If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
paragon b88b
Bailey ceramics has a full set of service and operation manuals on thier
web site for your Kiln free for download. you will need: if you dont have them now) kiln sitter cones for 04 (greenware to bisque) kiln furniture (stilts, risers and at least 3 shelves) and saftey equiptment, Fireproof apron, elbow length welding gloves Infrared Goggles a good dust/chemical resperator mask preferable one that has the cartridges, get a set of cartridges rated for lead paint. (you dont know where this kiln has been, you have to assume thats it's been firing leaded glaze, until proven otherwise. and a good sized shop vac a good location to fire it. (not indoors, unless you have a dedicated studio and a very good vent) the location will need a Nema 50 -50amp plug to plug the kiln into... you will need a electrician to set up the plug if you dont have one alreadf--- the Nema 50 is not a 3 wire plug like a dryer, its a 4 wire plug like a stove/range. (not a homeowener project to install, if itas done wrong, you can burn your house down... and while Im al for wood fired ceramics, thats giving a bit much for the art... if you have never fired yourself before- take a class at the local college... there are a hundred and one things to watch when your running a kiln and it just takes a little practice, here's the location for the manuals: http://www.paragonweb.com/Instruction_Manuals.cfm |
Ads |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Paragon B88B | james | Pottery | 2 | November 25th 06 12:38 AM |
FA - Paragon SC-2 kiln - as new | Adrian Brentnall | Glass | 0 | June 27th 06 08:09 AM |
OT Kiln ? for bead makers | KDK | Beads | 17 | May 12th 04 01:39 AM |
Any opinions on The Paragon Home Artist Kiln? | PissedOffCFer | Pottery | 1 | March 13th 04 11:31 PM |
Repair refractory material in a Paragon kiln? | kay lancaster | Pottery | 1 | July 28th 03 10:18 PM |