If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Morter and pestal?
Hi everyone :-)
I am typing from Switzerland and have been "potterying around" for about 3 years now. I am making good progress and have an old (cheap) used wheel here at home on the terrace that I can use when the weather is nice. I also go take classes once a week and will be renting that workshop one day a week when the weather gets too cold to sit out on the terrace anymore. Enough introductions :-) My question is if you have any tips or ideas on how to make a mortar and pestal. It is for my aunt. Will be making a salt-dish and a kitchen-tool-holder as well in hopefully somewhat the same "look". Everything I make is stoneware and fired at 1240 degrees Celcius. I figure if I make the mortar thick enough and let it dry slowly enough (and warn my aunt not to be too rigorous when using it), that it will be good to use. I have also thought of using clay with small stones in (chamotte, we call them here) and then sponging over the inside of the mortar to give it a slightly rough/sandy surface which should enhace performance. I kind of like the idea of either decorating it and the 2 other things in the same way, but also had a slight idea of making handles on the mortar that are more sculptured in some way. Maybe even trying to model a flower and the handles as leaves or something. ... or a groovy face with handles like ears or funny hair. Any tips and/or ideas and/or links to pictures of kewl mortars would be MOST welcome! Best regards from rainy Switzerland! Marianne |
Ads |
#2
|
|||
|
|||
The mortar an pestle I have is made of porcelain and is as you say very
heavy (thick - at least 1-2" or 2.5-5 centimeters). I have seen them made of stone but never out of any clay other than porcelain. I would think it would have to be a highly vitrified body... Just some thoughts. I know nothing. A jack of all trades, a master of none. By the by - I like the nic. It fits. "Bubbles" wrote in message ... Hi everyone :-) I am typing from Switzerland and have been "potterying around" for about 3 years now. I am making good progress and have an old (cheap) used wheel here at home on the terrace that I can use when the weather is nice. I also go take classes once a week and will be renting that workshop one day a week when the weather gets too cold to sit out on the terrace anymore. Enough introductions :-) My question is if you have any tips or ideas on how to make a mortar and pestal. It is for my aunt. Will be making a salt-dish and a kitchen-tool-holder as well in hopefully somewhat the same "look". Everything I make is stoneware and fired at 1240 degrees Celcius. I figure if I make the mortar thick enough and let it dry slowly enough (and warn my aunt not to be too rigorous when using it), that it will be good to use. I have also thought of using clay with small stones in (chamotte, we call them here) and then sponging over the inside of the mortar to give it a slightly rough/sandy surface which should enhace performance. I kind of like the idea of either decorating it and the 2 other things in the same way, but also had a slight idea of making handles on the mortar that are more sculptured in some way. Maybe even trying to model a flower and the handles as leaves or something. ... or a groovy face with handles like ears or funny hair. Any tips and/or ideas and/or links to pictures of kewl mortars would be MOST welcome! Best regards from rainy Switzerland! Marianne |
#3
|
|||
|
|||
P.S. It is embarrassing to go through Switzerland for the first time and
after every bend find yourself saying "THAT is the MOST BEAUTIFUL view I have EVER seen!" (on ride down from Zurich to Italy). "Bubbles" wrote in message ... ! Best regards from rainy Switzerland! Marianne |
#4
|
|||
|
|||
"dkat" wrote in message .net... The mortar an pestle I have is made of porcelain and is as you say very heavy (thick - at least 1-2" or 2.5-5 centimeters). I have seen them made of stone but never out of any clay other than porcelain. I would think it would have to be a highly vitrified body... Just some thoughts. I know nothing. A jack of all trades, a master of none. A friend of mine has made one - and it is even low-fired. She has been using it for about a year now. I can't work with porcelain yet - too much of a newbie. By the by - I like the nic. It fits. Thanks - I am a scuba diver too, so it fits even better! Hehe! Marianne |
#5
|
|||
|
|||
"dkat" wrote in message .net... P.S. It is embarrassing to go through Switzerland for the first time and after every bend find yourself saying "THAT is the MOST BEAUTIFUL view I have EVER seen!" (on ride down from Zurich to Italy). Hehe! I know that feeling! I moved here from Norway 3 years ago, and we just LOVE to just go for drives here and there to see what's to see :-) Marianne |
#6
|
|||
|
|||
That is really nice to know. I wonder if a body with lots of grout in it
would make for better grinding and how much iron you would be getting in your diet from using a red clay body? If you are going to be keeping your walls thick, then porcelain would not really be any harder to work with than stoneware. Not that I'm recommending it but you might like the feel of it just to play with. I don't think your really need to wait to be a master in one before beginning with another... Just a thought. "Bubbles" wrote in message ... "dkat" wrote in message .net... The mortar an pestle I have is made of porcelain and is as you say very heavy (thick - at least 1-2" or 2.5-5 centimeters). I have seen them made of stone but never out of any clay other than porcelain. I would think it would have to be a highly vitrified body... Just some thoughts. I know nothing. A jack of all trades, a master of none. A friend of mine has made one - and it is even low-fired. She has been using it for about a year now. I can't work with porcelain yet - too much of a newbie. By the by - I like the nic. It fits. Thanks - I am a scuba diver too, so it fits even better! Hehe! Marianne |
#7
|
|||
|
|||
"dkat" wrote in message .net... That is really nice to know. I wonder if a body with lots of grout in it would make for better grinding and how much iron you would be getting in your diet from using a red clay body? Not much, I bet, considering hopefully that the glaze will stay nicely on - though you might risk stuff from the glaze - I hadn't thought of that! As for grout (the tiny stones?) - I was thinking of making it with grouted clay and then washing over the inside of the bowl carefully with a sponge to bring the texture out an hopefully make mortaring more effective - I think it is a good idea, but so far nobody has confirmed this :-) If you are going to be keeping your walls thick, then porcelain would not really be any harder to work with than stoneware. Not that I'm recommending it but you might like the feel of it just to play with. I don't think your really need to wait to be a master in one before beginning with another... Just a thought. I recently tried making something with porcelain - just a couple of stamps - but I found it very icky and too rubbery to work with. I have found a really pliable but strong clay that I think I will use - or get one with larger grout in it but of the same type. I definitely can't see myself turning porcelain any time soon - for that it seemed too rubbery - but could be the type I have access to isn't of the best :-) Thanks for the tips! Marianne |
#8
|
|||
|
|||
I had just assumed it would be unglazed... Just went and checked. My
porcelain one is glazed on the outside but not on the inside where you grind... "Bubbles" wrote in message ... "dkat" wrote in message .net... That is really nice to know. I wonder if a body with lots of grout in it would make for better grinding and how much iron you would be getting in your diet from using a red clay body? Not much, I bet, considering hopefully that the glaze will stay nicely on - though you might risk stuff from the glaze - I hadn't thought of that! As for grout (the tiny stones?) - I was thinking of making it with grouted clay and then washing over the inside of the bowl carefully with a sponge to bring the texture out an hopefully make mortaring more effective - I think it is a good idea, but so far nobody has confirmed this :-) If you are going to be keeping your walls thick, then porcelain would not really be any harder to work with than stoneware. Not that I'm recommending it but you might like the feel of it just to play with. I don't think your really need to wait to be a master in one before beginning with another... Just a thought. I recently tried making something with porcelain - just a couple of stamps - but I found it very icky and too rubbery to work with. I have found a really pliable but strong clay that I think I will use - or get one with larger grout in it but of the same type. I definitely can't see myself turning porcelain any time soon - for that it seemed too rubbery - but could be the type I have access to isn't of the best :-) Thanks for the tips! Marianne |
#9
|
|||
|
|||
On Wed, 23 Jun 2004 14:52:49 +0200, "Bubbles"
wrote: "dkat" wrote in message v.net... P.S. It is embarrassing to go through Switzerland for the first time and after every bend find yourself saying "THAT is the MOST BEAUTIFUL view I have EVER seen!" (on ride down from Zurich to Italy). Hehe! I know that feeling! I moved here from Norway 3 years ago, and we just LOVE to just go for drives here and there to see what's to see :-) Marianne Wow, I'm impressed! I visited Norway a few years ago and thought that was the most beautiful place on Earth... now I guess I *have* to see Switzerland! Bob Masta dqatechATdaqartaDOTcom D A Q A R T A Data AcQuisition And Real-Time Analysis www.daqarta.com |
#10
|
|||
|
|||
"dkat" wrote in message news I had just assumed it would be unglazed... Just went and checked. My porcelain one is glazed on the outside but not on the inside where you grind... But porcelain is very even in itself, right? I figure with stoneware, it would give off particles into the food. Not sure, though - gotta give this some thought and research! Marianne |
|
Thread Tools | |
Display Modes | |
|
|