. I also want to roll hem silk -- I am a silk painter, and would love to make my own scarves. I don't need to quilt or do fancy embroidery, but I'd love something that is simple to use and produces elegant results (I have hand problems, so easy is important). I'm willing to spend up to $400 or so. Less would be better, but I don't want to skimp and be sorry later. What do you wise and helpful people suggest? Reliable and durable sewing machines cost more than that these days. So you might wish to consider a quality used machine instead. Of paramount importance are the dealers and the expertise of their technicians whether you are buying a new or used machine regardless of brand. This is a great topic of discussion these days as there are many horror stories about unqualified techs. You should definitely ask local people who sew and who have their machines serviced regularly (yes, that is also a must.... the annual checkup and oiling). I can personally vouch for the older, metal Berninas--- 930, 1130, 1230--- all a good bet, though even the 20-25 year old ones often fetch over $500. Others here can recommend reliable older models in other brands. Phae |
#5
|
|||
|
|||
What sewing machine should I buy?
The same thing, Cappy, with my 1961 Singer Slant Needle, except I can not
use it as a pedal, wish I could. It uses cams to make beautiful decorative stitches, and there are so many different presser feet available today that weren't when I first got this beauty in the 80s, from a lady who was being moved to a nursing home and her daughter did not want it. I use it probably as much or more than any of my other machines. Emily. |
#6
|
|||
|
|||
What sewing machine should I buy?
Thanks for all the responses!
My current machine is a Singer Style-O-Matic 328, which needs approximately $100 worth of repairs before I can use it (regular maintenance which I've overlooked for years, plus the bobbin winder is broken). Once it's repaired, it has attachments to do everything that I want to do. The only reason I'm even considering a new machine is that I have hand and joint problems, and I know I would sew more if the machine were lighter and easier to operate. All those little screws on the Singer can cause me pain, and even the foot pedal is hard to operate sometimes. Went out yesterday and looked at Janomes and Vikings. Found a Janome Jem Platinum 760 for $499, and a new Viking Huskystar C10 on sale for $449. The Huskystar has 11 one-touch buttonholes! I hate to spend this kind of money, but maybe it's a good investment. I may check out Sears -- I hear they have a Janome and of course, Singers. Any other ideas or feedback would be greatly appreciated. Thank you! Angstriddenly, Elizabeth |
#7
|
|||
|
|||
What sewing machine should I buy?
E in MN wrote:
Any other ideas or feedback would be greatly appreciated. Thank you! ***DON'T*** get a Huskystar *holding nose* It won't hold up -- it's a classic oriental sailing ship. The Janome Jem is a very lightweight machine. Try to find a nice dealer with a nice selection of older machines to get far more bang for the buck than you might otherwise get. I found an 80s era machine that is the love of my life and it only cost me $129. If you lived in the SF Bay Area, I'd sell you my Singer 500A for about a third of what I paid for it (I bought it used a few years ago), because my Singer 401A is now the second love of my life, and it's so close to the 500 that I have no interest in the 500 any more. |
#8
|
|||
|
|||
What sewing machine should I buy?
I have to agree with you on some of the newer presser feet... But I think
I've only lusted after the rolled hem foot and a teflon foot for the 201. Everything else I can do, not necessarily the best or the fastest, with the regular presser foot. Cappy "CypSew" wrote in message ... The same thing, Cappy, with my 1961 Singer Slant Needle, except I can not use it as a pedal, wish I could. It uses cams to make beautiful decorative stitches, and there are so many different presser feet available today that weren't when I first got this beauty in the 80s, from a lady who was being moved to a nursing home and her daughter did not want it. I use it probably as much or more than any of my other machines. Emily. |
#9
|
|||
|
|||
What sewing machine should I buy?
500 was basically the 401 with zipped up styling.
There are some photos still on my webpage along with some links for older machine info: http://home1.gte.net/res6mc9p/tlw/taria/pages/index.htm Taria Melinda Meahan - take out TRASH to send wrote: E in MN wrote: Any other ideas or feedback would be greatly appreciated. Thank you! ***DON'T*** get a Huskystar *holding nose* It won't hold up -- it's a classic oriental sailing ship. The Janome Jem is a very lightweight machine. Try to find a nice dealer with a nice selection of older machines to get far more bang for the buck than you might otherwise get. I found an 80s era machine that is the love of my life and it only cost me $129. If you lived in the SF Bay Area, I'd sell you my Singer 500A for about a third of what I paid for it (I bought it used a few years ago), because my Singer 401A is now the second love of my life, and it's so close to the 500 that I have no interest in the 500 any more. |
#10
|
|||
|
|||
What sewing machine should I buy?
In article ,
"CypSew" wrote: The same thing, Cappy, with my 1961 Singer Slant Needle, except I can not use it as a pedal, wish I could. It uses cams to make beautiful decorative stitches, and there are so many different presser feet available today that weren't when I first got this beauty in the 80s, from a lady who was being moved to a nursing home and her daughter did not want it. I use it probably as much or more than any of my other machines. Emily. I remember those. We had them in our high school.... Slant-O-Matics, weren't they, or did that name come later? I guess I never understood what the slant was supposed to do. Do you know? They were nice machines. I did manage to get a home ec course in my freshman year. Our teacher had purple hair and a wart on her tongue that was a bit distracting. She was, however, an awesome teacher who made us learn the art of easing by doing set-in sleeves without basting..... only pins. If you had even the tiniest wrinkle you had to rip it out and start over again. One of my friends, a fellow Girl Scout, did not like this procedure and cut down the height of her sleeve cap to get it to ease in better. She got away with it too. When I set out to buy my first machine, I had no idea what I wanted so I rented machines until I found one that I really liked. I rented a lot of machines before I settled on one. It was a great way to find out what I liked and not. I wonder if any places still let you do that. Phae -- I fear me you but warm the starved snake, Who, cherished in your breasts, will sting your hearts. (Henry VI, Shakespeare) |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sewing machinery | sewing machinery | Yarn | 0 | March 21st 06 01:55 PM |
RCTQ FAQ Nov 2005 | frood | Quilting | 3 | November 6th 05 09:22 PM |
RCTQ FAQ August 2005 | frood | Quilting | 2 | August 2nd 05 02:57 PM |
FAQ RCTQ for newbies and oldtimers alike | Diana Curtis | Quilting | 15 | January 11th 04 06:20 PM |
FAQs for Newbies and Longtimers | Diana Curtis | Quilting | 21 | December 8th 03 12:52 PM |