If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Wallpapering directly to walls or to posterboard first?
I had an idea about wallpapering - it's going to be difficult working
in such enclosed spaces, (though the gable is done already - I did that portion prior to assembly - I KNEW I'd never be able to get inside there) and I was wondering how I was going to hide some of my (ahem) messy electrical tape runs, and the eyelets. Someone suggested putting scotch tape over some of that, and I can do that, but... what if I made posterboard plans of the walls, made sure they fit perfectly, wallpapered that, and then when it was dry, affixing it in place, perhaps with wallpaper paste. There are some advantages: 1. Working in a non-enclosed space would be much easier. 2. It would be easier to correct mistakes (throw away the posterboard and start over if need be) 3. It would better cover the flaws in the walls like bubbles in the electric or whatnot. However, I'm sure there are disadvantages, but I'm not sure what they are, not having done this before. Is there anyone who has used this method? What are the pros and cons? Any advice? Cathy Weeks |
Ads |
#2
|
|||
|
|||
Here is what we did. Card stock from staples We bought an off white, kinda
beige. Printed the wallopaper to that. Measured and stuck it on with double sided sticky tape. Covers the electrical tapes and othe sins. Nearly all my wallpaper was made on an old Geocities account I have from my webtv days. All you need is a tile in the color you like. "Cathy Weeks" wrote in message om... I had an idea about wallpapering - it's going to be difficult working in such enclosed spaces, (though the gable is done already - I did that portion prior to assembly - I KNEW I'd never be able to get inside there) and I was wondering how I was going to hide some of my (ahem) messy electrical tape runs, and the eyelets. Someone suggested putting scotch tape over some of that, and I can do that, but... what if I made posterboard plans of the walls, made sure they fit perfectly, wallpapered that, and then when it was dry, affixing it in place, perhaps with wallpaper paste. There are some advantages: 1. Working in a non-enclosed space would be much easier. 2. It would be easier to correct mistakes (throw away the posterboard and start over if need be) 3. It would better cover the flaws in the walls like bubbles in the electric or whatnot. However, I'm sure there are disadvantages, but I'm not sure what they are, not having done this before. Is there anyone who has used this method? What are the pros and cons? Any advice? Cathy Weeks |
#3
|
|||
|
|||
Making patterns of the walls & papering over acidfree cardstock is a good
idea even if you just want to change the decor later. You could attach the wall pieces with double-lided tapethat would hold everything close enough to the tape run so the brads make contact. "Cathy Weeks" wrote I had an idea about wallpapering - it's going to be difficult working in such enclosed spaces ... what if I made posterboard plans of the walls, made sure they fit perfectly, wallpapered that, and then when it was dry, affixing it in place, perhaps with wallpaper paste. |
#4
|
|||
|
|||
http://www.geocities.com/woodenigloo...throomwall.htm
This is one I made and it is very long. I need to shorten it a bit. "Cathy Weeks" wrote in message om... I had an idea about wallpapering - it's going to be difficult working in such enclosed spaces, (though the gable is done already - I did that portion prior to assembly - I KNEW I'd never be able to get inside there) and I was wondering how I was going to hide some of my (ahem) messy electrical tape runs, and the eyelets. Someone suggested putting scotch tape over some of that, and I can do that, but... what if I made posterboard plans of the walls, made sure they fit perfectly, wallpapered that, and then when it was dry, affixing it in place, perhaps with wallpaper paste. There are some advantages: 1. Working in a non-enclosed space would be much easier. 2. It would be easier to correct mistakes (throw away the posterboard and start over if need be) 3. It would better cover the flaws in the walls like bubbles in the electric or whatnot. However, I'm sure there are disadvantages, but I'm not sure what they are, not having done this before. Is there anyone who has used this method? What are the pros and cons? Any advice? Cathy Weeks |
#5
|
|||
|
|||
http://www.geocities.com/woodenigloo.geo/bedroom.htm
Bedroom "Cathy Weeks" wrote in message om... I had an idea about wallpapering - it's going to be difficult working in such enclosed spaces, (though the gable is done already - I did that portion prior to assembly - I KNEW I'd never be able to get inside there) and I was wondering how I was going to hide some of my (ahem) messy electrical tape runs, and the eyelets. Someone suggested putting scotch tape over some of that, and I can do that, but... what if I made posterboard plans of the walls, made sure they fit perfectly, wallpapered that, and then when it was dry, affixing it in place, perhaps with wallpaper paste. There are some advantages: 1. Working in a non-enclosed space would be much easier. 2. It would be easier to correct mistakes (throw away the posterboard and start over if need be) 3. It would better cover the flaws in the walls like bubbles in the electric or whatnot. However, I'm sure there are disadvantages, but I'm not sure what they are, not having done this before. Is there anyone who has used this method? What are the pros and cons? Any advice? Cathy Weeks |
#6
|
|||
|
|||
http://www.geocities.com/woodenigloo.geo/parquet.htm
"Cathy Weeks" wrote in message om... I had an idea about wallpapering - it's going to be difficult working in such enclosed spaces, (though the gable is done already - I did that portion prior to assembly - I KNEW I'd never be able to get inside there) and I was wondering how I was going to hide some of my (ahem) messy electrical tape runs, and the eyelets. Someone suggested putting scotch tape over some of that, and I can do that, but... what if I made posterboard plans of the walls, made sure they fit perfectly, wallpapered that, and then when it was dry, affixing it in place, perhaps with wallpaper paste. There are some advantages: 1. Working in a non-enclosed space would be much easier. 2. It would be easier to correct mistakes (throw away the posterboard and start over if need be) 3. It would better cover the flaws in the walls like bubbles in the electric or whatnot. However, I'm sure there are disadvantages, but I'm not sure what they are, not having done this before. Is there anyone who has used this method? What are the pros and cons? Any advice? Cathy Weeks |
#7
|
|||
|
|||
Smaller squares
http://www.geocities.com/woodenigloo.geo/parquet2.htm "Cathy Weeks" wrote in message om... I had an idea about wallpapering - it's going to be difficult working in such enclosed spaces, (though the gable is done already - I did that portion prior to assembly - I KNEW I'd never be able to get inside there) and I was wondering how I was going to hide some of my (ahem) messy electrical tape runs, and the eyelets. Someone suggested putting scotch tape over some of that, and I can do that, but... what if I made posterboard plans of the walls, made sure they fit perfectly, wallpapered that, and then when it was dry, affixing it in place, perhaps with wallpaper paste. There are some advantages: 1. Working in a non-enclosed space would be much easier. 2. It would be easier to correct mistakes (throw away the posterboard and start over if need be) 3. It would better cover the flaws in the walls like bubbles in the electric or whatnot. However, I'm sure there are disadvantages, but I'm not sure what they are, not having done this before. Is there anyone who has used this method? What are the pros and cons? Any advice? Cathy Weeks |
#8
|
|||
|
|||
"betsyb" wrote in message ...
Smaller squares http://www.geocities.com/woodenigloo.geo/parquet2.htm Wow...thanks for the URLs! Cathy |
#9
|
|||
|
|||
"havana bill & holly" wrote in message ...
Making patterns of the walls & papering over acidfree cardstock is a good idea even if you just want to change the decor later. You could attach the wall pieces with double-lided tapethat would hold everything close enough to the tape run so the brads make contact. I take it the issue is that if I'm installing outlets, the nails on the back of the outlet have to poke through the wallpaper, and cardstock, and tape wire, and still be long enough to be imbedded into the wall to hold tightly? Is this a problem? Cathy Weeks |
#10
|
|||
|
|||
Since I didn't install them, I just had to go and look. They went right thru
the card stock into the tape behind it. The area the tap runs is marked in pencil on the trimwork My hubby didn't swear, so I assume they installed easily. If things aren't working like they should the room fills with green fog!! "Cathy Weeks" wrote in message om... "havana bill & holly" wrote in message ... Making patterns of the walls & papering over acidfree cardstock is a good idea even if you just want to change the decor later. You could attach the wall pieces with double-lided tapethat would hold everything close enough to the tape run so the brads make contact. I take it the issue is that if I'm installing outlets, the nails on the back of the outlet have to poke through the wallpaper, and cardstock, and tape wire, and still be long enough to be imbedded into the wall to hold tightly? Is this a problem? Cathy Weeks |
Thread Tools | |
Display Modes | |
|
|