Invisible thread (again - sorry)

I am still new at quilting and have not yet tried out any invisible threads.
There are so many different colors in the two I Spy quilts I'm making that I
think this might be the best thread to use for machine quilting them. I
bought a spool of Sulky polyester monofilament invisible thread. The only
size available was "Fine .004". Is this size correct for machine quilting
or is it too fine? Are there any tricks to using this thread for machine
quilting? (lower tension, etc.?)

I know this subject has been discussed a lot before but I was still a bit
unsure about this. Thanks so much for any pointers.

Bonnie
(working on piecing the second I Spy - not yet quilted the first)


--
http://community.webshots.com/user/bonnied9


delete "removespam" to reply

Hullo Bonnie
This is the 'thickness' I use. I haven't tried the Sulky, but that is
definitely a good make, so I'm sure it will be fine.
Funnily enough, I have never had any problem (other than threading the
needle and tying knots because you can hardly see the wretched stuff
g), so I don't know of any special measures to be taken. Someone here
will be sure to have all the info. on it, though.
..
In article , muse9
writes
I am still new at quilting and have not yet tried out any invisible threads.
There are so many different colors in the two I Spy quilts I'm making that I
think this might be the best thread to use for machine quilting them. I
bought a spool of Sulky polyester monofilament invisible thread. The only
size available was "Fine .004". Is this size correct for machine quilting
or is it too fine? Are there any tricks to using this thread for machine
quilting? (lower tension, etc.?)

I know this subject has been discussed a lot before but I was still a bit
unsure about this. Thanks so much for any pointers.

Bonnie
(working on piecing the second I Spy - not yet quilted the first)



--
Best Regards
pat on the hill

We've talked about the quirks and joys of invisible thread mighty thoroughly
quite recently so you already have a good base for trying it. However - by
all means do this. Make a sandwich of backing, the batting you plan to use
and some of the fabric that is used in your top. The sandwich needs to be
at least 12" square.
Practice on your sandwich and see if you have any problems or tinkering
to do. We're right here if you need us. All experts and very humble. Polly

I'm not keen on using any monofiliment thread on quilts intended for
children!! Someone somewhere told me it is not safe in case they get it in
their mouths!! Estelle
"muse9" wrote in message
...
I am still new at quilting and have not yet tried out any invisible
threads.
There are so many different colors in the two I Spy quilts I'm making that
I
think this might be the best thread to use for machine quilting them. I
bought a spool of Sulky polyester monofilament invisible thread. The only
size available was "Fine .004". Is this size correct for machine quilting
or is it too fine? Are there any tricks to using this thread for machine
quilting? (lower tension, etc.?)

I know this subject has been discussed a lot before but I was still a bit
unsure about this. Thanks so much for any pointers.

Bonnie
(working on piecing the second I Spy - not yet quilted the first)


--
http://community.webshots.com/user/bonnied9


delete "removespam" to reply

Sulky is the brand that was recommended when I took a machine quilting
class. I have used it quite a bit with good results. I do lower the
upper tension a bit. I use regular cotton sewing thread in the bobbin,
usually to match the backing.

You might also consider a variegated thread in colors that would blend
with your fabrics.

Julia in MN
--
This message has been scanned for viruses by Norton Anti-Virus

http://webpages.charter.net/jaccola/

Different machines = different tricks. With my Pfaff, the top tension has to
be lowered for free-motion quilting. And the invisible seems to look a
little better if I use silk in the bobbin. This was serendipity -found a
great bargain on variegated silk thread at a quilt show and bought lots. It
did not do well on top (although I didn't try it in a metallica needle), but
it's just wonderful in the bobbin.
Make yourself a practice sandwich and do some doodling until you find what
works.
Roberta in D

"muse9" wrote in message
...
I am still new at quilting and have not yet tried out any invisible
threads.
There are so many different colors in the two I Spy quilts I'm making that
I
think this might be the best thread to use for machine quilting them. I
bought a spool of Sulky polyester monofilament invisible thread. The only
size available was "Fine .004". Is this size correct for machine quilting
or is it too fine? Are there any tricks to using this thread for machine
quilting? (lower tension, etc.?)

I know this subject has been discussed a lot before but I was still a bit
unsure about this. Thanks so much for any pointers.

Bonnie
(working on piecing the second I Spy - not yet quilted the first)


--
http://community.webshots.com/user/bonnied9


delete "removespam" to reply

I just saw the thread lady on Fons and Porter yesterday. She's from
Sulky and she says they have a new 40 wt variegated thread that has
shorter distances between color changes so it blends better, it looked
very nice and I'm gonna try it.
"Julia in MN" wrote in
message ...
Sulky is the brand that was recommended when I took a machine
quilting
class. I have used it quite a bit with good results. I do lower the
upper tension a bit. I use regular cotton sewing thread in the
bobbin,
usually to match the backing.

You might also consider a variegated thread in colors that

This subject line is confusing!
I keep thinking "why post at all if the 'thread' is invisible?"
Sigh. I think I'm working too hard.
--
Teresa in Colorado

http://home.comcast.net/~treesaquilts
The Presser Foot in Longmont and Fort Collins, Colorado
www.thepresserfoot.com
-

"Roberta Zollner" wrote in message
...
Different machines = different tricks. With my Pfaff, the top tension has
to
be lowered for free-motion quilting. And the invisible seems to look a
little better if I use silk in the bobbin. This was serendipity -found a
great bargain on variegated silk thread at a quilt show and bought lots.
It
did not do well on top (although I didn't try it in a metallica needle),
but
it's just wonderful in the bobbin.
Make yourself a practice sandwich and do some doodling until you find what
works.
Roberta in D

"muse9" wrote in message
...
I am still new at quilting and have not yet tried out any invisible
threads.
There are so many different colors in the two I Spy quilts I'm making
that
I
think this might be the best thread to use for machine quilting them. I
bought a spool of Sulky polyester monofilament invisible thread. The
only
size available was "Fine .004". Is this size correct for machine
quilting
or is it too fine? Are there any tricks to using this thread for
machine
quilting? (lower tension, etc.?)

I know this subject has been discussed a lot before but I was still a
bit
unsure about this. Thanks so much for any pointers.

Bonnie
(working on piecing the second I Spy - not yet quilted the first)


--
http://community.webshots.com/user/bonnied9


delete "removespam" to reply

Yes, Teresa. Definitely g
(Mind you, that did cross my mind too!)
..
In article , Teresa in Colorado
writes
This subject line is confusing!
I keep thinking "why post at all if the 'thread' is invisible?"
Sigh. I think I'm working too hard.

--
Best Regards
pat on the hill

In article ,
"muse9" wrote:

I am still new at quilting and have not yet tried out any invisible threads.
There are so many different colors in the two I Spy quilts I'm making that I
think this might be the best thread to use for machine quilting them. I
bought a spool of Sulky polyester monofilament invisible thread. The only
size available was "Fine .004". Is this size correct for machine quilting
or is it too fine? Are there any tricks to using this thread for machine
quilting? (lower tension, etc.?)

I know this subject has been discussed a lot before but I was still a bit
unsure about this. Thanks so much for any pointers.

Bonnie
(working on piecing the second I Spy - not yet quilted the first)


Yup! That's the "right" size, and Sulky is supposed to be a good one,
though I haven't used it personally. I have used SewArt and YLI, though,
and they're also good. Since this monofilament stuff tends to get a bit
kinky after being on the spool for a while, be sure to keep your eye on
it as you quilt. Sometimes the kinks wind themselves around bits of your
machine and then tighten up and don't sew freely -- not nice. However,
this kind of thread is great for quilting where you don't want the
thread to be the main focus.
--
Sandy in Henderson, near Las Vegas
my ISP is earthlink.net -- put sfoster1(at) in front
http://home.earthlink.net/~sfoster1