If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Outlet and mini plug not working!!! Help!
Ok,
I installed the mini plug on the lamp as per instructions - I cut off the big plug, stripped the wires, inserted them in the sides, slid the pins and and used pliers to get them all the way in. Then I plugged it into an outlet (uninstalled) and touched the outlet pins to two live eyelets on an unfinished wall. I tested using an unconverted lamp by touching the big plug to those same eyelets, and it lights up fine. So I cut the small plug off, strip the wires and touched those wires to the same two live eyelets, to see if the lamp is working. It is. So I re-install the small plug, plug it back into the outlet, and touch it's pins to the eyelets. Nothing. What's going on? Does the outlet have to be fully installed to work? Cathy Weeks |
Ads |
#2
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|