If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Making clay caves for aquarium fish...
Hello,
I'm an aquarist, and many fish like to live or breed in shelters, referred to as 'caves'. Normally shattered plant-pots or terracotta tubes are used, like this... http://www.planetcatfish.com/images/...sc/sw/hz/7.jpg ....but it would be very useful to be able to make 'custom' caves for the fish. When I've looked in to this in the past, the need to use a kiln has put me off, but now I see there's air-drying clays, as well as low-fire clays and polymer clays you can fire in your household oven. My questions a are air-drying/low-firing clays or polymer clays non-toxic after firing, and would they survive (ie not fall to pieces) if kept constantly in water for several years? |
Ads |
#2
|
|||
|
|||
Making clay caves for aquarium fish...
i don't think they'll work, but you can try some home testing to see if
obvious stuff happens - like does it melt in water? etc. pick a clay you're curious of, make something, and BEFORE adding it to a tank of water, check the water for basics like PH and calicum with regular swimming pool water test kits. assuming your piece doesn't melt in water, confirm the piece doesn't shift the water properties like PH & calcium, etc. see ya steve |
#3
|
|||
|
|||
Making clay caves for aquarium fish...
wrote in message oups.com... Hello, I'm an aquarist, and many fish like to live or breed in shelters, referred to as 'caves'. Normally shattered plant-pots or terracotta tubes are used, like this... http://www.planetcatfish.com/images/...sc/sw/hz/7.jpg ...but it would be very useful to be able to make 'custom' caves for the fish. When I've looked in to this in the past, the need to use a kiln has put me off, but now I see there's air-drying clays, as well as low-fire clays and polymer clays you can fire in your household oven. My questions a are air-drying/low-firing clays or polymer clays non-toxic after firing, and would they survive (ie not fall to pieces) if kept constantly in water for several years? Luckily, I have a kiln, so I will be making my own decorations and stuff for our coming (SOOOON!!) aquariums. There are clays that have to be oven-baked, which might not give off as much "stuff" as air-dry clays. You also have that plastic stuff that just needs to be heated a little in order to dry hard, and that seems then very durable. But I second Steve that you need to put a piece in a water sample that you test before and after - and long after! You don't want to poison your fish in the attempts :-) Marianne |
#4
|
|||
|
|||
Making clay caves for aquarium fish...
I use polymer clay for snow globes and, since it is a polymer plastic, it is
ideal for permanent placement in a water/oil situation. The toxicity, however, is not a consideration in a sealed application so I can't say if that would be an issue for you or not. Best of luck with the fishies! Lori "Bubbles" wrote in message ... wrote in message oups.com... Hello, I'm an aquarist, and many fish like to live or breed in shelters, referred to as 'caves'. Normally shattered plant-pots or terracotta tubes are used, like this... http://www.planetcatfish.com/images/...sc/sw/hz/7.jpg ...but it would be very useful to be able to make 'custom' caves for the fish. When I've looked in to this in the past, the need to use a kiln has put me off, but now I see there's air-drying clays, as well as low-fire clays and polymer clays you can fire in your household oven. My questions a are air-drying/low-firing clays or polymer clays non-toxic after firing, and would they survive (ie not fall to pieces) if kept constantly in water for several years? Luckily, I have a kiln, so I will be making my own decorations and stuff for our coming (SOOOON!!) aquariums. There are clays that have to be oven-baked, which might not give off as much "stuff" as air-dry clays. You also have that plastic stuff that just needs to be heated a little in order to dry hard, and that seems then very durable. But I second Steve that you need to put a piece in a water sample that you test before and after - and long after! You don't want to poison your fish in the attempts :-) Marianne |
#5
|
|||
|
|||
Making clay caves for aquarium fish...
wrote in message
roups.com... Hello, I'm an aquarist, and many fish like to live or breed in shelters, referred to as 'caves'. Normally shattered plant-pots or terracotta tubes are used, like this... http://www.planetcatfish.com/images/...sc/sw/hz/7.jpg ...but it would be very useful to be able to make 'custom' caves for the fish. When I've looked in to this in the past, the need to use a kiln has put me off, but now I see there's air-drying clays, as well as low-fire clays and polymer clays you can fire in your household oven. My questions a are air-drying/low-firing clays or polymer clays non-toxic after firing, and would they survive (ie not fall to pieces) if kept constantly in water for several years? From experience, I would opt for fired clay, the higher temperature the better, rather than anything else. Air dried clays are not, in my experience, water resistant, and I would avoid anything that cold cures because of possible chemical release. I used to make pieces for a local aquarium shop, and we found that the safest option was cone 8/9 stoneware, as it is largely resistant to any contamination. Porous materials aren't! Steve Bath UK -- Steve Mills Bath UK |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Making your very own Paua Shell beads from poly clay :) | HarryB41 | Beads | 18 | November 2nd 04 06:32 AM |
Question about making polymer clay beads | Pandi | Beads | 9 | October 19th 04 12:53 PM |
Poly Clay/ wicked Candace | Stephanie | Beads | 49 | September 12th 04 03:07 AM |
making molds...progress report! | Sjpolyclay | Beads | 10 | July 17th 04 07:59 AM |
Makins and La Doll & other stone ground mineral clays?? | DianeGlassAttic | Polymer Clay | 0 | October 13th 03 06:21 PM |