If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
oil fed cutters
Oh boy, I'm starting to feel way out of this whole field...and I
thought I knew it so well. I did, but that was 18 years ago! So much has happened and so much as developed, I'm feeling very 'green'. My supplier, bless her heart, sent me a terrific selection of glass to choose from..along with a price list for other equipment. I see Toyo and Mitsuboshi oil cutters...I'm familiar with them.. but what's with the difference in cutter size? (head size)... why would you want to use a wide head as opposed to a narrow head? or have I missed something here? the photos aren't all that great on the website and there's no explanation of course..so some of you who are much more up to date with things, would you please explain this to me? and isn't there a 'tungsten' wheel for these cutters? i don't see anything like that in the list ... what is it i should be looking for...what cutter should i be looking for? thanks again. sorry to be asking all these dumb questions...i feel really stupid...but it won't last long! it will all come back to me...like riding a bike!! arlene |
Ads |
#2
|
|||
|
|||
oil fed cutters
wrote in message oups.com... Oh boy, I'm starting to feel way out of this whole field...and I thought I knew it so well. I did, but that was 18 years ago! So much has happened and so much as developed, I'm feeling very 'green'. My supplier, bless her heart, sent me a terrific selection of glass to choose from..along with a price list for other equipment. I see Toyo and Mitsuboshi oil cutters...I'm familiar with them.. but what's with the difference in cutter size? (head size)... why would you want to use a wide head as opposed to a narrow head? or have I missed something here? the photos aren't all that great on the website and there's no explanation of course..so some of you who are much more up to date with things, would you please explain this to me? and isn't there a 'tungsten' wheel for these cutters? i don't see anything like that in the list ... what is it i should be looking for...what cutter should i be looking for? thanks again. sorry to be asking all these dumb questions...i feel really stupid...but it won't last long! it will all come back to me...like riding a bike!! arlene "The only dumb question is the one you don't ask" I didn't say it, but someone else did... The companies you are mentioning both carbide wheels, the decisions on wheels that you had to make 18 years ago are not an issue today. But the cutters are $1.50 anymore either. The wider head is for cutting with a straight edge, it "holds" to the cutting square easier. |
#3
|
|||
|
|||
oil fed cutters
carbide is the material for the wheel head, it lasts a very long time. I use
the smaller head as it allows easier detail and curve cutting. m wrote in message oups.com... Oh boy, I'm starting to feel way out of this whole field...and I thought I knew it so well. I did, but that was 18 years ago! So much has happened and so much as developed, I'm feeling very 'green'. My supplier, bless her heart, sent me a terrific selection of glass to choose from..along with a price list for other equipment. I see Toyo and Mitsuboshi oil cutters...I'm familiar with them.. but what's with the difference in cutter size? (head size)... why would you want to use a wide head as opposed to a narrow head? or have I missed something here? the photos aren't all that great on the website and there's no explanation of course..so some of you who are much more up to date with things, would you please explain this to me? and isn't there a 'tungsten' wheel for these cutters? i don't see anything like that in the list ... what is it i should be looking for...what cutter should i be looking for? thanks again. sorry to be asking all these dumb questions...i feel really stupid...but it won't last long! it will all come back to me...like riding a bike!! arlene |
#4
|
|||
|
|||
oil fed cutters
I think if you check the actual wheel material is Tungsten carbide so
you are both half right. michele wrote: carbide is the material for the wheel head, it lasts a very long time. I use the smaller head as it allows easier detail and curve cutting. m wrote in message roups.com... Oh boy, I'm starting to feel way out of this whole field...and I thought I knew it so well. I did, but that was 18 years ago! So much has happened and so much as developed, I'm feeling very 'green'. My supplier, bless her heart, sent me a terrific selection of glass to choose from..along with a price list for other equipment. I see Toyo and Mitsuboshi oil cutters...I'm familiar with them.. but what's with the difference in cutter size? (head size)... why would you want to use a wide head as opposed to a narrow head? or have I missed something here? the photos aren't all that great on the website and there's no explanation of course..so some of you who are much more up to date with things, would you please explain this to me? and isn't there a 'tungsten' wheel for these cutters? i don't see anything like that in the list ... what is it i should be looking for...what cutter should i be looking for? thanks again. sorry to be asking all these dumb questions...i feel really stupid...but it won't last long! it will all come back to me...like riding a bike!! arlene |
#5
|
|||
|
|||
oil fed cutters
Javahut wrote:
wrote in message oups.com... Oh boy, I'm starting to feel way out of this whole field...and I thought I knew it so well. I did, but that was 18 years ago! So much has happened and so much as developed, I'm feeling very 'green'. My supplier, bless her heart, sent me a terrific selection of glass to choose from..along with a price list for other equipment. I see Toyo and Mitsuboshi oil cutters...I'm familiar with them.. but what's with the difference in cutter size? (head size)... why would you want to use a wide head as opposed to a narrow head? or have I missed something here? the photos aren't all that great on the website and there's no explanation of course..so some of you who are much more up to date with things, would you please explain this to me? and isn't there a 'tungsten' wheel for these cutters? i don't see anything like that in the list ... what is it i should be looking for...what cutter should i be looking for? thanks again. sorry to be asking all these dumb questions...i feel really stupid...but it won't last long! it will all come back to me...like riding a bike!! arlene "The only dumb question is the one you don't ask" I didn't say it, but someone else did... The companies you are mentioning both carbide wheels, the decisions on wheels that you had to make 18 years ago are not an issue today. But the cutters are $1.50 anymore either. The wider head is for cutting with a straight edge, it "holds" to the cutting square easier. Sorry my poor understanding of English. Do you mean "wide" in a sense that it has wide chin plate which gives support against straight edge. Or do you mean wide vs. narrow cutting angle. A sharp narrow angle cutter is recommended for thin glass, a broader angle for thick glass. I do not remember the usual angles. -lauri |
#6
|
|||
|
|||
oil fed cutters
Hi and thanks...everyone.
for the record, i NEVER DID use a cheap cutter. I always had an expensive brass barrel oil cutter...probably toyo...i'm not sure but that sounds familiar. i don't even remember width differences...but that may be because no one told me that there was such a thing. so, it seems to me that i need to have BOTH heads...i'll check to see if either have carbide wheels. wheels are replaceable, right? thanks all, arlene |
#7
|
|||
|
|||
oil fed cutters
hi lauri,
hey, at the rate i'm losing my English, you won't be alone!! i am not 100% sure of what i mean..i'm going to have to order one of each and try to figure it out!! honestly, this was NEVER an issue 20 years ago.. thanks, arlene |
#8
|
|||
|
|||
oil fed cutters
wide head tracks on a guide (straight edge)
narrow head is for FREE HAND CUTTING! push or pull who cares h |
#9
|
|||
|
|||
oil fed cutters
You don't "need" both the large and the small. The large heads (as a
previous poster mentioned) are for more stability when cutting straight lines with a cutting square. The only time I'm using the large head is when I'm cutting large sheets in half or cutting strips. That being said, I used a small cutting head for over 20 years before I bought the large head. All Toyo cutters have a carbide wheel. Same with Fletcher except for the ball cutters and they have both. Andy http://www.neoglassic.com wrote: Hi and thanks...everyone. for the record, i NEVER DID use a cheap cutter. I always had an expensive brass barrel oil cutter...probably toyo...i'm not sure but that sounds familiar. i don't even remember width differences...but that may be because no one told me that there was such a thing. so, it seems to me that i need to have BOTH heads...i'll check to see if either have carbide wheels. wheels are replaceable, right? thanks all, arlene |
#10
|
|||
|
|||
oil fed cutters
|
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cutters Mate | michasiow | Glass | 7 | February 27th 06 11:20 AM |
Question about Cookie Cutters | Marissa Undercofler | Polymer Clay | 8 | November 5th 04 01:27 AM |
Heart Cookie Cutters - Not OT | Eli | Quilting | 2 | February 12th 04 05:00 PM |
OT sorta - sewing cookie cutters, so cute, nayy | nzl* | Quilting | 3 | December 16th 03 09:05 PM |
Really square cutters? | Irwin | Polymer Clay | 3 | October 18th 03 04:59 PM |