If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Knitted Scalloped Edging
BlankHello everyone. I am making a pair of baby booties (soon to be a grandma in about a week!). The instructions call for a plain stockinette stitch for the cuff. Is there an easy way to make a shell or a pretty edging to dress up the cuff? These are for a baby girl so I wanted to fancy them up a bit. Thanks for any help.
Mary Ann |
Ads |
#2
|
|||
|
|||
I have this great book called "All Stitched Up" by Jane Crowfoot, that is
all about finishing. She has an entire section on edgings that are really sharp -- lace, bobbles, picots, scallops. I see several in here that I think would look adorable on a little kids' sock. Most of them are done on the cast-on, which if you're doing your socks from the cuff down, is what you'd want. Some of the edgings depend on the number of stitches you are casting on. If you can find this book in your library or bookstore, I'd highly recommend it -- it has lots of pictures, diagrams, very good instructions, and things like the edgings that I've never come across in another book yet. If you're doing them from the toe-up, she has a very simple picot-edging that is done on the bind-off that I've used a lot: On the bind off row, bind off six stitches, and move the stitch remaining on the right needle to the left. Cast on three stitches. And then repeat the rest of the way. The number of stitches bound off and cast-on can be modified to alter the size of the picot. Karen in MN "Marsie" wrote in message nk.net... BlankHello everyone. I am making a pair of baby booties (soon to be a grandma in about a week!). The instructions call for a plain stockinette stitch for the cuff. Is there an easy way to make a shell or a pretty edging to dress up the cuff? These are for a baby girl so I wanted to fancy them up a bit. Thanks for any help. Mary Ann |
#3
|
|||
|
|||
I usually use the cable cast on for most things. For something like the
picot where you're casting on knitting already in progress, I think you have to use the cable cast-on. "Marsie" wrote in message news Thanks, Karen! What kind of Cast On do you use? I am still trying to visualize this before I try it so I don't mess it up. Thanks again. Mary Ann "Karen" wrote in message .. . I have this great book called "All Stitched Up" by Jane Crowfoot, that is all about finishing. She has an entire section on edgings that are really sharp -- lace, bobbles, picots, scallops. I see several in here that I think would look adorable on a little kids' sock. Most of them are done on the cast-on, which if you're doing your socks from the cuff down, is what you'd want. Some of the edgings depend on the number of stitches you are casting on. If you can find this book in your library or bookstore, I'd highly recommend it -- it has lots of pictures, diagrams, very good instructions, and things like the edgings that I've never come across in another book yet. If you're doing them from the toe-up, she has a very simple picot-edging that is done on the bind-off that I've used a lot: On the bind off row, bind off six stitches, and move the stitch remaining on the right needle to the left. Cast on three stitches. And then repeat the rest of the way. The number of stitches bound off and cast-on can be modified to alter the size of the picot. Karen in MN "Marsie" wrote in message nk.net... BlankHello everyone. I am making a pair of baby booties (soon to be a grandma in about a week!). The instructions call for a plain stockinette stitch for the cuff. Is there an easy way to make a shell or a pretty edging to dress up the cuff? These are for a baby girl so I wanted to fancy them up a bit. Thanks for any help. Mary Ann |
#4
|
|||
|
|||
Marsie, I just came across another very simple frill edge that would look
cute on a kid's sock -- cast on 4 times the number of stitches you'd need normally, minus 3 stitches. First row, K1, then *k2, slip the first stitch over the second, and repeat from the *. Second row, P1, *p2tog and repeat from * . Okay, so now that I have this book out, I found a lace edging that I want to use on the sleeves of a sweater I am making. This is a dangerous book to me -- every time I get it out, I find something else I just have to try, and end up with another WIP! There are SO many great ideas and techniques and "how-to's" in here. Karen in MN "Karen" wrote in message .. . I usually use the cable cast on for most things. For something like the picot where you're casting on knitting already in progress, I think you have to use the cable cast-on. "Marsie" wrote in message news Thanks, Karen! What kind of Cast On do you use? I am still trying to visualize this before I try it so I don't mess it up. Thanks again. Mary Ann "Karen" wrote in message .. . I have this great book called "All Stitched Up" by Jane Crowfoot, that is all about finishing. She has an entire section on edgings that are really sharp -- lace, bobbles, picots, scallops. I see several in here that I think would look adorable on a little kids' sock. Most of them are done on the cast-on, which if you're doing your socks from the cuff down, is what you'd want. Some of the edgings depend on the number of stitches you are casting on. If you can find this book in your library or bookstore, I'd highly recommend it -- it has lots of pictures, diagrams, very good instructions, and things like the edgings that I've never come across in another book yet. If you're doing them from the toe-up, she has a very simple picot-edging that is done on the bind-off that I've used a lot: On the bind off row, bind off six stitches, and move the stitch remaining on the right needle to the left. Cast on three stitches. And then repeat the rest of the way. The number of stitches bound off and cast-on can be modified to alter the size of the picot. Karen in MN "Marsie" wrote in message nk.net... BlankHello everyone. I am making a pair of baby booties (soon to be a grandma in about a week!). The instructions call for a plain stockinette stitch for the cuff. Is there an easy way to make a shell or a pretty edging to dress up the cuff? These are for a baby girl so I wanted to fancy them up a bit. Thanks for any help. Mary Ann |
#5
|
|||
|
|||
-- Thank you Karen I'll try this frill edge!! snipped: This is a dangerous book to me -- every time I get it out, I find something else I just have to try, and end up with another WIP! LOL! I know how THAT works! When I find a pattern on the net, I am normally not interested unless there is a photo. But I have gathered quite a few without.. and today I had to do a little "tidy up" in my patterns. You cannot throw away something you don't know what is, can you? And guess who has read and knitted freneticly to see how the patterns came out, ALL the day! And I have not decluttered A BIT!! AUD :-)) |
#6
|
|||
|
|||
Cable cast-on -- but I'm really not sure why! I have just gotten into the
habit of using that for some reason. But I don't see why another method couldn't be used as well. "Katherine Burgess" wrote in message ... Thanks for posting this, Karen. I think that I will try it. What type of cast-on do you use for this edging? Katherine "Karen" wrote in message ... Marsie, I just came across another very simple frill edge that would look cute on a kid's sock -- cast on 4 times the number of stitches you'd need normally, minus 3 stitches. First row, K1, then *k2, slip the first stitch over the second, and repeat from the *. Second row, P1, *p2tog and repeat from * . Okay, so now that I have this book out, I found a lace edging that I want to use on the sleeves of a sweater I am making. This is a dangerous book to me -- every time I get it out, I find something else I just have to try, and end up with another WIP! There are SO many great ideas and techniques and "how-to's" in here. Karen in MN "Karen" wrote in message .. . I usually use the cable cast on for most things. For something like the picot where you're casting on knitting already in progress, I think you have to use the cable cast-on. "Marsie" wrote in message news Thanks, Karen! What kind of Cast On do you use? I am still trying to visualize this before I try it so I don't mess it up. Thanks again. Mary Ann "Karen" wrote in message .. . I have this great book called "All Stitched Up" by Jane Crowfoot, that is all about finishing. She has an entire section on edgings that are really sharp -- lace, bobbles, picots, scallops. I see several in here that I think would look adorable on a little kids' sock. Most of them are done on the cast-on, which if you're doing your socks from the cuff down, is what you'd want. Some of the edgings depend on the number of stitches you are casting on. If you can find this book in your library or bookstore, I'd highly recommend it -- it has lots of pictures, diagrams, very good instructions, and things like the edgings that I've never come across in another book yet. If you're doing them from the toe-up, she has a very simple picot-edging that is done on the bind-off that I've used a lot: On the bind off row, bind off six stitches, and move the stitch remaining on the right needle to the left. Cast on three stitches. And then repeat the rest of the way. The number of stitches bound off and cast-on can be modified to alter the size of the picot. Karen in MN "Marsie" wrote in message nk.net... BlankHello everyone. I am making a pair of baby booties (soon to be a grandma in about a week!). The instructions call for a plain stockinette stitch for the cuff. Is there an easy way to make a shell or a pretty edging to dress up the cuff? These are for a baby girl so I wanted to fancy them up a bit. Thanks for any help. Mary Ann |
#7
|
|||
|
|||
Thanks again.
Katherine "Karen" wrote in message ... Cable cast-on -- but I'm really not sure why! I have just gotten into the habit of using that for some reason. But I don't see why another method couldn't be used as well. "Katherine Burgess" wrote in message ... Thanks for posting this, Karen. I think that I will try it. What type of cast-on do you use for this edging? Katherine "Karen" wrote in message ... Marsie, I just came across another very simple frill edge that would look cute on a kid's sock -- cast on 4 times the number of stitches you'd need normally, minus 3 stitches. First row, K1, then *k2, slip the first stitch over the second, and repeat from the *. Second row, P1, *p2tog and repeat from * . Okay, so now that I have this book out, I found a lace edging that I want to use on the sleeves of a sweater I am making. This is a dangerous book to me -- every time I get it out, I find something else I just have to try, and end up with another WIP! There are SO many great ideas and techniques and "how-to's" in here. Karen in MN "Karen" wrote in message .. . I usually use the cable cast on for most things. For something like the picot where you're casting on knitting already in progress, I think you have to use the cable cast-on. "Marsie" wrote in message news Thanks, Karen! What kind of Cast On do you use? I am still trying to visualize this before I try it so I don't mess it up. Thanks again. Mary Ann "Karen" wrote in message .. . I have this great book called "All Stitched Up" by Jane Crowfoot, that is all about finishing. She has an entire section on edgings that are really sharp -- lace, bobbles, picots, scallops. I see several in here that I think would look adorable on a little kids' sock. Most of them are done on the cast-on, which if you're doing your socks from the cuff down, is what you'd want. Some of the edgings depend on the number of stitches you are casting on. If you can find this book in your library or bookstore, I'd highly recommend it -- it has lots of pictures, diagrams, very good instructions, and things like the edgings that I've never come across in another book yet. If you're doing them from the toe-up, she has a very simple picot-edging that is done on the bind-off that I've used a lot: On the bind off row, bind off six stitches, and move the stitch remaining on the right needle to the left. Cast on three stitches. And then repeat the rest of the way. The number of stitches bound off and cast-on can be modified to alter the size of the picot. Karen in MN "Marsie" wrote in message nk.net... BlankHello everyone. I am making a pair of baby booties (soon to be a grandma in about a week!). The instructions call for a plain stockinette stitch for the cuff. Is there an easy way to make a shell or a pretty edging to dress up the cuff? These are for a baby girl so I wanted to fancy them up a bit. Thanks for any help. Mary Ann |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wanted 9 inch knitted or crocheted squares | Tami | Needlework | 0 | October 18th 04 12:49 AM |
Wanted 9 inch knitted or crocheted squares | Tami | Machine Knit | 0 | October 18th 04 12:48 AM |
Scalloped borders | frood | Quilting | 22 | June 14th 04 11:23 PM |
FS>>>Hand Knitted Items ........Check them out | Jacqueline | Marketplace | 0 | February 17th 04 06:45 PM |
OLD MCCALLS NEEDLEWORK & CRAFT MAG. PATTERN FOR CHRISTMAS STOCKING (knitted) | COLIN KIRKEGAARD DVM,MS | Yarn | 0 | August 30th 03 05:36 PM |