If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
A sort of OT question on copper
This isn't bead related, but I suspect some of the folks who work with
copper will be able to help. We're being lazy slugs this morning and watching home design shows. I had a cool idea about making a copper backsplash for the range. Instead of regular shiny copper, which is awfully high maintenance, I'm thinking it would be cool to color the copper with heat. I've seen lots of wall sculpture and stuff like that with heat-colored copper. Does anyone know of any resources for instructions? I'm not even sure how to Google for it. I tried "heat treated copper" and got all sorts of utterly useless info. Thoughts and URL's gratefully accepted. -- KarenK www.desertdreameraz.com Ebay: http://stores.ebay.com/Desert-Dreamer-Designs Justbeads: http://www.justbeads.com/search/ql.cfm?s=DesertDreamer |
Ads |
#2
|
|||
|
|||
I would think that copper would still be high maintenance even when you heat
treated it. It would be green before you know it. Roxan "Karen_AZ" wrote in message news:XegGc.10211$nc.1353@fed1read03... This isn't bead related, but I suspect some of the folks who work with copper will be able to help. We're being lazy slugs this morning and watching home design shows. I had a cool idea about making a copper backsplash for the range. Instead of regular shiny copper, which is awfully high maintenance, I'm thinking it would be cool to color the copper with heat. I've seen lots of wall sculpture and stuff like that with heat-colored copper. Does anyone know of any resources for instructions? I'm not even sure how to Google for it. I tried "heat treated copper" and got all sorts of utterly useless info. Thoughts and URL's gratefully accepted. -- KarenK www.desertdreameraz.com Ebay: http://stores.ebay.com/Desert-Dreamer-Designs Justbeads: http://www.justbeads.com/search/ql.cfm?s=DesertDreamer |
#3
|
|||
|
|||
I don't have any answers for you, but if you make one please, please post
photos. -- Starlia Klopman www.klopmanstudios.com "Karen_AZ" wrote in message news:XegGc.10211$nc.1353@fed1read03... This isn't bead related, but I suspect some of the folks who work with copper will be able to help. We're being lazy slugs this morning and watching home design shows. I had a cool idea about making a copper backsplash for the range. Instead of regular shiny copper, which is awfully high maintenance, I'm thinking it would be cool to color the copper with heat. I've seen lots of wall sculpture and stuff like that with heat-colored copper. Does anyone know of any resources for instructions? I'm not even sure how to Google for it. I tried "heat treated copper" and got all sorts of utterly useless info. Thoughts and URL's gratefully accepted. -- KarenK www.desertdreameraz.com Ebay: http://stores.ebay.com/Desert-Dreamer-Designs Justbeads: http://www.justbeads.com/search/ql.cfm?s=DesertDreamer |
#4
|
|||
|
|||
butane torch. pair of tongs. pan of water big enough to put the copper in.
hold copper with tongs. use torch underneath until copper turns the color you want. it can turn blue, peach, pink, etc. when a section reaches that color...stop. too long and it goes back to copper and will never change back to another color. douse it in the water to cool it. i have made jewelry using this technique, have never sealed it (although some people do) and it has never patina'd. "Karen_AZ" wrote in message news:XegGc.10211$nc.1353@fed1read03... This isn't bead related, but I suspect some of the folks who work with copper will be able to help. We're being lazy slugs this morning and watching home design shows. I had a cool idea about making a copper backsplash for the range. Instead of regular shiny copper, which is awfully high maintenance, I'm thinking it would be cool to color the copper with heat. I've seen lots of wall sculpture and stuff like that with heat-colored copper. Does anyone know of any resources for instructions? I'm not even sure how to Google for it. I tried "heat treated copper" and got all sorts of utterly useless info. Thoughts and URL's gratefully accepted. -- KarenK www.desertdreameraz.com Ebay: http://stores.ebay.com/Desert-Dreamer-Designs Justbeads: http://www.justbeads.com/search/ql.cfm?s=DesertDreamer |
#5
|
|||
|
|||
That's the method. If you want to Google for more info try "heat patina"
of "flame patina". -- There are no mistakes, only unexplored techniques "lgreene" wrote in message ... butane torch. pair of tongs. pan of water big enough to put the copper in. hold copper with tongs. use torch underneath until copper turns the color you want. it can turn blue, peach, pink, etc. when a section reaches that color...stop. too long and it goes back to copper and will never change back to another color. douse it in the water to cool it. i have made jewelry using this technique, have never sealed it (although some people do) and it has never patina'd. "Karen_AZ" wrote in message news:XegGc.10211$nc.1353@fed1read03... This isn't bead related, but I suspect some of the folks who work with copper will be able to help. We're being lazy slugs this morning and watching home design shows. I had a cool idea about making a copper backsplash for the range. Instead of regular shiny copper, which is awfully high maintenance, I'm thinking it would be cool to color the copper with heat. I've seen lots of wall sculpture and stuff like that with heat-colored copper. Does anyone know of any resources for instructions? I'm not even sure how to Google for it. I tried "heat treated copper" and got all sorts of utterly useless info. Thoughts and URL's gratefully accepted. -- KarenK www.desertdreameraz.com Ebay: http://stores.ebay.com/Desert-Dreamer-Designs Justbeads: http://www.justbeads.com/search/ql.cfm?s=DesertDreamer |
#6
|
|||
|
|||
Thank You!!!!!!!!!
KarenK |
#7
|
|||
|
|||
Please remember that copper gives off toxic fumes when heated and wear proper
respiration equipment or take it to a welding shop and have them do it. Patti |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Not really an AD, but a marketing question, need advice | Kandice Seeber | Beads | 26 | April 4th 04 10:39 AM |
how do you feel about copper? | Pam | Beads | 22 | February 27th 04 08:59 PM |
Question (sort of AD) | Kandice Seeber | Beads | 8 | February 21st 04 01:02 AM |
Copper | starlia | Beads | 7 | September 8th 03 10:25 PM |
Pearls and Copper | Valerie | Beads | 4 | August 5th 03 02:05 AM |