If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Converts to spinning
Congrats to both of you, Myka and Noreen, on learning to spin! (thought I'd be
efficient and combine the threads. g) I can see you're both safely hooked - don't you love the feeling of accomplishment it gives? May you have many enjoyable years of spinning your own. And Noreen, when are we gonna see pictures of your yarn??? Myka, your first skein looks lovely - great work! Re more yarn on a spindle - you might also want to look up directions on the web to make your own out of a dowel and a couple of CD's, and make a Navajo-type spindle. Not pretty - I mean the CD kind, not actual Navajo spindles - but they work. They have a *long* shaft, and hold masses of yarn. May take a little modification of your spinning method, so you'd probably want to do this after you feel really comfortable with your current spindle. Because of the size, Navajo spindles are usually used while sitting down, and the tip rests on the floor, or in a heavy bowl on the floor to help keep it in place. Then you roll the shaft against your thigh rather than twirling the spindle in the air as you do with smaller spindles. (not a very good explanation, but I've only read about using a Navajo spindle. g I'm sure Helen or someone else here can give a better idea of it.) Anyway, even with thick yarn, they can hold enough for a big skein. Or just be patient. The more you spin, the more even and finely you'll be spinning, you'll figure out your best winding method, and you'll end up with 50 yards or more on your spindle. Matter of fact, one of the problems once you get experienced is that you'll be *wanting* to spin uneven, novelty-type yarn, and it's hard to do because your fingers have learned to spin smooth and fine! Then you'll be moaning over the fact that you're having a hard time spinning bulky yarns like the ones for which they're charging $9.95 a skein. veg Of course, by then, you'll have switched to your charkha and be spinning bigger skeins anyway--and charkhas spin fine. Or you'll decide you need a European-style wheel, just because. And before you know it, the collecting begins. Look at Slinky! ::giggles and runs for the hills:: Meanwhile, Els' suggestion about the cross-winding is the basic solution. Keep going *way* up and down the spindle from the very start; nearly to the tip of the shaft, and you'll get a lot more yarn on there. And maybe wind on the yarn a bit more tightly at the tip to help hold it in place; it'll fluff back up again when you wash it. I can see from your web-page pix that you're using a top-whorl spindle - that's probably the main reason the yarn is falling off. A bottom-whorl spindle helps the yarn-sliding problem. You don't have to worry about the cone of yarn falling off because the base of the cone rests on the whorl; it's not going anywhere. Unless you drop the dang thing, it gets away from you, and merrily rolls across the floor, unwinding as it goes. Why yes, it's happened to me frequently; how did you guess? LOL That's one reason I've never bothered trying a top-whorl; well, that and Dad never got interested in making one. bg Even without trying one, I could just *see* the yarn sliding right off the shaft, as you've said. Of course, when I was learning to spin, you could hardly find any references to that type, and they sure weren't selling many of 'em anywhere! Except for vague mentions of a 'Turkish style' of spindle, with very small illustrations in the few spinning books one could find. g I already had 2 spindles; back in those days I wasn't going to track down and spend money on another just to try a different style. (especially since Dad made ours and I was getting them free.) And by the time I got my first wheel, I had 4 spindles in different sizes, and really, I didn't want any more! Besides, they were starting to charge more for them by then. (I don't care if it's made from rosewood, $24.95 or so for a spindle is just ridiculous, IMNSHO. gimme a dowel and a wooden cabinet knob, some sandpaper and glue, and I can make my own - geesh. I just want the dang thing to spin, I don't care how it looks. heck, in a pinch you can use a crochet hook and a small potato...) I also kind of think that some of us have a definite preference for top or bottom whorl spindles; maybe in the genes. Plenty of folks probably don't care which they use, and happily switch back and forth; but I'm betting equally as many spinners find they work better with one or the other. Or you could try turning your spindle upside down, using it as a bottom whorl, and see if that helps. The shaft looks long enough to do that. No, you couldn't use that handy loop then to run the free yarn through, but it does have those little grooves at the bottom point of the shaft - a firm half-hitch with the yarn around the shaft at that point should work. Some of my spindles don't even have a notch cut into the tip of the shaft, and are perfectly smooth, but my half-hitches stay put just fine. Most of the time I rather wish my other spindles didn't have the notch, I don't really need it. And don't worry if you start doing something differently than your teacher suggests - everyone spins a little differently, and we all learn our own tricks. Once you get the basics down, you're free to use whatever methods work best for you! Monica CMMPDX2 at aol remove 'eat.spam' to email me --------- "No, that isn't me you saw - I'm not here, I'm incognito!" (Me, Myself & I) Support our Troops!! http://www.wtv-zone.com/kjsb/bataan.html |
Ads |
#2
|
|||
|
|||
Monica...
My web-cam is being used elsewhere, and right now my RAM is giving me fits so am not using the scanner either. I WILL post pix soon. Thanks for the encouragement! Yes, I AM hooked... very soothing and very invigorating at the same time! Hugs, Noreen --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.529 / Virus Database: 324 - Release Date: 10/17/03 |
#3
|
|||
|
|||
(yes, I'm being lazy and staying online tonight. g)
Noreen wrote: My web-cam is being used elsewhere, and right now my RAM is giving me fits so am not using the scanner either. I WILL post pix soon. Ack - sending soothing vibes to your computer so it'll cooperate! And will be looking forward to pix, when everything settles down. Thanks for the encouragement! You're welcome, of course. Always enjoy enabl-- er, *encouraging* new fellow spinners. ::snerk:: Yes, I AM hooked... very soothing and very invigorating at the same time! 'Tis, isn't it? Especially when things like your computer are acting up. Ok, so you can screw things up while spinning, but by gum, the problems aren't *nearly* as complicated - usually - as they are with computers. Not to mention you then have the wherewithal to make something out of what you've produced, thereby enjoying yet another craft. Talk about enabling. ) Monica CMMPDX2 at aol remove 'eat.spam' to email me --------- "No, that isn't me you saw - I'm not here, I'm incognito!" (Me, Myself & I) Support our Troops!! http://www.wtv-zone.com/kjsb/bataan.html |
#4
|
|||
|
|||
|
#5
|
|||
|
|||
Thanks for all the words of wisdom and encouragement, Monica. I think I'm
going to start again on my third skein tonight, trying the cross winding and Navajo plying. I'll let you all know how it goes! Your description of a Navajo spindle was intriguing. I bought my drop spindle from a craftsman that belongs to the guild -- it was the second cheapest he had at $12. I may explore making my own -- or I could always get my DH to make me one when he finishes taking his Ph.D. exams. . . we'll see. Funny what you said about wanting to spin unevenly -- that's what the presentation was about at the guild meeting!! In light of that, I'm actually trying to keep my thread between thick and thin -- wonder what kind of damage that will do when I'm ready to spin on a wheel. g Off to get busy! Thanks again! :-) Blessings, Myka -- Spam trap hint: contact me at the acronym JustUnderNineOlives = juno |
#6
|
|||
|
|||
"Myka KS" wrote in message ... Thanks for all the words of wisdom and encouragement, Monica. I think I'm going to start again on my third skein tonight, trying the cross winding and Navajo plying. I'll let you all know how it goes! Your description of a Navajo spindle was intriguing. I bought my drop spindle from a craftsman that belongs to the guild -- it was the second cheapest he had at $12. I may explore making my own -- or I could always get my DH to make me one when he finishes taking his Ph.D. exams. . . we'll see. Funny what you said about wanting to spin unevenly -- that's what the presentation was about at the guild meeting!! In light of that, I'm actually trying to keep my thread between thick and thin -- wonder what kind of damage that will do when I'm ready to spin on a wheel. g Off to get busy! Thanks again! :-) Blessings, Myka -- Spam trap hint: contact me at the acronym JustUnderNineOlives = juno Think about Lion Brand HOMESPUN, they make a LOT of money making it thick and thin.... and now Red Heart has one too! Noreen, who is way to busy.... going bananas.... feeling totally overwhelmed.... but that's a whole 'nother "thread" --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.530 / Virus Database: 325 - Release Date: 10/22/03 |
#7
|
|||
|
|||
Myka KS wrote:
Funny what you said about wanting to spin unevenly -- that's what the presentation was about at the guild meeting!! In light of that, I'm actually trying to keep my thread between thick and thin -- wonder what kind of damage that will do when I'm ready to spin on a wheel. g Trust me. Once you've gained some experience at spinning, you'll find it difficult to spin a thick and think yarn! Enjoy it while you can! Judy in MN |
#8
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Antique spinning wheel: INFO REQUIRED | Paul Veen | Needlework | 4 | November 2nd 04 02:51 PM |
Cotton Spinning 1913 weaving vintage FA | Sarah Mc. | Marketplace | 0 | October 29th 04 12:58 AM |
spinning special coming up | Els van Dam | Yarn | 17 | October 12th 03 06:27 PM |
Spinning and Weaving | Neal Rogers | Yarn | 80 | August 22nd 03 10:35 AM |
Spinning tiger drive wheel | Bri | Pottery | 1 | July 15th 03 03:14 PM |